LumberJocks

Reviews: Tablesaws

  • Advertise with us
Chose G0715P over G0771

Chose G0715P over G0771

06-12-2015 10:29 PM by SoCalnewsaw | 5 comments »

Just received new G0715p. Lift gate delivery worth the $35 extra. I assembled on my own. Had to tip cabinet 45 degrees and support to remove pallet bolts. With bolts removed, lifted pallet way and tipped cabinet back up. Rating 4star until I get a chance to work more with the saw. Next step was to slide the shopfox base under the cabinet. Used long wrecking bar to lift cabinet edge and slip wood block to support. This left enough clearance to slide the base underneath in two pieces. Onc...

Read this review »


Review of Bosch 4100-09 saw and stand

Review of Bosch 4100-09 saw and stand

05-23-2015 08:29 PM by Ccl2011 | 5 comments »

PLEASE EXCUSE THE PICTURE, LUMBER JOCKS REQUIRED ONE. I AM AWAY FROM HOME AND COULDN’t RUN OUT TO THE GARAGE TO SNAP A SHOT. I am writing a review of my Bosch saw after a few months of use. I bought this saw last November after my Ryobi saw up and died during a project. I looked at several saws in the $600-$800 range and narrowed it down to four options. The Bosch and DeWalt jobsite saws, and the Delta and Ridgid contractor saws. My requirements were in a realativly compact saw th...

Read this review »


Great Saw!

Great Saw!

04-24-2015 01:11 PM by hybridn00b | 6 comments »

This is only my second saw, so that may limit the impact of my review, but it just might be my last! This beauty is built to last! I upgraded from a craftsman contractor saw, which was wildly inaccurate, but allowed me to realize that woodworking is going to be a lifetime passion of mine. A big factor in choosing this saw for me was the 115V option. Plus, the Powermatic logo screams quality to me. Obviously the saw is amazing, especially compared to the contractor saw i had previously. ...

Read this review »


Milling problem on table from manufacturer

Milling problem on table from manufacturer

03-31-2015 05:31 PM by RJRosa | 23 comments »

UpdateThis is a review of the customer service I’ve received from Grizzly for the above mentioned G0691 which arrived defective. I have not been able to use the saw yet and I will review that at a later time. If I ever get a working version. So I’ve been a member for a while but haven’t posted yet. I’m in the process of setting up my new 24×24 shop. After reading countless reviews and looking at my budget I decided on using the Grizzly brand for my large power ...

Read this review »


Great Saw - Keep it in Context

Great Saw - Keep it in Context

03-21-2015 06:20 PM by tblake1984 | 12 comments »

I have had this saw for two weeks and felt I had used it enough to write a balanced review of it. As you can see from the pics, I have added a router table extension, sacrificial fence, and a router fence. In summary, it is exactly what I was looking for. The footprint is perfect for a basement or garage shop and the mobile base works extremely well and is built to handle this 260lb saw. Getting the saw home is a bear. I was doing it solo and I have a basement workspace so I actually e...

Read this review »


A good value.....

A good value.....

03-07-2015 01:56 AM by Adrock1 | 16 comments »

I think I’m the first to review this saw so I’ll be as thorough as possible. Please forgive any sloppy typing. My computer is dead so I’m on my phone. Anyway I was in the market for a 120 volt saw and had it narrowed down to this grizzly or the new delta 36-725. I ended up with the grizzly. 1. Customer service I ordered over the phone as I had some questions about shipment. The lady that took my call was a pleasure to deal with and knew her stuff. The order process ...

Read this review »


Taking a chance on some known issues...

Taking a chance on some known issues...

02-02-2015 02:57 PM by MrZ2u | 34 comments »

It took some doing but I convinced SWMBO that I needed this…and that she should buy it for me as an anniversary+birthday gift…and since she wants me to build some cabinets for a recess in our new home and that I REALLY needed it because my other say ‘aint cutting straight anymore…must have got damaged in the move” Didn’t really feel like the effort to explain how the portable plastic body cheap-o I have really aint up to the tasks I am about to ask of it a...

Read this review »


SawStop Customer Service

SawStop Customer Service

01-28-2015 07:39 PM by RobS888 | 19 comments »

I purchased my saw in December and had some vibration problems, that re-tightening all the stand bolts mostly eliminated, but hey this is an $1,800 saw, so since I’m home this week, on Monday I filled out a service ticket on the website and got an email later in the day asking if it was just during slowdown, I said no always when on, a tech called me at 11:00 on Tuesday (yesterday) and had me do some tests with the belt disconnected from the motor and it still vibrated, so he said that ...

Read this review »


For the money, not a bad saw.

For the money, not a bad saw.

01-20-2015 09:40 PM by Dave Rutan | 12 comments »

I bought this saw several years ago as my first table saw. I shopped around for what I could afford and decided that this was the one I wanted. In no way to I regret that decision. Coming into the hobby from the ground up I wanted a saw that had all its parts. I would have been pretty clueless about any Craigslist buy as to features, missing pieces, etc. Aside from the metal stand, there was no assembly necessary to get this saw up and running. Everything was aligned properly and has served...

Read this review »


Review of Steel City Saw after a year

Review of Steel City Saw after a year

01-19-2015 03:59 PM by _Whitey | 5 comments »

Okay, Having owned my Steel City 35911G saw for about a year now I thought I would do a little follow-up. First off, I am happy with this saw. The fit and finish are acceptable, not too beefy so as to make it cumbersome, and not to chinsy to make it rickety, if that makes any sense. If you are a woodworker who likes everything to weigh as much as a WWII era tank, you may want to look elsewhere. The Granite definitely makes this saw heavy, but the rest of the saw is practical. The situation...

Read this review »


1 2 3 4 ... 26 next »
259 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com