LumberJocks

Custom Cabinet Construction #5: Furniture Bath Vanity

  • Advertise with us
Blog entry by rhett posted 09-05-2013 10:58 AM 2036 reads 1 time favorited 2 comments Add to Favorites Watch
« Part 4: Where planes soar in a modern shop Part 5 of Custom Cabinet Construction series Part 6: Woodworkery vanity sides »

Doing a commission for a local architect with whom I’ve worked before. Furniture grade cabinetry or cabinet grade furniture, call it what you will, this is what I’m building.

Her borrowed design, tweeked by me. Thought I’ld try to keep track and post photos for other woodworkers. Should be an easy build. The bridle joint at the top of the legs should be fun. This cabinets could easily be adjusted to fit in any bath.

Fortunately she is wanting a light colored hardwood, so I was quick to suggest ash.

These sticks and sheets of veneer core, ash plywood will be the materials used.

Pocket holes (GASP) and dominoes (OHH) will be used in the construction as well. This is a bathroom cabinet after all.

I’m starting in with the side panels. All the wood is 8/4 and the center panel is a full 3/4” thick.

Be Good
Rhett

-- Doubt kills more dreams than failure.



2 comments so far

View Don W's profile

Don W

17971 posts in 2035 days


#1 posted 09-05-2013 12:23 PM

That’s a pretty beefy vanity. Looking forward to your process.

-- Master hand plane hoarder. - http://timetestedtools.net

View Tugboater78's profile

Tugboater78

2450 posts in 1659 days


#2 posted 09-05-2013 05:38 PM

Yer ash pile shrunk!

-- "....put that handsaw to work and make it earn its keep. - summerfi" <==< JuStiN >==>=->

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com