More details about the Guide nut – where you see the red, that is where I had to trim out part of the thread that prevents the screw from fully advancing as the thread is being cut. If you do this, then you’re creating the wood screw ...
|View schu777's:||home||workshop||projects (0)||blog (14)||reviews (0)||forum topics (4)||buddies (0)||favorites (4)||activity log|
None so far
34 posts in 1844 days
Location: Omaha, NE
Latest Activity | view all »
None so far
Latest Blog Entries | view all 14 »
If you use the router method, you might have to put up with the fact that you might have some “burn” marks on the threads. Think of it this way – do those burn marks affect how the screw works/operates? NOPE – not one bit. It might be possible g...
Now the dowel I used to make the wood screw was not the prettiest – as it had some knots and almost some bark within it – I figured most likely I would be using it for a testing and not an actual screw for the bench. I took the guild ...
I decided that I didn’t need to re-create the tap guide, as the one I had from version 2 sould work just fine. Here you can see the tap inserted into the soon-to-be guide nut. However, prior to this, I found my hole wasn’t quite 90 de...
After having version 2 fail, I kept on the idea that I could do this and figure it out. After the second version, I thought I’d better use my hard maple to make the next version. So I cut out a piece from my 8/4 board and took my hand plan...