LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Drive Belt Dampens Vibrations

Drive Belt Dampens Vibrations

2330 days ago by jockmike2 | 20 comments »

I’ve used this belt on a couple different machines and it does dampen vibration by at least 50%, if not more. It’s really unusual too. It is so simple to take links out or add links to make it longer or shorter, it’s a breeze. It also lasts forever. I’d say it lasts longer than a regular v-belt. I’ve used it on an old lathe and it settled a bouncing lathe down. Also an old table saw I had was vibrating pretty bad and I had done everything I knew to straighten it ...

Read this review »


DeWalt DW735 Heavy-Duty 13" Three Knife, Two Speed Thickness Planer

DeWalt DW735 Heavy-Duty 13" Three Knife, Two Speed Thickness Planer

2333 days ago by tooldad | 44 comments »

I have had the opportunity to use about 4 different planers. I owned a Ryobi 12.5” for about a year and returned it because rollers wouldn’t work, They bought a Ridgid and it lasted about 3 months, same problem (Ryobi, Ridgid, and Milwaukee are same corp) Finally I bucked up and bought Dewalt after seeing this at the wood show. However I am not the average weekend woodworker being a shop teacher so minimum duty tools just dont’ cut it for me. I also had a Delta 12.5”...

Read this review »


My first planer... cheap, easy to use, and portable

My first planer... cheap, easy to use, and portable

2333 days ago by Shopsmithtom | 14 comments »

Well, for anyone who expects an in-depth review that has it’s foundation in a thorough understanding of wood planers, you’re going to be disappointed. This is my first planer and I’ve only actually been near an operating one once before, so all you’re going to get is a novice’s impression of a machine that’s probably meant for a novice. Maybe that makes me the perfect guy for the job, after all. This model sells locally for $239.00 and (of course) lis...

Read this review »


I would like a review of the Timesaver Speedsander

I would like a review of the Timesaver Speedsander

2335 days ago by tooldad | 7 comments »

I am putting together a proposal for my school shop to get a wide belt sander for the upcoming school year. Had my eye on a grizzly, however prefer local reps and us made Timesaver. Looking at the Speedsander series for about $9k, the grizzly about $10k, or the timesaver 1300 series – $14K+4K setup. I obviously want the Timesaver 1300, but at half the cost I can get the speedsander if all goes well with approvals. I would like any reviews I can get on any of the 3 listed. Thank...

Read this review »


Spiral cutters worth the cost!

Spiral cutters worth the cost!

2335 days ago by tooldad | 12 comments »

I was recently able to obtain a 5hp Grizzly 1033X 20” Planer for my school shop. Our old 20” planer has been around for 10 years and has seen better days. I convinced admin that this was the way to go and the extra cost would be worth it to cut on noise levels. I have always heard of this but have never experienced it until just a month ago. Boy were they right! We now have 2 planers in the shop. The spiral cutter is quieter standing next to the machine than standing in the ...

Read this review »


Pusher System

Pusher System

2335 days ago by CharlieD | 25 comments »

Recently I played a three way game of catch with my table saw and a small piece of maple plywood. As a result I attempted to catch a 250 MPH plywood line drive with my right thigh. After ensuring my right leg was still attached to the rest of body I decided I needed a little more safety and purchased the GRR-RipperĀ® precision pusher system. It’s purpose is to serve as a virtual movable blade guard that you hold, rather than a blade guard that is affixed to the back of the table saw...

Read this review »


finally found something to carve out the bowl of a spoon

finally found something to carve out the bowl of a spoon

2336 days ago by Joey | 7 comments »

Ever since I started making spoons and spatulas back at christmas, I have been looking for a tool that makes carving the bowl of a spoon easier. I started out using a dremel. The problem with the dremel’s is that you can’t find carving heads big enough. All of the power grinders I had found were $300+. But Woodcraft has a new tool made by Wecheer. It is simply to use, and has more than enough power using carving bits with 1/4” shanks. The first time i used it, I cut th...

Read this review »


Big bang for little buck

Big bang for little buck

2337 days ago by Jamie | 9 comments »

Just to start, my oldest daughter Karen was cleaning polish off of her nails at the dining room table when she accidentally tipped over the bottle of nail polish remover. It proceeded to run across the table top and eat through the finish… I decided to strip down the top of the table and refinish it, but I knew that my random orbital sander was on it’s last leg so in a way… this gave me good justification for a new shop tool! Now for the review… I was originally...

Read this review »


Shopsmith Joint Matic - Horizonal Router

Shopsmith Joint Matic - Horizonal Router

2338 days ago by Dan'um Style | 27 comments »

First I must say that the photos are not mine. I surfed the net and found them. This review is for a discontinued tool. Can’t buy it new anymore, but if you find one, grab it. It is a rare tool. Shopsmith originally sold for $999. There is currently one for sale on craigslist.org in Dallas for $600 I bought mine on eBay a few years ago. It came with a Porter Cable router base that fits my 690.Even came with the optional Shopsmith stand. I got one heck of a bargain. Paid twice a...

Read this review »


My First New Tool For New Shop - What is it?

My First New Tool For New Shop - What is it?

2340 days ago by ND2ELK | 31 comments »

I bought a solid oak cabinet at the prison industries auction 2 years ago. I brought it home and hung it in the garage. I am starting to clean out the garage where my new shop is going to go. I was taking the screws out of a brace on the bottom of the cabinet. While holding on to a 2 X 4 fastened on the side of the cabinet, it felt like it moved. I got to looking and this is what I found. It is a Prison Shank!!!!! You figure out what it could layout.

Read this review »


« prev 1 ... 349 350 351 352 353 354 355 ... 382 next »
3815 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase