LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
More bowls less shavings

More bowls less shavings

2058 days ago by jeffthewoodwacker | 4 comments »

I was given the opportunity to test out the Steussy 6” bowl saw and I was impressed. I have used several different coring systems to get multiple bowls from one blank but always felt that the cost of most of these would keep most turners from purchasing. Dick Steussy has created an inexpensive tool that gives even novice turners the opportunity to get two or three bowls out of one blank.The bowl saw has a good handle to hold what looks like sawsall blade on steroids. You mount your b...

Read this review »


Grizzly G0513X2 17" Bandsaw 2HP w/Cast Iron Trunnion

Grizzly G0513X2 17" Bandsaw 2HP w/Cast Iron Trunnion

2058 days ago by Padre | 20 comments »

Just received this on Monday. It came via UPS Freight, and I paid $39 extra for the lift gate service. I highly recommend this service since this saw is a beast! 1. It came in one of flimsiest ‘crates’, if you can call it that, that I have ever seen. This saw weighs in at 325 pounds, more like 425 pounds, and this crate was built for maybe 200 pounds max. 2. The email instructions tell you to inspect the crate for damage before signing. I did this, saw nothing, and sig...

Read this review »


SawStop 10-Inch Contractors Saw with 50" rails and 30" outfeed table Assembly

SawStop 10-Inch Contractors Saw with 50" rails and 30" outfeed table Assembly

2058 days ago by Padre | 11 comments »

My saw arrived last week and my sons had to go pick it up at WoodCraft for me since I had shoulder surgery last Tuesday. Well, I felt good enough yesterday to start assembling my new SawStop Contractors table saw. The first thing I noticed is that it was boxed, packed and labeled very clearly. Each box had what was inside clearly printed on the outside so there was no guessing, no “eenie-meenie-miney-mo” type activity. I ordered:10” contractor sawmobile basecast iron...

Read this review »


Fine woodworking Archive 1975-2008

Fine woodworking Archive 1975-2008

2058 days ago by a1Jim | 5 comments »

Hey Gang I have subscribed to up to 12 different Magazines at one time and My favorite has been Finewoodworking.I know each woodworker has there own favorite . The truth of the matter is I have complete collections of Fine woodworking , Fine Home building , Wood , Woodsmith, and woodshop News plus a couple hundred books. If you think that takes up a lot of room your right. When they announced the were coming out with a complete collection of Fine Woodworking on DVD I was sceptical about ho...

Read this review »


4 star blade for a 3 star price

4 star blade for a 3 star price

2060 days ago by marcb | 1 comment »

I purchased this blade for a few dollars more than a standard cheapish Oldham. For this price it is an unbelievable value. The blade is quite and does both rips and crosscuts with very good results. I gave this blade 4 stars compairing it to other blades in other price ranges. I feel that this is fair because a $10 blade usually gives you 1 star worth of performance and the only recommendation is to upgrade to a more expensive blade. Compared to the Oldham blade this is a no brainer,...

Read this review »


Worth Every Penny

Worth Every Penny

2060 days ago by Tomcat1066 | 4 comments »

I gotta have my music. In fact, for some reason I concentrate better when I have music going than when I don’t. However, with the scream of power tools, it can get lost. Not only that, but something has to help pass the time when sanding! Well, the Work Tune does the job just fine. I picked this one up for $50 from Lowe’s with some Christmas money, and I’m thrilled with it. First the hearing protection: It works great. I can hear the scream of the machines, but n...

Read this review »


More Than Worth the Money

More Than Worth the Money

2060 days ago by Tomcat1066 | 10 comments »

While wandering through Lowe’s, I saw this bad boy just sitting there with a $30 price tag. Since I found myself in no position to own a table saw for the foreseeable future, it looked like it would solve one of my biggest problems: how to rip boards down. The Accu-Rip attaches to your circular saw with two small screws located at the front of the guide. It takes a bit of time to get it set right, because it’s edge must line up with the blade just so, but once it does, it wo...

Read this review »


Toastiest shop ever

Toastiest shop ever

2060 days ago by motthunter | 7 comments »

I had debated for a long time to find the best solution to heat my garage shop at home. Forced air is no good since the filters will be clogged with dust all of the time, and a heater that burns the shop air has too many drawbacks including humidity control, possible fires, and consumption of oxygen in the room. I decided that whatever heater I get had to use outside air and vent outside. My choice was this radiant tube heater from SRP. I have it hung and in the photo was still testin...

Read this review »


The Steussy 6" BowlSaw

The Steussy 6" BowlSaw

2063 days ago by lew | 5 comments »

This is my first tool review at LumberJocks. I received this as a Christmas gift and couldn’t wait to try it out! The saw worked exactly as advertised. I have the 6” model and was able to create a daughter bowl blank that was 4” in diameter and just shy of 2” deep. (The 4” diameter is a little over the limit of this model- see next paragraph). The wood I was using was hard Maple. The most difficult part of the entire process was creating the “slot” in the “parent” bowl to al...

Read this review »


Always something.

Always something.

2063 days ago by Routerisstillmyname | 9 comments »

Well, it is dead on 100% accurate measured against my super square inside and out. I would give it 5 stars but falls way short in the locking department. Good for saw blades, magnet all around, (like it’s little square brother) and nice thick blades. good visible LCD, stable reading and location(not covered by blade). But have to be very careful when using it for what it was designed for that is measuring wall angles due to incredibly lousy locking mechanism.Get one if it’s on super sale.

Read this review »


« prev 1 ... 325 326 327 328 329 330 331 ... 381 next »
3810 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase