LumberJocks

Reviews: Grizzly G0690 10" 3 HP Cabinet Saw

  • Advertise with us
Happy, after some difficulties

Happy, after some difficulties

05-01-2018 01:42 PM by Pixxture | 4 comments »

Had some difficulty obtaining the saw from UPS freight, Grizzly’s chosen freight provider, at least in my area. UPS could not deliver because:Day 1: I could not be home from 7:30 to 6:00 waiting for delivery, I had to be out for 3 hours that day.Day 2. It was snowingDay 3. It might snowDay 4. Tailgate brokenDay 5. Turbos on truck brokenFinally the saw was delivered. As difficult as UPS freight is to deal with their drivers are TERRIFIC. I gave the driver a hefty tip for rolling it into the...

Read this review »


Off to a rocky start S&H

Off to a rocky start S&H

03-24-2017 01:54 PM by meaznet | 14 comments »

First of all, I love this machine. It’s been great, had it since Christmas. But it didn’t start off that way. I’ve had a few problems right from the start. As you can see from the first picture it’s a beautiful saw, just doesn’t have the Fence installed. Thats because it was shipped with the fence for a G0771. Worked with Grizzly support and let them know of the shipping mishap and they took care of it without a problem. I also found a few other problems; ...

Read this review »


I finally made a decision on a saw.

I finally made a decision on a saw.

01-16-2016 05:00 PM by Ken90712 | 30 comments »

As a few of you know I have been on the fence so to speak on getting a new saw for some time now. I read and read and read on which one to get. I had it narrowed down to this and a Sawstop. We all know about the great safety features on the SS. They also build a great saw. However I finally made a decision on the Grizzly G0690 3hp 220 volt with the cast iron router table extension. I have a small shop so the router table is a no brainer for me. Money was somewhat a consideration although ...

Read this review »


Great performer. Zero problems. 5 stars.

Great performer. Zero problems. 5 stars.

10-05-2014 03:40 PM by JSB | 14 comments »

I bought the Grizzly G0690 about 6 months ago and feel like that’s enough usage to talk about my thoughts. It’s a damn good saw. I don’t have any major complaints after using it for this long. Just a couple nit-picky things that I don’t think justify bringing this down from 5 stars. After comparing prices on similar spec saws I would definitely buy this saw again if I had to do it all over. Pros:strong motorgreat fencelarge cast surfacebest value compared to other b...

Read this review »


Grizzly G0690 even with problems still good value

Grizzly G0690 even with problems still good value

04-05-2013 04:49 AM by pjones46 | 46 comments »

Based on many of the reviews I have read, the Grizzly G0690 Cabinet saw was the best bang for the buck. As there have been many reviews given I will only add a few comments to those that I have read. The saw arrived without a ding, dent or missing part and went together well. I was very disappointed with wiring as it appeared to be only 14 gauge wire with a 220 plug configuration I had never seen. I had my electrician rewire it completely with 12 gauge wire and use a more conventional tw...

Read this review »


Grizzly G0690 Sawed in Alabama

Grizzly G0690 Sawed in Alabama

07-22-2011 06:40 PM by woodmaker | 22 comments »

I finally have 220 in the shop now and cut my first piece of wood with this saw.Only a 2×6 but it went through the saw like warm butter. I was very pleased.Vibration is near zero and the saw is very quite; I was surprised as to just how quiet. This is my 3rd table saw all others were big box bought portable contractor type. I’m not going to repeat all the specs again, most folks here already know about this saw. As far as the cosmolene there was very little actually; I was...

Read this review »


Kudos to Grizzly for an easy Saw to set up

Kudos to Grizzly for an easy Saw to set up

05-21-2011 07:38 PM by lilredweldingrod | 53 comments »

This review is just for unloading and assembling the Grizzly G0690 10” 3hp cabinet saw. and I will say that most of you will not need the manual at all as far as assembly is concerned. I was very impressed with the construction and workmanship of this saw and the price wasn’t bad either. After getting the saw on the ground and in the shop, we unpacked and checked for any damages. The way they pack these things, is almost impossible to receive damage in normal handling. Everything ...

Read this review »


Grizzly G0690 vs. G0715P

Grizzly G0690 vs. G0715P

05-15-2011 11:24 PM by Alpiner | 17 comments »

If you had read my previous review of Grizzly’s G0715P hybrid saw that I received week before last, you know that I had a serious unsafe issue with it, and I received permission from Grizzly to return it. It’s been reboxed, and will be picked up by UPS freight Tuesday. I was leery of getting the same saw again, so I went ahead and ordered a new G0690 cabinet saw, which is what I was considering ordering in the first place. I just wasn’t sure if the $500 price difference w...

Read this review »


Grizzly Cabinet Saw Review G0690

Grizzly Cabinet Saw Review G0690

01-15-2011 06:05 AM by Sherwood | 13 comments »

I’ve used LumberJocks extensively to look at reviews of tools so I thought I would join and contribute with some content of my own. I purchased this table saw about 2 months ago and have been happy with my decision. Grizzly has recently started to ship to Canada so this has opened another possibility with regard to the saws I looked at. In summary I considered General, Delta, Jet, SawStop and decided on Grizzly because of the value for the money and I like the company and owners stor...

Read this review »


Great saw. The Grizzly G0690

Great saw. The Grizzly G0690

11-26-2009 03:47 PM by MoreWoodPlease | 26 comments »

This is a great saw. $1250.00 no shipping, no tax. 3hp, riving knife, left tilt, bessimeyer style fence, solid construction, three belt, 240v. In the pic, I used some weather stripping to seal the motor door, better dust extraction, also seal the lower pan in the cabinet. I ordered the Heavy Duty Shop Fox base by mistake. The base is too big for this saw, so I cut 2 1/4 from the long rails of the base with a recip saw and a metal cutting blade. The result is a much heftier base than the...

Read this review »


1 2 next »
12 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com