LumberJocks

Reviews: Tablesaws

  • Advertise with us
Craftsman 21802 (10 in. Table Saw with Stand)

Craftsman 21802 (10 in. Table Saw with Stand)

1773 days ago by michaeldmunro | 10 comments »

This being my first product review, I might miss some obvious things, but I’ll give it my best shot. At around $100, the Craftsman 21802 10 in. Table Saw is a good beginner’s saw. This is also my first table saw. I had no expectations other than when I was done I would be able to cut wood with it! The assembly was easy and I had it together in about 30 minutes or so. All the parts for the stands fit nice and everything lined up where it was supposed to. After assembly I set ...

Read this review »


My new unisaw

My new unisaw

1783 days ago by Joe | 37 comments »

I said to my wife “I think I am going to buy a new table saw” She said “why”..... you have one already. I said a present to myself for retiring out of the Navy with 22 years. She said go ahead just make sure you get the one you want. “WHAT”...... Well here she is. Yup, this is all I got done today Just putting it together. Hmm… a review on putting it together. Easy, you get this black folder manual looks like something you get with a new car. Anyw...

Read this review »


Delta 36-714 10-Inch left Tilt Hybrid Saw

Delta 36-714 10-Inch left Tilt Hybrid Saw

1784 days ago by cstrang | 5 comments »

This is a good bang for your buck, when I originally purchased the saw I got it for around $1200, it is a little more pricy today but none the less a good buy. It comes wired for 120 from the manufacturer but when I received it I got my electrician friend to ramp it up to 240, not much that I have in my shop can bog it down now. In my old High school we had a saw just like this one with the sole difference of it being connected to standard 120, I notice a big difference between them, if you h...

Read this review »


R4510 with PICS!

R4510 with PICS!

1790 days ago by LostinLA | 30 comments »

Hey Everyone - I’ve never posted here before, but I did a lot of research here before buying a replacement for my beloved cast iron Ridgid table saw. It had served me well through a major renovation, but now that the project is complete, I wanted something I could more easily tuck out of the way. I’d narrowed it down to the Ridgid 2410LS and the Bosch 4100, and was leaning toward the Bosch when I dropped in at my local Home Depot. The Ridgid rep happened to be there on a Sat...

Read this review »


Grizzly G1023SL TS Overall First Impression

Grizzly G1023SL TS Overall First Impression

1802 days ago by Kevin | 29 comments »

I received my new TS this past Thursday. The freight guy was kind enough to go ahead and put it in my garage for me :) That was excellent I thought and was not expecting that at all. This review will just be a first impression on how it was shipped and how easy/difficult it was to assemble the machine. 01. SHIPPING – 5/5 The shipping was great. No holes or damage at all on any of the boxes. It came with two boxes. One for the fence and other for machine. The cabinet came o...

Read this review »


Ridgid 4511 Granite Table Saw:  Really good saw at a great price.

Ridgid 4511 Granite Table Saw: Really good saw at a great price.

1806 days ago by mandmj | 29 comments »

I thought I’d post a review of my Ridgid 4511 Granite table saw for those who are interested. I purchased this in the spring w/ the ultimate power deal (or whatever they call it) for about $450. I’ve used it for several small projects now and have been pleased w/ the saw, but like most things in life, it wasn’t perfect. Pros:Granite top is uberflat. And hard. And rust free. Nice fence, easy to adjust and accurate, also easy to add faces (UHMW, etc) Herculift base is really amazin...

Read this review »


Great 115 Volt Saw

Great 115 Volt Saw

1816 days ago by Ben | 11 comments »

I finally received my supersaw after two months on backorder. It was worth the wait. Jet ran a Fathers day deal in June and I got it cheap. Assembly I spent the better part of a Saturday putting the whole machine together. Everything was packaged well and there was no damage. I would rate the manual a 7 out of 10. I did spend 20 minutes looking for one package of bolts that they had packed inside one of the fence rails with the cap on it. I finally read the manual very closely to ...

Read this review »


Skil 10 in 15 amp tablesaw

Skil 10 in 15 amp tablesaw

1819 days ago by kosta | 20 comments »

Yo whats up everybody on Wednesday of this week I got my skil tablesaw and I just wanted to give a quick review of it. Now the tablesaw setup will be episodes 40,41,42. In episode 42 I give a quick review of the saw after I make my first cut. Now I have used powermatic, delta/rockwell, jet,and dewalt tablesaws before and this one stood out. For the price I recommend this saw to anyone. The only problem I saw with it was that it didnt have extension wings and I was kinda pissed that it didn...

Read this review »


Grizzly G1023SL 10" Table Saw 3 HP Single-Phase 220V Left-Tilt

Grizzly G1023SL 10" Table Saw 3 HP Single-Phase 220V Left-Tilt

1847 days ago by Jon3 | 10 comments »

Disclaimer I’m an amatuer woodworker with about 3 years of experience. I am not a professional, and I’m not paid to do this kind of work. Also, my entire shop measures roughly 11’ x 22’, and includes some storage as well, so I may be more cautious about sizing and portability compared to your average woodworker. IntroductionI originally purchased this saw in June of 2007, and as this is July 2009, I’ve got 2 full solid years of use of it it so far, and it is...

Read this review »


Grizzly G0691 Table Saw

Grizzly G0691 Table Saw

1854 days ago by stitchop | 30 comments »

I have assembled my new G0691 Grizzly table saw, and made a few cuts, and will post my first impressions.I purchased this saw as soon as Grizzly put free shipping on it. This saw is replacing a 11 year old Craftsman contractor saw, and I expect it to be the last table saw I ever buy. .... Unpacking and assembly of the saw was a simple matter of following simple instuctions. All the parts were present and easily identified. The assembly starts with removing a brace from the tunnions. This ...

Read this review »


« prev 1 ... 15 16 17 18 19 20 21 ... 24 next »
240 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase