|Blog series by Randy Price||updated 09-10-2011 06:33 PM||7 parts||18075 reads||10 comments total|
See the preliminary sketch of A Modern Prairie SconceThanks for looking, Randyhttp://www.randallprice.com
In the last post was a short video of preliminary drawings of a Modern Prairie Sconce. In this post see a video of part one of how the sconce was built.Thanks for looking, Randyhttp://www.randallprice.com
The parts are cut out and I am applying the finish – before assembly. I am finishing before gluing up because it would be difficult to apply the finish after assembly, especially between the slats. Watch the video to see the finish I’m using and what is in store for part 3.
The finish is applied and and I am assembling the sconce. Watch the video to see how the sconce is put together and what is in store for part 4.
In Part 4 see how the electrical components of the sconce are installed as it is lit up for the first time.
In Part 5 see how the lamp shade is laminated and fitted to the shade frame.
In part 6 I finish the completed Modern Prairie Sconce.