LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Review of the Video "Sam Maloof: A Fine Woodworking DVD Profile"

Review of the Video "Sam Maloof: A Fine Woodworking DVD Profile"

01-20-2008 12:26 AM by Mark A. DeCou | 6 comments »

Wow, want to feel overwhelmed, and very inadequate? Sort of like being the last kid to get underarm hair in gym class. I am in the process of building three more Maloof-Inspired Rocking Chairs. Two for a commission, the third as a piece for speculation sale. I have been working through my notes from the last one and preparing wood, and I ran across the Sam Maloof DVD as a recommended Amazon item. You know, those annoying multi-week advertisments from Amazon that keeps track of ever...

Read this review »


Review of the Porter-Cable Orbital Sander Model 333

Review of the Porter-Cable Orbital Sander Model 333

01-19-2008 07:23 PM by Mark A. DeCou | 19 comments »

To be blunt, this will be my last Porter Cable Model 333. It is my third. The only one I like was bought in 1997, and I still use it. The one I bought in 2005 is dead. The one I bought in 2007 stinks. Now, don’t get me wrong. I “used” to love anything about a Porter Cable tool. My first warning sign was my laminate trim router I bought in 1997, and every P-C rep I talked to denied ever hearing about the problem with the collet getting crimped onto the bit sh...

Read this review »


Review of the Grizzly G1023SL Cabinet Style Table Saw

Review of the Grizzly G1023SL Cabinet Style Table Saw

01-19-2008 06:54 PM by Mark A. DeCou | 11 comments »

To put it bluntly, I love this Saw. Not, “Love” in the same sense as the way I feel for my wife, or my kids, or my dog, but this Saw is great. I was quite reluctant to buy it frankly. At the time, I had recently quit a job teaching woodworking where I was able to use a Powermatic Cabinet Saw that was about 20 years old, and I also loved that Saw. When I decided to buy my own Table Saw after leaving that job, I had to decide what to get. I didn’t have any money, an...

Read this review »


A REALLY nice Compound Miter Saw find.

A REALLY nice Compound Miter Saw find.

01-19-2008 06:40 PM by Coffinmaker | 4 comments »

I have always looked at Hitachi Tools when they first came out and starting reading all the reviews I could find on there new line of tools.I was REALLY impressed because after reading( the reviews..) on them I never once read anything bad about there products.I even posted questions on several Woodworkers forums.When the time came to replace my tired old Delta I chose an Hitachi 12 inch Compound Miter Saw,well also for the fact I got a great deal on it too..!!As always when buying a new too...

Read this review »


Review of the Bosch 4000 Portable Table Saw and Folding Stand

Review of the Bosch 4000 Portable Table Saw and Folding Stand

01-19-2008 06:23 PM by Mark A. DeCou | 21 comments »

NOTE: MY RATING OF 5 STARS is based on the operation of this saw for it’s intended use, being that it is a contractor’s portable table saw. I have gotten a lot of emails over the past 18 months or so since I first wrote this up, from folks hoping to build furniture without spending as much as a cabinet saw will cost them. I continue to feel that this saw is not recommended for high-end furniture making. You can get by with a handsaw if you have to, but if you buy this Portable ...

Read this review »


Hitachi Table Saw

Hitachi Table Saw

01-19-2008 06:12 PM by Obi | 74 comments »

On first look the Hitachi C10Fl looked like a great deal but after using it for 2 years the following has become evident: FOR EVERYONE WHO THINKS I PUT THE DUST COLLECTION ON FACING THE WRONG DIRECTION !!! NOTE THAT THE PORT IS OPPOSITE THE OPERATOR. THE PORT WAS INSTALLED ACCORDING TO THE INSTRUCTIONS. Rated according to the manufacturer at 3 hp found out that it is actually 1 1/2 HP a bold faced lie that they should be sued for. This is a terrible design, and although bigger and be...

Read this review »


Grex Pin Nailer Review P635

Grex Pin Nailer Review P635

01-19-2008 03:31 AM by StevePWL | 21 comments »

I purchased this gun in late Dec 07. I do a lot of trim on furniture and was sick of filling brad nail holes and not getting a good stain match. I had tried and returned a few other less expensive nailers so I wasn’t sure what to expect with the Grex. For the money ($199), I hoped it would be a good tool. After using it over the past few weeks, I am extremely pleased. I use the full 1 3/8” pin and they sink cleanly into the pine and poplar I generally use. The pin holes are very...

Read this review »


Woodworking Techniques

Woodworking Techniques

01-18-2008 05:10 AM by Mike Lingenfelter | 9 comments »

This is the latest DVD I’ve purchased by Christopher Schwarz. The DVD covers a way of working with your tools, either hand tools or power. In his demonstrations on the DVD he uses hand tools, but I talks about where power tools can or should be used. His approach of Course, Medium and Fine when it comes to: dimensioning lumber, cutting joints and shaping curves isn’t an earth shattering concept. Although I think most of us are guilty of skipping one of these steps at one ti...

Read this review »


Craftsman Professional series #315.218290 Tablesaw with folding stand.

Craftsman Professional series #315.218290 Tablesaw with folding stand.

01-17-2008 07:22 PM by Dadoo | 15 comments »

This is my personal review of my Craftsman saw listed above. I work out of a two car garage that I need to park two vehicles in, so I need a saw that is light and portable, and that leaves a small footprint when stored. About a year ago I literally burned up my old Rockwell tablesaw and went on the hunt for a new one. Brands like Bosch, Makita and Rigid weren’t readily available to see, touch and examine…and Sears had this one “on sale” for $350.00. There was a Dewalt ...

Read this review »


Dremel Scroll Saw: Sweet!

Dremel Scroll Saw: Sweet!

01-17-2008 03:18 PM by MsDebbieP | 18 comments »

(photo from www.dremel.com) When I decided to try my hand at working with wood, I thought that I would like to do some scroll work and so I did a little research and decided that I preferred the Dremel. About the time that I had made my decision, the tool came on sale and I jumped at the opportunity and it came home with me. The Features Sander :The station comes with the scroll saw and a sanding station on the side, which is really convenient, not only when I’m doing scroll sa...

Read this review »


« prev 1 ... 481 482 483 484 485 486 next »
4857 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com