sbk's Blog

  • Advertise with us
This blog is written by sbk | 1 entry so far

Latest Entry

Veneer Cutting Board with a Magswitch Clamping Straight Edge

04-06-2011 03:26 PM by sbk | 1 comment »

This 1/4” plywood veneer cutting board is backed with 22 gauge steel. Using this configuration with a straight edge and Magswitches aids in holding and stabilizing one or more pieces of veneer with the straight edge. The photo above shows the cutting board in use with the white melamine straight edge. Hardwood would be a better choice of materials for a straight edge (this was scrape). The straight edge used is 40” long and 4” wide with five 40mm holes for Magswitches. I recommend creating several other sizes of straight edges to handle your cutting requirements. The two smaller straight edges I have are 10” and 24” long. The bottom of each s...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics