LumberJocks

rweitz's Blog

  • Advertise with us
This blog is written by rweitz | 17 entries so far

Latest Entry

ZCI for vintage Craftsman 113.298341 #1: Time to replace the first go at it.

1027 days ago by rweitz | 2 comments »

I have an old Craftsman with a funky insert. It’s aluminum ( I used to think steel) about 3/32” thick and “D” shaped. I have not found any one anywhere that makes a compatible insert that I can buy. The lip on the insert is so thin that conventional insert instructions just won’t hack it. I took some acrylic and made an attempt at a ZCI: and it worked for a while but was a bear to make. The acrylic is starting to crack and I’ve hacked away some of the edges of the clearance so it’s not really so much zero anymore… So I took out the old insert that came with the saw and looked again at making an insert for the insert.First I got some...

Read this entry »

Older Entries

View all 17 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase