LumberJocks

Reviews: Tablesaws

  • Advertise with us
I bought a SawStop JSS-MCA

I bought a SawStop JSS-MCA

02-23-2016 04:23 AM by Dark_Lightning | 26 comments »

I bought it today, after I found out that the Bosch REAXX GTS1041A isn’t going to be available for awhile yet, and I wanted to get a safer saw now, not whenever. The point of this post is to look at positive solutions you have come up with for MY alleged problems with the saw I just bought. That said- #1. The miter gauge is loose in the slots. (.010” “slop”). Yes, I know it is a contractor’s saw (edit to add- yes that is a Job Site Saw). I had expected better,...

Read this review »


Initial Review - Impression

Initial Review - Impression

02-18-2016 03:06 PM by Kalison | 10 comments »

Hello, Long time lurker and first time poster. I picked up my SawStop Jobsite Saw about a month ago, maybe just a little more than a month ago… so I thought I would share my initial impressions of the saw. I began my tablesaw days with a skil saw jobsite saw… which was the first and worst saw that I have ever bought. I used it enough to finish a simple project or two, and then I put it in the corner. Accuracy, Repeatability and Reliability were all very poor… but,...

Read this review »


Grizzly G0771 Table Saw Review

Grizzly G0771 Table Saw Review

02-05-2016 04:22 PM by Kristian_S | 9 comments »

Thanks to everyone for their advice regarding my table saw choice. Now that I have it set up, I thought I’d share my observations and experience with it, hopefully this will help someone in their choice. Delivery was reasonably quick (to CA), I purchased liftgate service and they brought the pallet into my garage for me. I feel sorry for whoever was receiving the pallet of Apple desktops I saw in the truck, a tall heavy package had toppled over and pierced about three of the boxes… SE...

Read this review »


Powermatic PM1000 one year in

Powermatic PM1000 one year in

01-17-2016 06:08 AM by rizzo | 15 comments »

I’m writing this on the one year anniversary, to the day actually, of my tablesaw…. This was not intended, but as I am currently sitting at the Atlanta airport waiting for my flight home, I thought it a good opportunity to write my follow-up review. One year ago today, I wrote an initial review of my saw, the review I wrote was solely about the purchase choice, delivery and setup. Here is the link to that review Initial Review The setup went great, with a very, very minor hiccup dea...

Read this review »


I finally made a decision on a saw.

I finally made a decision on a saw.

01-16-2016 05:00 PM by Ken90712 | 20 comments »

As a few of you know I have been on the fence so to speak on getting a new saw for some time now. I read and read and read on which one to get. I had it narrowed down to this and a Sawstop. We all know about the great safety features on the SS. They also build a great saw. However I finally made a decision on the Grizzly G0690 3hp 220 volt with the cast iron router table extension. I have a small shop so the router table is a no brainer for me. Money was somewhat a consideration although ...

Read this review »


Grizzly G0771 Comprehensive Guide

Grizzly G0771 Comprehensive Guide

01-11-2016 08:50 PM by ThomasLightle | 3 comments »

I got my Grizzly G0771 Table Saw in May 2015 and have been documenting my journey with it on YouTube ever since. If you are interested in what this saw has to offer, check out my videos below: UnboxingUnboxing of my new Grizzly G0771 table saw. This is a huge upgrade for my shop. Up until this point I have been using a portable Craftsman table saw that was adequate for construction, but lacking many features of even the most basic contractor saws, let alone hybrid saws such as this one. ...

Read this review »


Delta 36-725  table saw, 2 year review

Delta 36-725 table saw, 2 year review

12-14-2015 06:45 PM by kirbi69 | 2 comments »

Heres a link to the video… https://youtu.be/gQAhmnwS7FU

Read this review »


Grizzly G0771 Table Saw

Grizzly G0771 Table Saw

11-26-2015 02:02 AM by EMWW | 8 comments »

Overall I am happy with this saw. I will start with the good aspects of it. It has a decent fence and is fairly accurate once set up properly. The motor is powerful enough to do repeated 2 inch thick cuts in white oak. The blade raises and tilts very well. The saw is built heavy enough to make it run smoothly. And it can be set up 120 or 240. Now onto the cons, The dust collection is horrible. Even with the saw hooked strait up to the dust collector the majority of the dust stays in the cabin...

Read this review »


Einhell bt-ts 1500 U

Einhell bt-ts 1500 U

10-20-2015 09:21 AM by tamtum | 7 comments »

I had this table saw. The manufacturer specifications are good but it worked for two years before burned !!!! It is not stable and never accurate.Finally it has burned and I find the space to put my new dewalt dw745.

Read this review »


My Thoughts on the SawStop Professional Table Saw

My Thoughts on the SawStop Professional Table Saw

09-08-2015 02:48 PM by Rockfoot | 27 comments »

I’ve been woodworking since my 8th grade wood shop class back in 1982, but I didn’t purchase my own table saw until about 12 years ago. I bought a Rigid contractor saw from Home Depot and it served me well for many years. Since then, I’ve added many other large tools like the jointer, planer, bandsaw, router table etc… to complete my shop. A few months ago, I decided it was time to upgrade my old table saw to a 3HP professional grade cabinet saw. I narrowed down ...

Read this review »


1 2 3 4 ... 28 next »
271 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com