LumberJocks

Reviews: Tablesaws

  • Advertise with us
My table saw could not have broken at a worse time, or a better time.

My table saw could not have broken at a worse time, or a better time.

02-29-2008 10:48 PM by Tom Adamski | 19 comments »

Last August, I was starting a new project; an oak fireplace mantel for a friend. I guess my 10+ year old Delta (cheap inboard motor model) could not take the strain and let out what souded like a high pitched scream and stopped with a puff of white smoke. After a few explatives and a sudden realization that my project was on hold, I went inside and started looking online for a new saw. I read so many reviews, my head started to spin, but I knew I wanted another Delta. If it is good enough for...

Read this review »


Outstanding Saw for the Home Shop

Outstanding Saw for the Home Shop

02-29-2008 06:46 PM by Chris | 4 comments »

I have owned this saw for approx. two years now. In reality I would rate it at about 4.5 stars only due to a minor annoyance. I had been using a bench top Delta given to me by my father in-law for a few years and had become VERY frustrated with this kind of saw. In my search for a contractor style saw it came down to either the Powermatic or the General; I am glad I chose the General. It was accurate right out of the box; I used a Master Plate / Master Guage setup to check the blade and ...

Read this review »


My new tablesaw

My new tablesaw

02-29-2008 12:57 PM by ripper | 10 comments »

My wife got me this tablesaw,my old one was on it’s last leg it was a ryobi 10 in.As you can see it full extension to 50 in. on the sides, has a rear outfeed table extension that go’s out 22 in.

Read this review »


Ridgid TS3650 Table Saw

Ridgid TS3650 Table Saw

02-28-2008 09:15 PM by John Gray | 53 comments »

I’ve had this saw for about a year and love it. It was pretty square out of the box and the fence is really steady in contrast with earlier reviews on older models. The ability to move it on wheels is great, it comes with the wheels attached a bonus. There is a 2 1/2” dust collector hook up up under the saw which is so so, it’s hard to control the saw dust on any contractor’s saw. I have had no troubles with it and would highly recommend it.

Read this review »


Good luck finding one

Good luck finding one

01-31-2008 11:49 PM by CutNRun | 11 comments »

I saw the review of a refurbished jointer and wanted to post a review on a unique table saw. The Hammond Glider saws were originally designed to cut lead type for printing presses. They are a very precise, sliding table saw with accessories designed to easily and accurately position very small pieces for cutting. I purchased mine for $50.00 on Craigs List and this included a very strong 1 HP motor. When I picked up the saw, the table was a solid sheet of rust. However, the table still sl...

Read this review »


Video Review: SawStop me if you've heard this one before....

Video Review: SawStop me if you've heard this one before....

01-29-2008 08:40 AM by gizmodyne | 34 comments »

IntroThe saw is a 3hp, 635 pound behemoth. It is heavier than sin. Steel, Black, and Red are a good look for a saw. Very, very, very, expensive. Over $4000 with all accessories (fence, mobile base, dado cartridge, extra break cartridge, taxes). I know ….. that is really expensive. (And… I’m over it.) Why this saw: I have been taking woodworking classes for the last four years and have grown accustomed to working on the Unisaws and Powermatic cabinet saws. At home I was using a ...

Read this review »


Excellent Saw, Great Power, Good Price

Excellent Saw, Great Power, Good Price

01-29-2008 04:30 AM by wildbill903 | 9 comments »

I purchased the 10” Hybrid saw in December last year, so it has been in the shop fewer than two months. But in these two months we have grown quite close. My wife named her “Biesy Baby” after the fence.I’ll touch on a few of the more important points in my review of the saw, and hopefully add some insight into your shopping experience. Features: The saw came, as the name states, with the left tilt feature. Two noted luxuries this affords are in large mitred-edge ...

Read this review »


Not the worst, but...

Not the worst, but...

01-28-2008 10:51 AM by Rob McCune | 6 comments »

Okay, I realized when I spent $99 on a table saw that I would be getting what I payed for, but I was just starting out and really needed something. I picked up a decent blade for it and hoped for the best. Power: none. It can barely cut a 2” x 4” through the “2” side, don’t even bet on the “4” side. Reliability: Well it hasn’t broken on me yet, but I lost the arbor wrench and without it I can’t change the blade. If you get one, do...

Read this review »


A GREAT SAW

A GREAT SAW

01-27-2008 09:45 PM by bfd | 11 comments »

In my opinion you can’t buy a better saw for the money when it comes to quality. I disagree with the other post on one point calling this a great saw for a beginner. I think it is a great saw period! I don’t concider myself a beginner nor do I concider myself a pro by any means but somewhere in the middle like most. With that said I don’t think this saw will be a purchase that I will regret or out grow any time soon. I opted for the 30” Beisemeyer Fence and have upgr...

Read this review »


Fantastic 110v Tablesaw

Fantastic 110v Tablesaw

01-25-2008 06:15 PM by HybridIndie | 12 comments »

I’ve had this saw for just over a year now and love it. The saw has plenty of power and is very accurate. Repeatable cuts are a breeze as long as you don’t need more that 25” of capacity. This being my only complaint about it. The saw itself is smooth with no noticeable vibration even with my 8” stacked Dado installed. I have ripped long pieces of Red Oak strips for face frames using this with a pretty generous feed rate and no noticeable bogging down in the motor. I ...

Read this review »


« prev 1 ... 20 21 22 23 24 next »
240 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase