or Join Now!
View all workshops »
home | projects | blog
20 posts in 1900 days
click the marker to see the address
Jet 1000B Air Filtration System
27251 posts in 3095 days
#1 posted 03-19-2011 01:25 AM
Scott, how about posting some pictures of your shop when you get a chance. Tours of other shops are always an interesting post.
By the way let me welcome you to LJs as well.
-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine
#2 posted 03-19-2011 01:50 AM
Thanks Scott. yes, i will post some shop pics probably this weekend; Its in the single car slot of my 3 car garage. I plan on hanging the air filter too so ill post a review as well.
#3 posted 03-19-2011 04:03 AM
Get some help with the filter. I have a PM1200 which is almost identical to your Jet and tried to hang it by myself. But it just can’t be done. I even, for a moment, thought about enlisting my wife but decided that would not work. My sons finally were able to make it over about a week later and I let them hang it while I supervised. This is definitely a two person job.
5482 posts in 2505 days
#4 posted 03-21-2011 05:24 PM
I second the get help hanging the air filter suggestion. I nearly killed myself hanging my Grizzly…
-- My workshop blog can be found at http://daves-workshop.blogspot.com
#5 posted 04-03-2011 07:00 AM
Ok, the wife and I hung the Jet filter 3 weekends ago (first chance ive had to post since then). It went very well. The system comes with eye bolts that you install onto the unit. So after installing those I installed some eye screws in the ceiling and hung the unit using carabiners; this worked great. I have a 8 foot A-frame ladder that was perfect for resting the unit on the top step whle connecting the carabiners to the eye bolts.
The unit is much quieter than I expected it to be. Even on high you dont have to raise your voice to talk or turn the radio up. It comes with a remote that has on-off, timer and speed controls. The timer will allow the unit to shut off after 2, 4 or 8 hours. It has 3 speeds.
So far i give it 5 stars especially for how quiet it is! I will take some decibel readings later and post the results.
#6 posted 04-03-2011 07:46 AM
My Shop Tour:
My shop is in the 1 car slot of our 3 car garage. That pretty much says it all… most of my stuff is small, portable, on wheels, or stored under a bench, etc, etc…. I love everything I have and couldnt be happier with my shop.
Not a great pic but this is it.
Left side: Dust Collector, Rikon Drill Press, Work Bench, Tool Chests.
Right Side: Shelves, Steelex 14’’ Bandsaw, Table Saw, Staining table. Chop saw and Disk/Belt sander under table
Closer view of staining table and stuff stored under it.
This is a Pattern makers vise. I love this thing! it is beefy and the heads swivel to holds odd shape projects. Very usfull. The wood “jaws” have a rubber coating that really grabs your work and keeps it from slipping.
Rikon 34’’ Radial Floor Drill Press The head tilts 45 degree Right; 90 degee Left
SteelEx 14’’ Bandsaw.
Thats pretty much it folks; hope you enjoyed it.
#7 posted 04-04-2011 01:30 AM
Scott, you have put together a pretty nice looking shop. It looks like you have it organized well and putting your power tools on wheels is the way to go for those of us with smaller shops. You have a pretty interesting bench in your shop. This design helps with minimizing the space that it uses and adding the filing cabinets gives you quite a bit of much needed storage.
Thanks for the tour. I enjoyed visiting your shop.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics