LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Frustrating... Great customer service!

Frustrating... Great customer service!

03-05-2008 12:45 AM by Davedust | 9 comments »

OK, for starters Iā€™m not much of an internet guy, Id much rather be in the shop. That said I am so disappointed with this saw that it has driven me to this. So, after getting the saw home and starting to put it together I noticed a metal bur along the cast iron extension wings, where it joins with the main saw body. It was about 1/32 – 1/64 high the entire length of both extension wings. Not much of a big deal, was able to take care of it, but I started to think humm… After gettin...

Read this review »


Namazori Chisels

Namazori Chisels

03-04-2008 06:11 AM by Lee A. Jesberger | 18 comments »

I’ve been using these chisels, available in 5/8” and 3/4”, for about ten years I guess. I purchased them from Japan Woodworkers website. http://www.japanwoodworker.com These chisels are incredibly useful, but also somewhat dangerous to us western woodworkers. The way in which we tend to handle chisels leads to cut thumbs, as both sides are razor sharp. It took me a while to get used to that fact. They are designed to be used in carving back rounds smooth, or to clean...

Read this review »


Hitachi misses the mark with their  model C12LSH

Hitachi misses the mark with their model C12LSH

03-03-2008 10:20 PM by Bob #2 | 9 comments »

Last October 27/2007 I was induced to purchase the above mentioned CMS at a trade show .They Hitachi offered me a $100.00 rebate off the floor price to complete with Bosch and Dewalt who were, as I remember, breathing down their necks with pricing.It’s now March 3th 2008 and despite several e-mails and phone calls I am told to be patient another 2 weeks and they would give me my money back.The last time they said that it took three weeks before I eventually called again. Had they not...

Read this review »


Great value in the ongoing Dust Wars saga...

Great value in the ongoing Dust Wars saga...

03-03-2008 07:43 PM by Greg3G | 14 comments »

I purchased this at the Baltimore Woodworking Show recently. I was in the market for one (cough, cough, wheeze ? ) and was looking at both the Delta and the Steel City. They had received the best reviews so I thought I would look at them first hand. The found that the both machines were fairly comparable in statics but the Steel City came at a better price; I picked it up for $320 including tax which was about $40 less than the Delta. I do like the 1 micron bag that comes standard. I also ...

Read this review »


Craft Suppies friction polish

Craft Suppies friction polish

03-03-2008 04:22 AM by Sawdust2 | 4 comments »

When The Wood Show was in Atlanta Craft Supplies was teaching folks how to turn pens. I think that is where TimD made his first pen.I had been using CA and BLO as my preferred finishing method for bottle stoppers and pens. But that usually meant sanding to at least 4800 grit, three or four coats of CA and BLO and even then the next day the finish might have dulled down.Thought I’d give Craft Supplies Friction Polish a try.Just sanded to 2400 with mm then friction polish with a paper tow...

Read this review »


Five Stars for 5 basic tools

Five Stars for 5 basic tools

03-02-2008 10:20 PM by Shopsmithtom | 23 comments »

The year was 1947. Hans Goldschmidt thought that post war America could use a quality combination woodworking tool. Most do-it-yourself folks at the time didn’t have the luxury of having a large basement or spare building to devote to a workshop. He was right. It became the largest selling power tool of its time. The ads talked of having 5 power tools in one, with accessories for at least a half dozen more. In 1952, my dad was listening. This is a long overdue review of that ve...

Read this review »


I BADMOUTHED THE WRONG COMPRESSOR

I BADMOUTHED THE WRONG COMPRESSOR

03-02-2008 03:43 PM by jockmike2 | 22 comments »

A while back I gave a negative review to this 2-in-1 brad / stapler with compressor, here on Lumberjocks. I was recently contacted by the “Director of Product Developement at Stanely Bostich.” I Quote, ” Your post regarding your frustrating experience with our compressor just came across my desk. First, I would like to apologize for the inconvience and frustration this problem caused you. For a short period of time, the valve plate was out of our specification which could le...

Read this review »


Rikon Drill Press and Orion Mortising Attachment

Rikon Drill Press and Orion Mortising Attachment

03-02-2008 02:20 AM by shaun | 11 comments »

I went to the March Madness sale at Woodcraft today and came home with a new benchtop drill press and I grabbed up an Orion mortising attachment while I was there. I caught the eary bird part of the sale so I got an additional 5% off. The drill press retails at Woodcraft for $249.99. For the eary bird deal they take the additional 5% off after they apply the 10% discount so it ended up costing me about $214 before sales tax. It’s a 13” drill press with a 1/2 hp motor. Prett...

Read this review »


Rockler Power Air Respirator

Rockler Power Air Respirator

03-02-2008 12:06 AM by Dick, & Barb Cain | 36 comments »

I wanted a respirator that I could wear all by itself. I didn’t want to contend with any head gear. I have used regular dust masks over the years, but after wearing them for awhile, it takes a lot more effort to breath.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~After seeing this one in Rockler I ordered one.It’s surprising how that little built in fan helps in your breathing, & it keeps your face cool. The fan is very quiet, & it runs on 4 AA batte...

Read this review »


Sharpen your mortise chisels

Sharpen your mortise chisels

03-01-2008 09:11 PM by Karson | 15 comments »

Rockler and others have this tool to sharpen your mortise chisels. Trust me they don’t come sharpl Lee Vally has just the sharpening cones for $7.95 a better buy than Rockler. It’s a cone with diamond sharpening grits on the edge. The picture doesn’t show but it does come with 2 grit sizes, course and fine. I placed the diamond cone in my drill press and lightly brought it into the inside of the mortise chisel Ligntly do that until you get all edges of the chisel sharp...

Read this review »


« prev 1 ... 369 370 371 372 373 374 375 ... 397 next »
3962 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase