LumberJocks

Reviews: Tablesaws

  • Advertise with us
Grizzly G0771Z Hybrid Saw

Grizzly G0771Z Hybrid Saw

02-12-2017 02:43 AM by JRsgarage | 40 comments »

Well, I’ve had the saw for going on a month but have not been able to use it. The saw arrived safely and the driver kindly brought it into my garage…had to tip him(great attitude).The assembly went smoothly, nothing too difficult. I had to shim one of the wings; everything was in my acceptable tolerance. The fit and finish was ok in most areas. The wings were grinded differently than the main tabletop which looked a bit cheap but I figured I can live with that. Everythin...

Read this review »


Laguna fusion table saw

Laguna fusion table saw

01-28-2017 01:34 AM by Hermit | 11 comments »

I’ve had this saw about a month now. It’s a major step up for me being out of woodworking for 20 plus years. Having just built my shop, this is my first major tool purchase second to a dust collector. I’m basically starting all over again.I did a lot of research, read a lot of reviews etc as others have done. I chose this saw for several reasons. 1. Great reviews on multiple websites.2. Appears to be good enough for an almost retired hobbiest. 3. Dust collection port on the ...

Read this review »


This Saw is GREAT !!

This Saw is GREAT !!

01-22-2017 10:50 PM by Kelster58 | 8 comments »

Got this saw last year. I was worried about the delivery and got the lift gate service from Grizzly. The saw came on UPS Freight. They called and made an appointment for delivery. They came with a lift gate trailer, they driver dropped the pallet at the curb, eazy peazy. I broke the pallet down and carried everything inside a piece at a time. Then put the body of the saw on my hand truck and into my shop everything went. I assembled the saw by myself. Had to shim the cast iron wings ...

Read this review »


Jet cabinet saw 3no 30" rip

Jet cabinet saw 3no 30" rip

01-22-2017 09:45 PM by Clk51212 | 8 comments »

Took delivery of my first cabinet saw on monday. Picked up at yrc terminal they loaded it in my truck and off I went. The saw was packed incredibly weLL double cardboard box around the saw and the fence and extension table were shrink wrapped in top. Think the only way they could damage this was to drop it off the dock. I have been a FedEx driver for 20yrs and have seen some ruff looking boxes but this was in fantastic shape. Set up was straight forward wipe the top and extension...

Read this review »


I wanted to really like this saw but dont

I wanted to really like this saw but dont

01-18-2017 03:07 AM by edwood1975 | 41 comments »

Hi Folks, So I have this saw for well over a year and have used it a lot and is supposed to be my go to tool in the workshop but sadly im not loving it… What I like:Its powerful enough for softwoodsIts very quietI love the castor mobile base that is attached. What I don’t like1. The fence guides suck .. the rail that guides the fence is forever out of alignment at least every month I have going underneath the front rail and tightening the nuts. I don’t like that the...

Read this review »


Preliminary review with useful shipping carton size information

Preliminary review with useful shipping carton size information

01-04-2017 06:44 PM by Jeff Mazur | 18 comments »

This isn’t a full review – haven’t even opened the box yet – but I want to post it in order to help others who may have had my same concerns about the size of the carton. FYI, the saw came shipped with cartons and pallet in EXTREMELY good condition (vendor was Woodcraft, shipped via UPS.) So, so far, 5 star experience with a happy surprise, read on for the surprise… My concern was about whether I could get the saw all the way into my workshop without having ...

Read this review »


Delta customer service

Delta customer service

12-24-2016 05:20 PM by Dedvw | 34 comments »

I guess that if you hear enough people saying the same thing, there might be some truth to it. This was the case with my recent Unisaw purchase. I went to pick the saw up at Lowes and when they brought it out it was packed in a fashion that was screaming damage me. It came in four separate boxes, the table saw body, the saw side table, the fence, and the bar that the fence sits on. As many other people have noted, the fence box and the side table box where destroyed. Laguna does a better job ...

Read this review »


Just got my G0715P delivered

Just got my G0715P delivered

12-05-2016 06:52 PM by BobinSachse | 26 comments »

I just got my Grizzly G0715P delivered on Friday. Lift gate service dropped it right at my shop door. pulled the saw and smaller pallet off of the delivery pallet and into the shop with my fridge dolly. Not too much trouble.Got to it on Sunday to begin set up. took about an hour to get it onto the Shop Fox mobile base. No helper available…. Everything was going just fine until I tried to install the rear rail to the table for the fence. It has 4 bolts to do this talk, two M10-1.5&...

Read this review »


Decisions, decisions...

Decisions, decisions...

11-29-2016 01:17 PM by Jarrhead | 11 comments »

I recently decided to upgrade my table saw. The JET 10” hybrid saw I bought new about 17 years ago has served me well, but I wanted to take advantage of some of the advancements in table saw design that have occurred since then. There were two major developments in table saws that I was adamant about having on my new saw. The first was a riving knife. Not merely a splitter, but a true riving knife that raises, lowers, and tilts with the blade. Back when I bought my JET, riving knives wer...

Read this review »


Byrnes Model Machines

Byrnes Model Machines

10-18-2016 06:24 AM by Bobthewoodbutcher | 4 comments »

About a year ago I bought (in fairly rapid succession) three of Jim Byrnes machine products. I had been looking for a miniature saw, and read glowing reviews of the “Jim Saw”. Well, I can attest to the super quality of all three of these machines in my shop. These were intended primarily for dollhouse furniture, but have been very useful for all sorts of projects. One of my current projects is a jewelry box that required many 1/4 and 3/8 panels. No sweat; just resaw (bandsaw) ...

Read this review »


« prev 1 2 3 4 5 ... 30 next »
295 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com