| This blog is written by sandhill | 44 entries so far |
-
Got me a Pot #1: eBay score
I have been looking for a glue pot for some time now and finally found one so this post is a two ...
-
Work Bench #2: I have been busy building a new work bench
In between jobs I have been building a new work bench milled from 8/4 and 12/4 maple hard and...
-
A week at AFSM as well as meet some Jocks #1: This is about how the week went
Me some of the exercises The vault. Stacks of veneer of the highest quality Patricks Sh...
-
My shop #4: I may even have a ceiling soon
I spent the day finishing up the cribbing and putting up the six electrical boxes for the lightin...
-
Thank you my friends on LJ #1: Its looking a lot like Christmas
Thank you for the good wishes to my wife and my self from LJ’s and AFSM. My wife’s su...
-
Work Bench #1: What parts of a work bench are most important?
Now that I have finished the CHEVALET I need desperately to get the work bench done so here are m...
-
ASFM applications are in
I sent in our applications for ASFM today for Feb 11th for both me and my wife. It will be good t...
-
New router table for the new shop
When I moved to my new shop I gave my old router table to someone in Florida that really need...
-
Table Saw Cabinet with router incert and lots of draws. #2: Whats an out-feed table without a Panel Sled?
As I mentioned in the last comment of part 1 I am not going to place the router into the ...
-
Table Saw Cabinet with router incert and lots of draws. #1: Torsion Box Top
Here is my idea of a ultimate work station for and around my cabinet saw. Here is a progression o...
-
My shop #2: Cabinet system for the Shop
Sorry this is so longNow that all the electric is done, insulation, walls up and painted I ca...
-
My shop #1: Shop update - Two months gone by since last update.
Its been two months since the last update and five months since I started to build the shop. Its ...
-
The electric is done and the inspection passed now on to the sheet rock.
Almost done with the electric. I forgot to replace the outlet for the garage door..duh. But the ...
-
You never know until you do it.
This has been a big project for me to do at my age but I really do enjoy the fact that it will be...
-
Part 3 - Project update Electric is just about done and equipment is placed.
Two of the videos I posted here I go back and watch over and over because of the insperation they...
-
A little puzzle about grounding feed back is welcome
As you can tell in this video I am a little puzzled and working to a solution for grounding of eq...
-
My shop #3: Join me as I try to work out the details of building a new shop
Here is the new shop skeleton with only 120VAC outlets and two lights. I am hoping that any of yo...
-
Anyone know about this Bench
Does anyone or has anyone seen this from Garrett Wade? Do you think its a good deal?Bench
-
Arts & Crafts Living room #1: Short update on two projects
I shot this little video to give an update on the two projects I have been working on between run...
-
Sam Maloof inspired rocking chair #2: First try at the Maloof joint **Project on hold pending move**
Not having done this before it was a bit of a challenge to do I hope the joint is tight enough af...
-
Sam Maloof inspired rocking chair #1: Part #1 My most complicated project to date
This may be a bit early to post this with 2 large projects in the works but I just couldn’t...
-
I give up looking for
Some time back I was talking to someone about classes that a guy somewhere around Fredericksburg,...
-
I have a question about something not related to wood #1: Can anyone give me any guidance on this?
I am looking at a home in VA but cant seem to find an internet provider for DSL or FIOS, only sat...
-
Thread Removed
Removed no longer relevant.
-
Thread removed
Removed no longer relevant.
-
Estate sale find #1: Are they worth rebuilding?
` I want to thank my wife for finding these two wood planes at an estate sale on Sat 4/1/2011 ...
-
Bedroom Set #4: Last stages og the night stands
Well its been a long time in the works but I am finally in the home stretch, life gets in the way...
-
Sorry for posting this but it needs to be addresses #1: Do you have the need or the room
52 thoroughbred horses need homes. Will go to Sugarcreek this Saturday for slaughter. The Gentlem...
-
I
I
-
Thickness Planer or Drum Sander #1: Would you do this?
First: I have a 20” 900 pound Grizzly thickness planer that has been taking up a lot of roo...
-
First video- DON'T GIVE UP MY DAY JOB
I wanted to say hi to everyone and show you a preview of my shop and what I have to deal with whe...
-
Bedroom Set #3: Finally after changing my mind 3 times!
First it was CHERRY panels then it was Quilted MAKORE. That did not work because of the color var...
-
Bedroom Set #2: Side panels allmost ready for assembly
I am laying out the legs now to accept the panels and railsThis is where the center stile will fi...
-
Bedroom Set #1: We have been needing a new bedroom set for years
Sept 4 2010I have started a pair of night stands for our bedroom after they are done I will make ...
-
Thread removed
Removed no longer relevant.
-
New to Wood Carving #1: I have never attempted to do wood carving.
I have never attempted to do wood carving other than some chip carving but lately I have been fas...
-
Blanket chest #1: Three blanket chests for my grand Daughters
I am building my first blanket chest and I started with the top. After putting the top together f...
-
Trying out the router table and bit from Charles Neil
I scored some tiger maple, cherry and white oak yesterday and just had to try out the new router ...
-
Just added a PinnAcle fence and dust ports
I have been wanting to get this project completed for some time and now its on its way to being d...
-
Quarter Sawn White Oak
Well I am starting a new project and would like some input. After seeing to price of QSWO I was s...
-
From start to finish, as I get the photos I will ad to it..
Here is a project which I had been putting off until I had the cash to buy all the stock for buil...
-
.
.
-
Exotic Wood
While in transit back to Florida from NY I stopped in Maryland at an Exotic Lumber supplier and I...
-
Ceramic band saw guides; do they really work better than conventional bearing type? #1: I will be installing ceramic guides and a 1" re-saw blade let’s see if it makes a difference.
Blade guides for band saws are designed to aid the blade’s ability to resist deflection at ...
