LumberJocks

Craftsman 113 table saw upgrades....

  • Advertise with us
Blog series by rhybeka updated 04-21-2015 01:23 PM 5 parts 17216 reads 29 comments total

Part 1: Not a true blog...

05-03-2014 01:57 AM by rhybeka | 13 comments »

I’m feeling a bit overwhelmed looking at all of the possible/plausible/necessary upgrades that I need/want to do to my table saw (and other tools but this one takes precedence). So I thought well… I should probably put them in some kind of order – not necessarily in any order – maybe somewhat necessity? As a newb, I just want to make sure my equipment is running as well and as safely as it possibly can. It’s already in great condition for it’s age and I&#...

Read this entry »


Part 2: Fence

05-04-2014 04:49 AM by rhybeka | 1 comment »

Out of curiosity I priced out Hutch’s fence parts and came up with about $260 for the main parts. I added a few more things to my order than he did (extra screws, slot covers, etc) so overall it was about $275. Not bad! 020 T Slot Linear Bearing Brake Kit 40 S 40-6800 NQuantity: 1$13.758020 Inc 3×3 T-Slot Aluminum Extrusion 15 Series 3030×36 BlackQuantity: 1$46.718020 T Slot Aluminum Linear Bearing 15 S 6816 NQuantity: 1$58.958020 T Slot Aluminum Brake Kit Ready Linear Bear...

Read this entry »


Part 3: Revised list... take 1 and 2

05-15-2014 11:05 AM by rhybeka | 0 comments »

parts borrowed from EE’s post on my first blog, and built on :) 1. Fence -nice recommendations on the last two posts – just have to save my pennies 2. New Blade(s) – combination blade and plywood blade are working superbly well 3. Shark Guard – struggling with installation but I have it :D 4. PALS / Link Belt – have a link belt but I’m not sure why I thought I needed it for the TS – it’s a direct drive. 5.Miter Gauge – will wait o...

Read this entry »


Part 4: So it begins...

04-13-2015 09:29 PM by rhybeka | 7 comments »

1. Fence – going with Hutch’s aluminum extrusion fence. Have all of the parts – just need to assemble and drill necessary holes 2. New Blade(s) – combination blade and plywood blade are working superbly well (DONE!) 3. Shark Guard – still working on getting the installation good a year after purchase (with school and graduation thrown in there). I can get it installed, but it doesn’t line up properly with the blade – and has a tendency to fall to one side o...

Read this entry »


Part 5: Revision galore!

04-21-2015 01:23 PM by rhybeka | 8 comments »

1. Fence – going with Hutch’s aluminum extrusion fence. installation process has begun! 2. New Blade(s) – combination blade and plywood blade are working superbly well (DONE!) 3. Shark Guard – installed and awaiting test run 4. PALS / Link Belt – don’t need either of these items since my saw is direct drive/mount. 5. ZCI’s 6. crosscut sled? 7. New ts base

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com