Slow going, I know, but I finally had a chance to make some headway on this project today. My work area has changed to our back sunroom since the garage is officially too cold to get anything to dry in a decent amount of time :D I’m kind of winging it since I’ve really parted ways from the original plan on the interior of the case. I’ll have to see if I can upload a picture of my sketchup draft. Here’s what it looks like currently – the clamps are holding in the 1/4 shelf jig strips I glued in earlier.
So the question I’m forming is regarding the doors…they’re due to be flush with the front frame, but of course since my interior dimensions have fluctuated a bit, my doors aren’t centered on the center case divider. I’m trying to decide what to do about this. I’ll take any and all suggestions. The doors themselves are just pocket hole screwed right now – I wanted to be able to eyeball the situation and take pictures :)
-- Beka/Becky - aspiring jill of all trades, still learning to not read the directions.