Tool Tip #16: Pull saw at work

  • Advertise with us
Blog entry by robscastle posted 10-20-2014 11:12 AM 1254 reads 0 times favorited 4 comments Add to Favorites Watch
« Part 15: Flattening Timber Part 16 of Tool Tip series Part 17: Hollow Chisel Mortiser HCM Chisel Tune Up »

I have a small pull saw and its a great asset in the wood tool kit.
Today I was making a Walnut Key Holder and in the production of it I needed to cut a small piece from the key to square off the key stop.
As it was right in the radius of the key slot I decided to see if my pull saw would do the job.

This is a close up of the final result.

I was very happy with the result, and with a little sanding later it will look OK.

So there you have it a pull saw at work and the results achieved.

So if you were thinking of adding a Pull Saw to the tool kit, simple job to help you decide.

-- Regards Rob

4 comments so far

View stefang's profile


15953 posts in 3484 days

#1 posted 10-20-2014 11:26 AM

Well done Robert and a good suggestion. I have some Japanese pull saws and I find them very handy at times.

-- Mike, an American living in Norway.

View BobWemm's profile


2534 posts in 2075 days

#2 posted 10-20-2014 02:49 PM



-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Joe Lyddon's profile

Joe Lyddon

10266 posts in 4202 days

#3 posted 10-20-2014 11:00 PM

You Pulled off a good one this time! LOL

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

View David Dean's profile

David Dean

608 posts in 3048 days

#4 posted 10-21-2014 01:26 AM

great job.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics