LumberJocks

Reviews: Grizzly G0715P 10" 2HP Hybrid Saw 30" rip

  • Advertise with us
What did I get myself into?

What did I get myself into?

1207 days ago by Alpiner | 72 comments »

I recently sold my 15-year old Jet contractors saw on Craigslist with the intention of upgrading to Grizzly’s new hybrid saw. I was tired of the extraneous sawdust the Jet produced even though I had the saw connected to a 2 HP Grizzly dust collector. Other than that, the Jet came perfectly set up, and I never had to make any adjustments through its 15 years of dedicated service. I received the new Grizzly G0715P this past Tuesday, and had a neighbor assist me in locating it to my b...

Read this review »


Barely cuts 3/4 inch oak ISSUE RESOLVED!!

Barely cuts 3/4 inch oak ISSUE RESOLVED!!

345 days ago by Mongolas | 63 comments »

Okay, so after not having a table saw for about 4 months since we moved and had to leave my brother’s 89 dollar pro-tech saw behind, my wife finally decided to get me the Grizzly G0715P. All in all, I would rate the actual saw a 4 out of 5. I gave it 3 stars because of the lack of power. I found an extention cord, cut to a shorter length, to act as my wire for my 110v re-wire, since the apartment I’m in said I can’t install a 220v outlet for it. so I got the 6 dollar cir...

Read this review »


Grizzly G0715P newbies point of view.

Grizzly G0715P newbies point of view.

1186 days ago by gillyd | 39 comments »

First off, I’d like to say a few things to give you a bit of context around my review. This is the first table saw I have ever owned, so I have nothing to compare it to. I have been using it now for 4 months, I meant to write a review right away, but I am glad that I waited as my feelings for the saw have changed a bit. Now on to the review. Price: $859 Assembly Time: 5 hours. —————————————- ...

Read this review »


Returned

Returned

174 days ago by JSB | 37 comments »

UPDATE 1 After one week of use the EXACT same problem I was having with the Ridgid appeared. I’m waiting on Grizzly to see how they handle this situation. The blade misalignment when lowering and raising the blade is worse than it was on the RIDGID. It’s so strange that it takes a few days worth of use for this to show up. The exact same problem with two completely different companies. I’m cursed. I shot a video this time of the problem. You can see it here:https://www.youtu...

Read this review »


Polar Bear in Arizona (4-1/2 stars)

Polar Bear in Arizona (4-1/2 stars)

1302 days ago by paulzall | 28 comments »

- Delivery and Assembly: I recently bought a Grizzly G0175P Hybrid Table Saw, mainly to get dust collection capability with relatively low operating noise, and I wasn’t disappointed. Delivery was prompt and the packaging was effective with no visible damage. Lacking a forklift or loading dock in my garage, I did have to pay Grizzly an extra $34 freight charge for lift gate delivery. Fit and finish at first glance looked excellent. The components, including the 2 hp motor,...

Read this review »


Grizzly G0715P Table Saw

Grizzly G0715P Table Saw

900 days ago by Paul | 27 comments »

And so it starts….. Hello Folks! Paul here with my first review post. I plan to update this post after a year of experience with it, so this is my “Initial Thoughts/Feelings” review. :) After a long while (5+ months) of investigating what Table Saw to purchase, I finally decided on the Grizzly G0715P. Now don’t get me wrong I read MANY of the reviews here and at other sites, and most all of them were not so stellar, but some were very good. I believe most of the badness had to ...

Read this review »


My New Grizzly G0715P Table Saw

My New Grizzly G0715P Table Saw

1350 days ago by moonls | 24 comments »

I received my saw 4 days after placing the order and am very pleased with this product! With the help of Ellen35, I assembled the mobile base and got the saw up and running with very few set-backs. The hardest part was getting the saw from the driveway down into my basement shop! The Shop Fox mobile base is very sturdy and makes moving it a breeze. The wings were installed without much effort and the table is dead flat. The only problem with installing the rails wasn’t noticed unt...

Read this review »


My Griz G0715P

My Griz G0715P

528 days ago by JamieInIndy | 22 comments »

Delivery: Took 5 days. I paid Grizzly the extra $34 for lift gate service which gets your saw off the back of the truck and onto the ground. At this point they are done. Grizzly said that I would have to call the freight company (UPS) to get a quote to get it inside the garage. UPS quoted me $199 to wheel it in, but encouraged me to chat with the driver first. In other words she was trying to tell me that the driver would probably just do it for me, and he did. Customer service was ve...

Read this review »


What do you get if you cross a Grizzly with a Polar Bear? Some sort of Hybrid???

What do you get if you cross a Grizzly with a Polar Bear? Some sort of Hybrid???

867 days ago by Rex B | 19 comments »

Background Info:Prior to owning this saw I made all of my cuts with a circular saw and a straightedge. Once I decided that I was interested enough in woodworking to dedicate half of my garage as a shop, it was time for a table saw. I did a lot of research and had pretty well decided on this saw. When I found out that I would be in Springfield, MO on Black Friday, I knew I had to check out the Grizzly showroom. While the Black Friday deals were pretty lousy, I ventured into the outlet store an...

Read this review »


Global warming won't stop these Polar Bears.

Global warming won't stop these Polar Bears.

1384 days ago by Szczuldo | 16 comments »

So I got this saw some weeks ago and it spent a week sitting assembled before I finally got the 220V circuit wired in the garage. I came from a cheap aluminium top table saw, the table was extremely small and fence extremely lacking. I may have had the blade miraculously adjusted to within 0.001” but that only helped my crosscuts. I even designed table extensions so that I can attach a real fence to it, but after many hours in solidworks I finally discovered that was not going to work well in...

Read this review »


1 2 next »
17 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase