LumberJocks

rhybeka's Blog

  • Advertise with us
This blog is written by rhybeka | 78 entries so far

Latest Entry

Venturing into Parts Unknown - Hand Tool/Plane Storage #5: Dutch Tool Chest - shiplapped back

08-11-2017 07:10 PM by rhybeka | 0 comments »

I got excited a few months back because I’d just acquired a large portion of old s4s 3/4” pine boards from a friend who was dismantling some shelving. I wasn’t ready to start on dovetailing the bottom and sides together so I thought I’d start with the rabbets on the back pieces, and I could rip the last piece down so it could be at proper width once everything else was done. Seems fairly straight forward, no? I set my Stanley 78 up for 1/4” wide by 3/8” deep rabbets, grabbed the boards I’d cut to rough length and away I went. I made sure I marked each end of each board so I knew which way to orient them in the end. I’ve got them roughly t...

Read this entry »

Older Entries

View all 78 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com