LumberJocks

Reviews: Tablesaws

  • Advertise with us
Grizzly G1023SL TS Overall First Impression

Grizzly G1023SL TS Overall First Impression

09-14-2009 06:34 AM by Kevin | 29 comments »

I received my new TS this past Thursday. The freight guy was kind enough to go ahead and put it in my garage for me :) That was excellent I thought and was not expecting that at all. This review will just be a first impression on how it was shipped and how easy/difficult it was to assemble the machine. 01. SHIPPING – 5/5 The shipping was great. No holes or damage at all on any of the boxes. It came with two boxes. One for the fence and other for machine. The cabinet came o...

Read this review »


Ridgid 4511 Granite Table Saw:  Really good saw at a great price.

Ridgid 4511 Granite Table Saw: Really good saw at a great price.

09-10-2009 09:54 PM by mandmj | 29 comments »

I thought I’d post a review of my Ridgid 4511 Granite table saw for those who are interested. I purchased this in the spring w/ the ultimate power deal (or whatever they call it) for about $450. I’ve used it for several small projects now and have been pleased w/ the saw, but like most things in life, it wasn’t perfect. Pros:Granite top is uberflat. And hard. And rust free. Nice fence, easy to adjust and accurate, also easy to add faces (UHMW, etc) Herculift base is really amazin...

Read this review »


Great 115 Volt Saw

Great 115 Volt Saw

09-01-2009 04:11 AM by Ben | 11 comments »

I finally received my supersaw after two months on backorder. It was worth the wait. Jet ran a Fathers day deal in June and I got it cheap. Assembly I spent the better part of a Saturday putting the whole machine together. Everything was packaged well and there was no damage. I would rate the manual a 7 out of 10. I did spend 20 minutes looking for one package of bolts that they had packed inside one of the fence rails with the cap on it. I finally read the manual very closely to ...

Read this review »


Skil 10 in 15 amp tablesaw

Skil 10 in 15 amp tablesaw

08-29-2009 01:49 AM by kosta | 20 comments »

Yo whats up everybody on Wednesday of this week I got my skil tablesaw and I just wanted to give a quick review of it. Now the tablesaw setup will be episodes 40,41,42. In episode 42 I give a quick review of the saw after I make my first cut. Now I have used powermatic, delta/rockwell, jet,and dewalt tablesaws before and this one stood out. For the price I recommend this saw to anyone. The only problem I saw with it was that it didnt have extension wings and I was kinda pissed that it didn...

Read this review »


Grizzly G1023SL 10" Table Saw 3 HP Single-Phase 220V Left-Tilt

Grizzly G1023SL 10" Table Saw 3 HP Single-Phase 220V Left-Tilt

07-31-2009 07:23 PM by Jon3 | 10 comments »

Disclaimer I’m an amatuer woodworker with about 3 years of experience. I am not a professional, and I’m not paid to do this kind of work. Also, my entire shop measures roughly 11’ x 22’, and includes some storage as well, so I may be more cautious about sizing and portability compared to your average woodworker. IntroductionI originally purchased this saw in June of 2007, and as this is July 2009, I’ve got 2 full solid years of use of it it so far, and it is...

Read this review »


Grizzly G0691 Table Saw

Grizzly G0691 Table Saw

07-24-2009 04:38 PM by stitchop | 30 comments »

I have assembled my new G0691 Grizzly table saw, and made a few cuts, and will post my first impressions.I purchased this saw as soon as Grizzly put free shipping on it. This saw is replacing a 11 year old Craftsman contractor saw, and I expect it to be the last table saw I ever buy. .... Unpacking and assembly of the saw was a simple matter of following simple instuctions. All the parts were present and easily identified. The assembly starts with removing a brace from the tunnions. This ...

Read this review »


Mastercraft Hawkeye laser review

Mastercraft Hawkeye laser review

07-22-2009 03:49 AM by BeachedBones | 9 comments »

I was noticing that there were no Mastercraft saws reviewed, so I though I’d jot one down for those Canuks out there. Mastercraft is a store brand of Canadian Tire if you don’t know. I bought this saw because I’m working on a flooring install away from home, I was using a small old Craftsman saw that I’ve had for 14 or so years. The old Craftsman cooked it’s bearings and toasted the motor. Anyways, I needed a portable saw to replace that one and finish the job...

Read this review »


Grizzly G0690 Table Saw with riving knife

Grizzly G0690 Table Saw with riving knife

07-08-2009 08:50 PM by LHFLORIDA | 9 comments »

Received the saw about 2 weeks ago. Arrived in perfect condition. Picked it up from freight office using a flat bed trailer—-recommend using trailer and not truck. Four of us moved it to it’s mobile base ( I used the Delta mobile base and would recommend it for this saw). Table is well finished and flat. Assembly was simple and no “duh” moments. Saw has plenty of power and runs smooth with little or no vibration. I am sure it was just the luck of the draw, but my sa...

Read this review »


What Delta says they are trying to improve, and will get it right.

What Delta says they are trying to improve, and will get it right.

07-01-2009 07:55 AM by Taigert | 26 comments »

Update Delta finally made contact with me!!!!!!! I was suprised when I answered the phone and the caller said he was from Delta, seen as it was in the evening outside of normal business hours. He agreed that they have been having some problems, but they are trying to get everything ironed out.He agreed that evrything shoild have been there as one shipment. I didn’t mean for it to sound like I figured the mobile base is part of the saw package. It was added as a option, my point is n...

Read this review »


Ridgid R4511 10 in. Granite Top Table Saw

Ridgid R4511 10 in. Granite Top Table Saw

06-23-2009 06:02 PM by PurpLev | 160 comments »

To be fair , I was waiting to write this review after I tackled the last (and only) issue I’ve had with this saw as to give a proper review of it’s operation, and not limited by any aspect of missing/malfunctioning parts out-of-the-box. my ‘limitation’ was that the fence had a slight disposition issue once locked all the way down (was fine if locked half way – it would stay put and stay on the mark – but if the lock handle was pushed further, it would skew ...

Read this review »


« prev 1 ... 17 18 19 20 21 22 23 ... 26 next »
256 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com