LumberJocks
DAILY DEALS Pen Press/Drilling Jig  |  Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit

Lumber Jocks, California [West Coast] meeting/get-to-gether

Blog entry by rustfever posted 84 days ago 364 reads 0 times favorited 18 comments Add to Favorites Watch

Calling all Lumber Jocks on the West [Left] Coast. What say we try to have a get-to-gether?

Sacramento? Bay Area? This Fall? or next Spring?
What about during the Woodworking nshow in Sacramento mid November?

Ira

aka —Rustfever

-- Rustfever, Central California


18 comments so far

View a1Jim's profile

a1Jim

16928 posts in 474 days


posted 84 days ago

Now were getting closer to a get together I can attend. It would depend when and were before I could commet. The further north the more I would like it.

-- Jim from Heirloom Woodshop Southern Oregon

View PurpLev's profile

PurpLev

2760 posts in 545 days


posted 84 days ago

Labor day weekend I’m in LA, so Im good to go ;) just name the place and I’m there! (what? too soon?)

-- When in doubt - There is no doubt - Go the safer route.

View rustfever's profile

rustfever

130 posts in 207 days


posted 84 days ago

Let me work out a few details. Maybe we could meet at the Woodcraft store. They are about 15 minutes from the Sacramento Convention Center. That is the location of the Woodworking Show, Mid November, 2009. I am sure Woodcraft would be a sponsor.

-- Rustfever, Central California

View gizmodyne's profile

gizmodyne

1678 posts in 986 days


posted 84 days ago

Purp.. If you come to LA you should come by….

-- -John "Do I have to keep typing a smiley? Just assume it's a joke." www.flickr.com/photos/gizmodyne

View Alonso's profile

Alonso

66 posts in 135 days


posted 84 days ago

Purplev,

what part of LA?

-- Norwalk, CA 90650

View PurpLev's profile

PurpLev

2760 posts in 545 days


posted 84 days ago

(sorry for the hijack…lol) – I’m going to be in Canoga Park, and Venice

-- When in doubt - There is no doubt - Go the safer route.

View rustfever's profile

rustfever

130 posts in 207 days


posted 84 days ago

The ‘Woodworking’ show in Nov 13/15, 2009 at the Sacramento Convention Center, 1400 J st. Sacramento.

-- Rustfever, Central California

View CaptainSkully's profile

CaptainSkully

495 posts in 455 days


posted 84 days ago

I’d be happy to get together and/or bring some stuff to a show. I’m in the Oakland Hills, so anything in the Bay Area up to Sacramento is cool with me. Napaman? WineCountryWhimsy?

-- You can't control the wind, but you can trim your sails

View John Ormsby's profile

John Ormsby

503 posts in 633 days


posted 84 days ago

Sounds like fun. Sacramento works for me.

-- Oldworld, Fair Oaks, Ca

View reggiek's profile

reggiek

717 posts in 167 days


posted 84 days ago

Rustfever – That would be great. I would probably get to it…depending on schedule…coming from San Luis Obispo area the location is not an issue….It would just be my work schedule that might interfere….

Purp and CA jocks…Purp if you get up and around Santa Barbara during the holiday weekend…maybe we could get a few Jocks together to have a quick visit….LA is a bit of a stretch for me these days – I do get to Santa Barbara on occassion…and it is less crazy then LA…...but If you don’t get a chance to make it up north a bit…make sure you get to visit some of the So Cal Jocks….It would be great to put some faces with the folks we meet on this great media

-- Woodworking.....My small slice of heaven!

View socalwood's profile

socalwood

968 posts in 501 days


posted 83 days ago

Folks are always welcome here – we are above San Diego and below Los Angeles , halfway in between.

View WayneC's profile (online now)

WayneC

6034 posts in 994 days


posted 83 days ago

I will most likely be able to go to the Sacramento Woodworking Show. Glad you posted, was not aware there was one in Nov.

-- We must guard our enthusiasm as we would our life - James Krenov

View rustfever's profile

rustfever

130 posts in 207 days


posted 83 days ago

Jim, Heirloom, Riddle OR….what the heck, it is only 360 miles each way to the Sacramento convention Center. Just a quick little drive.
Seriously, it would be great if you could make it down. I, and I am sure a lot of the other California Jocks, would love to meet you and exchange ideas and experiences.
Ira
209 552 9583 cell

-- Rustfever, Central California

View Blake's profile

Blake

2760 posts in 771 days


posted 83 days ago

I’ll probably be at the wood show in Sac this year, (I missed it last year). That’s probably the best plan.

-- Check out my new website! http://www.blakeweberwoodworking.com

View MedicKen's profile

MedicKen

470 posts in 359 days


posted 83 days ago

OK i’m in. Well, that is depending on the actual date that is decided upon. I need at least 30 days notice so I can get the time off work.

-- My job is to give my kids things to discuss with their therapist....medic20447@gmail.com

View Kindlingmaker's profile

Kindlingmaker

1475 posts in 423 days


posted 82 days ago

MickeyD and I would also like to attend depending on what’s happening with work…

-- Never board, always knotty, lots of growth rings

View patron's profile

patron

2442 posts in 238 days


posted 82 days ago

when you figure out the plan ,
with enough lead time ,
i’ll make it ,
if work allows .

-- david ,new mexico ,allheart

View eddy's profile (online now)

eddy

288 posts in 261 days


posted 82 days ago

OK if David can drive from new Mexico i better try to make it
again depending on work and such

You must be signed in to post the comments.

  • View all advertisers
  • Advertise with us

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase