LumberJocks

ruddy's Blog

  • Advertise with us
This blog is written by ruddy | 3 entries so far

Latest Entry

Inlaid Wooden Hinges #3: Glueing the inlays.

708 days ago by ruddy | 15 comments »

This is now the home stretch….not long to go.1. Left hand side base inlays. These inlays are going to be glued into the base. Make sure that they slide in easily before applying glue. Remember which face is the reference!I use drills of the correct diameter to get the centreline of the hinge pin in the correct position. The centreline should be on the mid point of the over lap which is about 8 mm. In this case I set the centreline at 4 mm.When I have glued these base inserts previously I used some Titebond3 glue as it has a long set up time.On this prototype I used Gorilla glue because I had run out of Titebond. I think the set up time for Gorilla is about 4 nanoseconds because I ba...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase