LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Shop Fox Table Saw Fence gets good marks.

Shop Fox Table Saw Fence gets good marks.

05-11-2009 08:44 AM by mart | 14 comments »

A friend flew down to the lower 48 to pick up a truck he bought and was going to be going through Washington on the way back to Alaska. I took advantage of the opportunity to have him swing by the Grizzly warehouse to pick up some equipment for me. In addition to an eight inch jointer which I will preview later, I had him pickup the Shop Fox Classic Fence System with Standard Rails. I finally got around to installing it yesterday and it couldn’t have been easier. It went on my old Grizz...

Read this review »


wixey digital angle cube

wixey digital angle cube

03-18-2012 11:11 PM by jpatte | 29 comments »

I bought this product because I was tired of assuming that the bevel scale on my table saw was correct. I was shocked to see just how bad it really was. All in all I’m impressed with the product, it has one job and it does it well. The only thing I have found is that when it gets cold, for instance when it sits in an unheated shop, it doesn’t always read true. This is easily fixed by zeroing it out on the table and checking the blade bevel again.

Read this review »


Top Saver works as advertised

Top Saver works as advertised

09-26-2009 07:27 PM by Bothus | 4 comments »

This is an excerpt from my blog posting about restoring my Unisaw. I thought it worked as a review. You can read the original/view the original post HERE. I would have given the product 5 stars except that while it worked much better than I expected in reality it is only as good as the amount of elbow grease you use with it. Enjoy! Where da hail did you get those glasses? You look like yo Aint Bea in Shreveport. Scrubbing away. .Top Saver first pass Top Saver 3 Honey! Top Save...

Read this review »


Mule Cabinetmaker M-21 Miter Gauge Fence

Mule Cabinetmaker M-21 Miter Gauge Fence

09-28-2009 03:23 AM by jeffreythree | 1 comment »

I needed a miter gauge fence and decided to order this one with the rip fence I ordered. It looked to be well made and better than any wood add-on I made. I was disappointed when it came in with no packing material, and, sure enough, one of the plastic knobs was busted into 3 pieces. The first pick shows everything that was in the box(except for a little instruction sheet). Today I took apart my trusty old Delta miter guage to drill some holes to mount the fence(it appears to fit more mod...

Read this review »


Great for uneven floors

Great for uneven floors

10-14-2009 06:39 AM by DannyBoy | 8 comments »

From the start, I needed to make sure that my saw would be movable. With a small shop, floor space is at a premium and it only makes things difficult to admit that my floor is not at all level and even. This system took care of both of those needs. The casters are well built and work well on the uneven floor. Plus, once you are done moving the unit, you flip it down onto it’s own feet right into your floors sweet-spot. Two bits of advice: First, you probably won’t matc...

Read this review »


Tenryu Gold Medal Dado Not Exactly What I Had Hoped For.

Tenryu Gold Medal Dado Not Exactly What I Had Hoped For.

10-20-2009 05:48 PM by Russ Anderson | 15 comments »

This is a brief review of the Tenryu GMD. First Impression: The blades look of extremely high quality with thick bodies. Box: I personally don’t like the wood box because you have to lift out all of the chippers in order to get to the outer blades. Cut Quality: The side blades are excellent in MDF, and Plywood core veneers, as well as melamine. The bottom of the dado is the flattest, smoothest that I have seen. I’ve owned two previous dado sets, one from Systi-Matic, and ...

Read this review »


Nice Tenoning jig, but....

Nice Tenoning jig, but....

10-28-2009 05:22 AM by drfixit | 11 comments »

I had to modify it, by drilling new holes for the miter bar to use it on my Ridgid TS3612 saw. It has 2 sets of holes in it, but one set put it on top of my blade and the other set put it too far away. It was very easy to assemble other than this but after assembling it and adjusting it. It has 3 adjustable screws to fit your miter slot. It can be used for any angled tenon from 0 to 45 degrees. Wish I had bought one sooner.

Read this review »


Happy With My First Blade Purchase

Happy With My First Blade Purchase

11-16-2009 07:03 AM by Jimi_C | 8 comments »

So as promised (in Knottscott's review of the Delta 35-7657), here’s my review of its 60-tooth cousin. The night Scott reviewed that blade, I noticed Tooliday had the 60-tooth version up for $25, plus $5 S/H. I had been looking at Freud blades that were about $20-30 more, so I thought what the heck, I’ll give it a shot. I’ve been using a single 40-tooth blade for everything (came with the tablesaw I bought used of Craigslist), along with painters tape to keep the chippin...

Read this review »


Great Product (after you modify them)

Great Product (after you modify them)

11-22-2009 02:01 AM by SteveMI | 3 comments »

I got a used TS couple monts ago that was an upgrade to me. It has the standard 3/4” miter slots in the cast iron table unlike my prior aluminum. So, while browsing the local Woodcraft for feather boards I saw the JessEm and thought to give them a try. Today I had a chance to actually use them and found they are a great product, but are having some manufacturing problems. The key to the design are some rectangle head bolts that slide in slots molded in the plastic feather boards a...

Read this review »


Way Better Than Home Made Inserts

Way Better Than Home Made Inserts

12-06-2009 08:10 PM by Brad_Nailor | 16 comments »

I was going to do the usual cutting and fitting and fussing with making myself some ZCIs’ for my new Unisaw. Then I thought about exploring the world of commercially made inserts. there are allot to choose from. I was going to go with a system by Lee Valley/Veratris. It has very cool interchangeable plates and a single Alum. insert. But it was a little more than I wanted to pay ($79.00) for an insert. So I was at Woodcraft yesterday buying wheels, and I saw the Leecraft. It seemed reall...

Read this review »


« prev 1 ... 9 10 11 12 13 14 15 ... 17 next »
165 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase