LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Rite in the Rain Note Pad

Rite in the Rain Note Pad

02-25-2011 04:18 AM by christopheralan | 3 comments »

A notepad? This isn’t just any note pad. This is the All-Weather Notebook from Rite in the Rain. If you are not familiar with Rite in the Rain products, prepare to be amazed. This is the ultimate in weather-proof writing and note taking. Does it work while damp? Yes. Does it work while wet? Yes. Does it work underwater…? Yes. This paper will work in the desert, the cold, the tropical, and yes, in your shop and job site. They have large selection of paper, notebooks and page pa...

Read this review »


Diamond sharpening Kit

Diamond sharpening Kit

02-24-2011 04:35 PM by dbray45 | 6 comments »

This kit came with 4 “stones” – actually 4 steel plates. The extra course is a little smoother than road surface. When I used this to flatten my 8000 grit water stone, I found that my flattening stone has been worn to a point that is no longer flat. When you get these, sharpen a piece of steel or something hard where you are not looking for that pristine mirror finish. I made a blade for a radius plane – thank Mads for this, the blade is now done – and went...

Read this review »


Plumb It exendable level

Plumb It exendable level

02-23-2011 12:02 PM by devann | 2 comments »

This is a review about a level I’ve been using for the last 15 years or so. The manufacture, called PlumbIt makes several models of aluminum levels that are capable of extending from about four feet to nearly twenty two feet in lentgh. The model I have, closed measures 63” and will extend to 13’ 10”. These are some pretty unique levels because the length of the level can be set anywhere within their operating range with just a sqeeze of the handle. This makes this a l...

Read this review »


Hitachi M12V Falls Short

Hitachi M12V Falls Short

02-23-2011 09:56 AM by pintodeluxe | 17 comments »

I was excited to add this router to my collection because of its 15 amp power rating. However, several factors led me to use other machines. Ergonomics: The machine is heavy and clunky, with no particular thought to ergonomics. A router is one tool in particular that needs to feel good in your hands. The plunge action is fair. The plastic handles are hollow, and feel like they may break off at any moment. They actually creak as you pick this tool up. The height adjustment knob is a ch...

Read this review »


Timberking 1220 manual sawmill

Timberking 1220 manual sawmill

02-22-2011 07:43 PM by HalDougherty | 13 comments »

Timberking has been selling sawmills for a long time and I’ve wanted my own for almost that long. It took a while to get everything together to purchase one. I went with a manual mill instead of a more expensive hydraulic model, first because of the extra expense for the more complicated sawmill. Second, I wanted to saw lumber to be used in my own products and to justify more expense, I would have had to be in a full time sawmill business. With this little mill, I can carve gunstocks...

Read this review »


Traditional Woodworker chisels

Traditional Woodworker chisels

02-22-2011 06:05 PM by dbray45 | 7 comments »

I purchased 6 chisels of this set. I was looking for a set of chisels that were in inches and not metric conversion like most of the chisels out there. My current set of Marples/Irwin/blue handled chisels have been good to me but are not real hard and keeping them sharp has been an issue. So, I bought the 1/8, 3/16, 1/4, 3/8, 1/2, and 5/8” chisels since these were the sizes that I will use the most. The way they are labeled is also nice and readable. These chisels, like all the r...

Read this review »


Used Jet JJ-6CS jointer, seems to be a bargain

Used Jet JJ-6CS jointer, seems to be a bargain

02-22-2011 05:17 AM by ic3ss | 11 comments »

I picked this up from a Craigslist ad recently for $200. SCORE!! I wanted the CSX with 1 hp motor, but this one will do. And with this being about half the going price for a newer CSX, I can put that money towards some chisels or a shoulder plane. Looks like it’s seen some action, I had to clean a bunch of surface rust from the fence and tables. A thorough cleaning did wonders, and now I need to pull the knives and get them sharpened. Everything seems to work fine, even the bearings are...

Read this review »


Great little stand for my Bandsaw Station

Great little stand for my Bandsaw Station

02-22-2011 03:16 AM by patcollins | 3 comments »

I wanted a support for my benchtop bandsaw and have been mulling the idea of making one until I came across this. For $28 it was a great deal from Harbor Freight. It is adjustable height but is a bit short for me for most things (Im 6’4”), b ut for my bandsaw I thought it would be perfect. It came with middle and bottom shelving material that was very flimsy hardboard, I’m talking so thin the box was stronger. I made new shelves out of some 3/4” particle board. ...

Read this review »


A real help

A real help

02-21-2011 05:07 AM by ChunkyC | 17 comments »

I purchsed the I-Socket from Rockler for $29.99 + Free shipping. The instructions and web site say that it’s for a vacuums and dust collectors. I personally wouldn’t use it on my 2 HP Dust Collector. It just doesn’t look like it’s made well enough to handle that much inrush current. I purchased the I-Socket for one thing, using with my compound sliding miter saw. It works just as advertised. When you squeeze the trigger on the miter saw, the vac starts right ...

Read this review »


PSI Sharpening System

PSI Sharpening System

02-21-2011 03:49 AM by Moby | 2 comments »

I just recently received this sharpening system to put an edge on my dull turning tools. It does a good job but it could be better. Since the system is 8” in diameter sometimes the lathe bed can get in the way of sharpening the tools, a 9” or 10” version could give it some more room. Other than that it is a great system and you can’t beat it for around $40.

Read this review »


« prev 1 ... 302 303 304 305 306 307 308 ... 489 next »
4889 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com