LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Milescraft blade changer

Milescraft blade changer

1682 days ago by kosta | 5 comments »

Yo whats up everybody I wanted to do a review of the milescraft blade changer. I have had this blade changer for about 2 weeks and it works pretty good. The way it works is you put it next to the blade and you raise the blade. It has to be lined up straight with the blade. Then you keep raising the blade until the changer lifts off the table that means that its locked in. Then you take the blade off. I have always had problems using a second wrench on the left side of the blade so this is muc...

Read this review »


Freud SD606 Dado set - Tradeoffs

Freud SD606 Dado set - Tradeoffs

1693 days ago by richgreer | 8 comments »

This dado set is the 6 inch version of Freud’s dial-a-width model. There are several things I like about it but, as is often the case, there are trade-offs. The dial-a-width concept means that you do not need any shims. The outer cutter has a mechanism that, effectively, causes the width of that cutter to expand up to 7/64 of an inch in increments of 1/256 of an inch. Using the dial-a-width mechanism in lieu of shims is very convenient. Me and those shims never got along very well....

Read this review »


I think this is a great  product, but you have to do some work.

I think this is a great product, but you have to do some work.

1698 days ago by JasonWagner | 13 comments »

I had some extra money from Christmas gifts and I wanted to splurge on something I didn’t need but knew that I would love to have. This table saw fence gauge is great. I can zero it whenever I want with different blades, dado stacks and even on my router wing. I think it’s great I can make routered dados and accurate distances without much thinking. You can switch between absolute measurements (from zero with blade) to short term measurements if you just wanted to cut 1”...

Read this review »


Incra's 52inch LS positioner package!

Incra's 52inch LS positioner package!

1711 days ago by BigBard | 16 comments »

One year ago I began the quest to make things from wood. I have learned so much in one year and I still have a long way to go. After a satisfying purchase of a Incra1000se miter gauge, I thought I couldn’t go wrong with this LS positioner plunge. I was right, this system cuts extremely accurate. That micro-adjust knob is excellent, you can move it by the thousands of an inch. You can truly move the fence with shear accuracy. The wonderfence did take a few extra steps to square up but it...

Read this review »


Way Better Than Home Made Inserts

Way Better Than Home Made Inserts

1725 days ago by Brad_Nailor | 16 comments »

I was going to do the usual cutting and fitting and fussing with making myself some ZCIs’ for my new Unisaw. Then I thought about exploring the world of commercially made inserts. there are allot to choose from. I was going to go with a system by Lee Valley/Veratris. It has very cool interchangeable plates and a single Alum. insert. But it was a little more than I wanted to pay ($79.00) for an insert. So I was at Woodcraft yesterday buying wheels, and I saw the Leecraft. It seemed reall...

Read this review »


 Incra TS-LS Table saw fence

Incra TS-LS Table saw fence

1727 days ago by Greg..the Cajun Box Sculptor | 12 comments »

I have been reading about the Incra Table Saw fence for a while now and finally decided to bite the bullet (or bite the wallet) and buy one. All that I can say is that this fence lives up to all the expectations I have of it. This gave me the opportunity to do a fine tuning of my Grizzly saw and adjust everything that could possibly be fine tuned before installing the Incra fence system. The setup was easy and fast with the well written instructions. Easy to install and easy to adjust. I spe...

Read this review »


7 1/4" thin kerf blade for your table saw.

7 1/4" thin kerf blade for your table saw.

1739 days ago by duasbata | 1 comment »

Haven’t used a thin kerf blade before so I purchased the 7 1/4” Freud Diablo Demo Demon Circular Saw blade for $15 from Home Depot just to see what all the hype is about thin kerf blades. What a difference and the price is right. Noticed that my saw sounds different and stops faster. There is significantly less dust. The saw feels more powerful when I’m cutting. The kerf is about 1/16” and the wood is ash.The blade stands at 1 3/4” when raised at it’...

Read this review »


Great Product (after you modify them)

Great Product (after you modify them)

1740 days ago by SteveMI | 3 comments »

I got a used TS couple monts ago that was an upgrade to me. It has the standard 3/4” miter slots in the cast iron table unlike my prior aluminum. So, while browsing the local Woodcraft for feather boards I saw the JessEm and thought to give them a try. Today I had a chance to actually use them and found they are a great product, but are having some manufacturing problems. The key to the design are some rectangle head bolts that slide in slots molded in the plastic feather boards a...

Read this review »


Happy With My First Blade Purchase

Happy With My First Blade Purchase

1746 days ago by Jimi_C | 8 comments »

So as promised (in Knottscott's review of the Delta 35-7657), here’s my review of its 60-tooth cousin. The night Scott reviewed that blade, I noticed Tooliday had the 60-tooth version up for $25, plus $5 S/H. I had been looking at Freud blades that were about $20-30 more, so I thought what the heck, I’ll give it a shot. I’ve been using a single 40-tooth blade for everything (came with the tablesaw I bought used of Craigslist), along with painters tape to keep the chippin...

Read this review »


Nice Tenoning jig, but....

Nice Tenoning jig, but....

1765 days ago by drfixit | 11 comments »

I had to modify it, by drilling new holes for the miter bar to use it on my Ridgid TS3612 saw. It has 2 sets of holes in it, but one set put it on top of my blade and the other set put it too far away. It was very easy to assemble other than this but after assembling it and adjusting it. It has 3 adjustable screws to fit your miter slot. It can be used for any angled tenon from 0 to 45 degrees. Wish I had bought one sooner.

Read this review »


« prev 1 ... 9 10 11 12 13 14 15 16 next »
160 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase