LumberJocks

Reviews: Oneida Super Dust Deputy

  • Advertise with us
Super Dust Deputy

Super Dust Deputy

08-28-2014 02:12 AM by Tennwood | 4 comments »

I modified my DC system for the ‘nth time, this time replacing my Woodcraft garbage can cyclone lid for the Super Dust Deputy. The trash can lid did fine but I was still getting a lot of dust and chips into the bag and filter. I really hate changing the bag and cleaning out the filter. It is a dirty messy job that kind of defeats the purpose when dust is going everywhere in the shop just to get the bag off, and to take the filter off to get it outside to clean. So I bit the cost and modif...

Read this review »


Super Dust Deputy cfm loss

Super Dust Deputy cfm loss

01-29-2014 11:40 PM by secretgarden | 8 comments »

I have a Jet 1200, a 2 hp with a 12 inch impeller attached to a Super Dust Deputy (SDD) sitting on top of a 55 metal drum. I used a Alnor anemometer Model RVA+ to measure the velocity and calculated the cfm at different duct set ups and found no meaningful loss of cfm. Measurements as follows; 1. Measured at the 6 inch intake with a cheap metal 90 degree elbow (after removing the two 4 ” port) measured velocity at 5700 fpm/cfm 1114 2. same as above but with 3 cheap 6 ”...

Read this review »


Dust Collection Upgrade

Dust Collection Upgrade

02-05-2013 07:12 PM by TheDane | 20 comments »

I have wanted a two-stage dust collection system for some time, so decided to take the leap and order an Oneida Super Dust Deputy. The Super Dust Deputy (SDD) was well packed and everything (SDD, installation bolts, foam gasket, and the 5”-to-4” and 6”-to-4” reducers) was packed in a single box surrounded by plastic and foam. Because of the lid I opted for, I substituted the bolts Oneida provided with 1/4” x 20 tpi x 2 1/2” that I had on hand in the shop...

Read this review »


Oneida Super Dust Deputy

Oneida Super Dust Deputy

07-16-2012 09:48 PM by tme4tls | 17 comments »

I have been fighting with my Oneida Pro 2000 since I bought it. Seems a lot of dust passes the cone and lands in the filter clogging it and making dust collection inefficient. So much so I have to take the filter outside at least once a week and blow it out with an air line the reinstall. For my drill press I purchased a Dust Deputy and use it on with a shop vac. It works wonderfully. There isn’t enough material that gets by the Dust Deputy to measure in the shop vac, so I conclu...

Read this review »


Super Dust Deputy Add on for 4" DC systems

Super Dust Deputy Add on for 4" DC systems

05-06-2012 01:54 AM by TechRedneck | 12 comments »

While researching this product, I noticed that there was not a review on LJ’s for this specific model of cyclone. I have a smaller ClearVue Mini and absolutely love it, however there were few choices on the market for cyclones specifically made for the majority of small DC systems out there in the 1-2 HP range. I think that Oneida has something here for that niche market. In fact, I am surprised yet pleased that they made one of these available because it can directly compete with ...

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase