| Blog series by scopemonkey | updated 852 days ago | 1 part | 1824 reads | 3 comments total |
Part 1: Dovetail Miter Splines
The first part in doing this, like most miter splines, is making a way to support the work to pass the corner of the miter over the cutter. In this case, I made a sled that goes over the dovetail bit and cradles the box in a V groove. I glued up 3 pieces of 3/4 plywood into one laminated sheet, then cut it square to the dimensions I needed. Then, I ripped it in half with the blade tilted to 45 degrees. Take one of the resulting halves and flip it over and butt the sawn edges together to c...
Pictures of the sled and description of the process.
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
