LumberJocks

Table Saw Cabinet with router incert and lots of draws.

  • Advertise with us
Blog series by sandhill updated 760 days ago 2 parts 5245 reads 5 comments total

Part 1: Torsion Box Top

773 days ago by sandhill | 5 comments »

Here is my idea of a ultimate work station for and around my cabinet saw. Here is a progression of photos as I build each stage.First is the cabinets with where the router will be there are 6 adjustable feet that allow me to adjust from “0” to about “2” inches so every surface will be perfectly level with the Table saw.. Next is the top torsion box that will support the fence out to 54” Here you can see the top on the torsion box this will give me a surface 5...

Read this entry »


Part 2: Whats an out-feed table without a Panel Sled?

760 days ago by sandhill | 0 comments »

As I mentioned in the last comment of part 1 I am not going to place the router into the cabinet with the table saw so I moved on to the out-feed table. Its a real simple set up 3/4” Birch ply with a 3” oak border and oak stiffeners ever 12” the legs are 3/4” plywood as well. I removed the angle iron on the out feed side of the saw that’s part of the Biesemeyer 54” fence and used the bolts to secure the out-feed table to the saw and 2” screws ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase