I have been wanting to get this project completed for some time and now its on its way to being done. I built this about a year ago and it had served well but it was difficult to set up without a fence until now. I picked up the PinnAcle fence on closeout at Wood Craft and got the dust port parts while I was there as well.
I had the T-Slots so I put them in and I will make some feather boards tomorrow and install the front T-Slot for that T-slot then one day this week I will go back to Wood Craft and get the material for the face of the fence!
So this is where it is so far any ideas for additional features are welcome.
The last photo is of tiger maple I used Charles Neils cutting bit and I just love it.
-- "watch your fingers and your toes, keep your goggles on your nose".
10 comments so far
Ecocandle
home | projects | blog
1014 posts in 871 days
#1 posted 750 days ago
I do love a beautiful router table. Well done.
-- Brian Meeks, http://extremelyaverage.com
thelt
home | projects | blog
471 posts in 1184 days
#2 posted 750 days ago
Very nicely done. You done good, Bob.
-- When asked what I did to make life worthwhile in my lifetime....I can respond with a great deal of pride and satisfaction, "I served a career in the United States Navy."
bigike
home | projects | blog
3919 posts in 1093 days
#3 posted 749 days ago
cool router table.
-- Ike, Big Daddies Woodshop, http://www.icombadaniels@yahoo.com
Edward E Nock II
home | projects | blog
74 posts in 1949 days
#4 posted 749 days ago
Good job…..Mine is very similar w/ a miter gauge slot running the full length/width in front of the router. This alows for various jigs. Mine came from Woodhaven w/ the miter slot, I added the two “T” slots for my shop built fence.
When are you comming this way? ED
-- ED NOCK
sandhill
home | projects | blog
1629 posts in 1729 days
#5 posted 749 days ago
Thanks everyone,
I like the T-Slot idea for a miter gauge. Good idea for cutting dove tails huh?
-- "watch your fingers and your toes, keep your goggles on your nose".
sandhill
home | projects | blog
1629 posts in 1729 days
#6 posted 749 days ago
Ed I got that T-Slot in for the miter great idea.
-- "watch your fingers and your toes, keep your goggles on your nose".
thelt
home | projects | blog
471 posts in 1184 days
#7 posted 746 days ago
Great job, sandhill
-- When asked what I did to make life worthwhile in my lifetime....I can respond with a great deal of pride and satisfaction, "I served a career in the United States Navy."
Edward E Nock II
home | projects | blog
74 posts in 1949 days
#8 posted 738 days ago
LOKING GOOD IN THE NEIGHBOURHOOD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I’m in Atl. visiting family.
I’ll be in my shop next wk. I’m going thru withdrawl .No sawdust, no cuts or splinters,or mistakes.
ed
-- ED NOCK
sandhill
home | projects | blog
1629 posts in 1729 days
#9 posted 738 days ago
I will be leaving on Tue the 19th to pick up the wife a Regan International on the 20th coming in from Heathrow if all goes well, rehearsal diner is on the 21st and the wedding is the 22nd Family Crab fest is the 23rd and back to Fl the 24th for the wife to go to work the 26th, Whew! Then it starts all over on June 19th. ending July 11th when everyone goes home.
-- "watch your fingers and your toes, keep your goggles on your nose".
Edward E Nock II
home | projects | blog
74 posts in 1949 days
#10 posted 738 days ago
The best part is the CRAB FEAST!!!!!!!!!!!!!
ed
-- ED NOCK
Have your say...