LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Wow what a saw!

Wow what a saw!

02-09-2010 12:29 AM by Bert304 | 31 comments »

This was my first purchase from Grizzly Industrial. So far I have no complaints. I ordered the bandsaw on Friday and picked it up at the terminal this morning. The box only had to small damages to the cardboard, only on the outer layer of cardboard. I opened the box and everything was packed very nicely and tightly in styrofoam. I had to tilt the box on its edge to get the bandsaw out, I could not lift it out. I unpacked everything and inspected all the parts and the bolts and nuts. Al...

Read this review »


Tried a bunch of "multi tools" before buying the sonicrafter

Tried a bunch of "multi tools" before buying the sonicrafter

02-08-2010 11:30 PM by Wade | 20 comments »

Overall this tool is a must have. The product performs all the functions that the infomercial claims and is extremely heavy duty. There a few flaws that the designers of this tool did not take into consideration with heavy use. Problem 1. The hex head bolt that is used to hold on the blades/cutters/sanders/etc… came loose a few times causing the attachment to bounce around. Second thing with the bolt was that after repeated changes of the attachments the hex head bolt and hex head wr...

Read this review »


Reliable, versatile trim router kit

Reliable, versatile trim router kit

02-08-2010 03:27 AM by SchotterWoodworking | 6 comments »

I’ve been using this model of trim router in a commercial cabinet shop which produces over 50 finished cabinets a week, dozens of plastic laminate countertops, and massive reception desks. These are the only trim routers we have in the shop and they get abused all week long. Several of them have been in service over 4 years without any major repairs (brush replacements and a fan here and there). I bought this kit off Ebay used for my home shop. The underscribe base is great for people w...

Read this review »


Affordable powerful hammer drill

Affordable powerful hammer drill

02-08-2010 03:14 AM by SchotterWoodworking | 4 comments »

This is my first review for this website so forgive me if I don’t quite come up to par (any constructive advice would be appreciated). This was my first hammer drill purchase. I’ve used a Bosch Bulldog and a Milwaukee hammer drill, which are both very impressive tools, but a little too much for me. I didn’t buy this drill for drilling block walls all day long. This is a great hammer drill to keep for DIY home improvement. I put a wire wheel in the chuck and stripped paint o...

Read this review »


agreed!

agreed!

02-07-2010 10:04 PM by bzzzzzt | 4 comments »

I just found this post, curious about the General 90-200 M1 15” saw I read about in Feb. 2010 Woodshop News article about band saws. I’ve owned a 490 since 1985. I bought it knowing I’d need a sturdier, less aggravating tool than my inherited Sears band saw. From day 1 it has been the primary stationary power tool in my shop. I don’t own a table saw, I use the band saw for all cutting. Safer. I’ve been in business as a one-man shop for almost 30 years. I do some ...

Read this review »


an article and my review on the forbes top 10 most dangerous tools

an article and my review on the forbes top 10 most dangerous tools

02-07-2010 09:57 AM by BOB67CAM | 30 comments »

The Ten Most Dangerous Power Tools Forbes magazine recently published a list of some of the most dangerous power tools on the market. While we definitely are power tool advocates, we also want to promote safety on our site. These tools are not toys, and users must understand the potential harm they can do if not used properly! do not aim at what you do not plan to kill POWER NAILERS: They make short work of framing, but power nailers also send 37,000 people a year to emergency rooms acc...

Read this review »


Dust Deputy for Router Table

Dust Deputy for Router Table

02-07-2010 04:03 AM by dhg | 9 comments »

Routing my test piece for raised panel doors with the Dust Deputy connected to the router cabinet and fence, I was sold on this dust collector. I’d give it more stars if I could. I had gone to Onieda’s website for more information and saw how the dust swirled around, when I saw it on mine I just started laughing thinking this thing is going to work. After routing 9 raised panels and emptying the canister once, total of about 6-7 gallons of sawdustl, it was time to look into the s...

Read this review »


Hitachi Cordless Drill

Hitachi Cordless Drill

02-06-2010 07:01 PM by Kjuly | 22 comments »

My old Delta cordless drill, drilled it’s last hole after four plus years of service. It was a 14 volt drill that served me well. The drill is in decent shape but the batteries would not hold a charge long enough to drive a 2? drywall screw. To replace the two batteries would cost over $75.00. I do not want to put that kind of money in to batteries with the life of the drill motor uncertain. Time to go shopping for a new cordless drill. First, lets look at what I need in a drill and ho...

Read this review »


Great features, Horrible Alignment Issues

Great features, Horrible Alignment Issues

02-06-2010 06:46 PM by bobthebuilderinmichigan | 36 comments »

I was very impressed with the Craftsman 21833 Contractors Table Saw when I saw it in the store. It had many features found on more expensive models – i.e. the motor is 1 3/4 hp and is fully enclosed and quiet with good dust collection. However, all of that becomes worthless if you can’t align the blade to the miter slots. Mine came 1/8” out of alignment! Turns out, the trunion bolt holes aren’t drilled precisely because despite loosening them and knocking the truni...

Read this review »


Bostitch CPACK270 / CAP1516

Bostitch CPACK270 / CAP1516

02-05-2010 01:34 AM by TheDane | 5 comments »

I bought the Bostitch CPACK270 ‘kit’ in June of 2007, and have found it to a great addition to my shop. It gets used a lot. The ‘kit’ included:—CAP1516 1.5HP (Peak) oil-free contractor compressor—SB-1664FN 16-gauge, 2-1/2in. finish nailer—SB-2IN1 combination brad nailer/finish stapler—3/8in. x 25ft. heavy duty airline with MPT fittings—Tire inflator chuck—Thread sealant tape The CAP1516 is a light-weight compressor (19-1/2 lb.)...

Read this review »


« prev 1 ... 324 325 326 327 328 329 330 ... 444 next »
4440 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com