LumberJocks

Reviews: Ridge Carbide Tool Ultra TS2000

  • Advertise with us
Ridge Carbide Ultra TS2000-5/64" UTK version

Ridge Carbide Ultra TS2000-5/64" UTK version

59 days ago by wfedwar | 1 comment »

This review is for the 10-inch, 48-tooth, ultra thin kerf (5/64”) version of the TS2000 blade. I have used a number of different blades including cross cutting blades up to 96 tooth and ripping blades down to 24 tooth. Most are freud, some are dewalt,one delta, etc… This is my first Ridge Carbide blade. I got the 5/64” version because I am using a fairly underpowered Ridgid TS3650 contractor saw. I’ve always used thin kerf (3/32” or thereabout) with the sa...

Read this review »


Ridge Carbide Tool Ultra TS2000 Saw Blade

Ridge Carbide Tool Ultra TS2000 Saw Blade

553 days ago by BigDawg | 16 comments »

When I first bought my Ridgid TS3650 table saw, I knew that it would need a good blade to allow this saw to reach its full potential. I bought the Freud Fusion 40 tooth combination blade (3/32), and the Freud 24 tooth (3/32) glue line ripping blades. They both work very well. Bevels, miters (with miter gauge), and rips are done without taxing my 15 AMP motor too much. However, here is the kicker! I then purchased a Ridge Carbide Ultra TS-2000 48-tooth general-purpose blade (3/32 kerf). And...

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase