LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Tenonalisious

Tenonalisious

08-23-2012 04:16 AM by David White | 8 comments »

As is often the case with Carba-Tec tools (FYI, Carba-Tec is Australia and New Zealand’s equivalent to Rockler), this is probably some other companies product that has been bought under licence and rebranded (this is common place – my Carba-Tec branded bench top mortiser for example, came with an Axminster user manual). It is none the less an excellent piece of equipment and well worth the NZ$180 that I spent on it.It is very heavy and solidly made, and was bang on accurate right out...

Read this review »


Watch out Diablo - Irwin does it again,  this time with 24 teeth

Watch out Diablo - Irwin does it again, this time with 24 teeth

08-19-2012 03:29 AM by lumberjoe | 23 comments »

I’ve been sitting on these blades for a while as I have been quite busy. Brand new in the package I have a 24 tooth Diablo rip blade, and a 24 tooth Irwin Marples rip blade. I did a comparison of the diablo/Marples 50 tooth blades, but the Diablo I had was used a few times. This time for comparisons sake, both are brand spankin new. Note: this review is for the Irwin Marples blade that that will be the focus. The Freud Diablo was used for comparison. All cuts were performed on a perf...

Read this review »


Needs More Mag

Needs More Mag

08-06-2012 04:56 PM by pintodeluxe | 16 comments »

I have been interested in these magnetic featherboards since they first came out. Recently I saw Ridgid came out with their version so I gave it a try. The idea is masterful. The execution is not. Although the fingers are supple, with just the right amount of pressure, the featherboard will not hold its position well. It would be hard to pull the featherboard straight up from a cast iron surface, however it slides too easily. One of the main reasons for having a featherboard on the tabl...

Read this review »


A good product for a craftsman .113

A good product for a craftsman .113

08-05-2012 12:35 AM by Tedstor | 6 comments »

A won’t go too in-deepth here. Its a pretty simple product and it works well. The insert has 4 leveling screws to adjust flush with the table top. It also has adjustable screws in the top/side to prevent any lateral movement (see pic). The insert actually fit pretty well out of the box. After about 2 minutes worth of adjustments, it was dead-on. Seems to be good quality and I have no reason to think it won’t last for years. I’ll probably buy two more for dado and thicker, cr...

Read this review »


Micro Jig MJ Splitter Steel PRO System w/Double Splitters

Micro Jig MJ Splitter Steel PRO System w/Double Splitters

07-28-2012 03:28 PM by b2rtch | 25 comments »

This is not full review but a first impression. Being disappointed by another product that I bought to use for a riving knife , I have been looking around for another product which would give the protection/safety that I desire when using my Unisaw.Last week I found the Micro Jig MJ Splitter Steel PRO System w/Double Splitters and after watching the videos on YouTube I ordered one on Amazon for $25.00. I received it yesterday and I installed it this morning. On the videos the installation ...

Read this review »


Move over Diablo, Irwin got something right for once

Move over Diablo, Irwin got something right for once

07-25-2012 02:39 PM by lumberjoe | 51 comments »

Yesterday I found myself in Lowes. Rumor was they were offloading all of their CMT stuff cheap. While browsing around I stumbled upon the Marples blades. Disclaimer I have a saw blade addiction. If I see something new or exciting, I have to buy it. It’s a problem and I need help! Also I am not a fan of Irwin at all. Their marathon blades are pure garbage, and the “classic” blades are a downgrade from whatever came on your saw – as hard to beleive as that is. I did some...

Read this review »


1/2'' Power Twist Plus Link V-Belt

1/2'' Power Twist Plus Link V-Belt

07-21-2012 07:45 PM by David White | 16 comments »

Put this link belt onto my table saw this morning – it took all of 5 minutes – and am amazed at the difference it made. The saw is now almost totally vibration free and is much quieter too. If your saw vibrates, you need this belt.

Read this review »


A Mobile Base for the Table Saw and Jointer Woodriver Universal Mobile Base

A Mobile Base for the Table Saw and Jointer Woodriver Universal Mobile Base

06-19-2012 07:22 PM by Schimmel | 4 comments »

Here is my video review of the Mobile Base. I did one for my Jet table saw and one for my craftsman jointer. http://youtu.be/VFJNnUzlt_c

Read this review »


Couldn't figure out how to make them so I bought them

Couldn't figure out how to make them so I bought them

06-19-2012 02:17 AM by lumberjoe | 16 comments »

Since the Ridgid R5412 is such a popular saw, I figured I would review these. They are available everywhere online – woodcraft, Amazon, rockler, etc. Woodcraft has them in the store as well. Because of the design of this saw’s throat insert, it’s really hard to make your own. After seeing how these are crafted, I don’t think I could safely make one. LikesBoth of these are very well made. The instructions included are clear, and I don’t think they are outrageo...

Read this review »


Cuts great, manufacturing issues

Cuts great, manufacturing issues

06-18-2012 03:28 PM by lumberjoe | 1 comment »

To my suprise, my beautiful wife got me a sizable gift card to Woodcraft for fathers day. She gave it to me on Thursday because she also offered to keep an eye on the kids all weekend so I could spend a lot of time in the shop as she knows how much I enjoy it. Among other things, I picked up the Freud SD208 dado set. I have been meaning to get a dado set for some time, but have been procrastinating. I got that and the Leecraft zero clearance dado insert for my saw (which is awesome), among a ...

Read this review »


« prev 1 ... 7 8 9 10 11 12 13 ... 21 next »
201 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com