LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Infinity Zero Clearance Throat Plate and insert for sawstop table saw

Infinity Zero Clearance Throat Plate and insert for sawstop table saw

12-15-2012 03:10 AM by mbs | 16 comments »

The sawstop zero clearance insert doesn’t have enough support towards the back of the blade therefore the insert dips down below the top of the table. When cutting narrow wood, the leading edge of the wood catches on the top of the table which isn’t a safe situation to be in.. I recently heard about the Infinity billet insert and ordered it the same day. I don’t have any relationship with Infinity. The insert is machined out of aluminum and has a very nice anodized ...

Read this review »


Review of the Woodcraft Anti Kickback Safety Rollers

Review of the Woodcraft Anti Kickback Safety Rollers

02-11-2014 01:33 PM by steve_in_ohio | 16 comments »

I bought these rollers a couple of days ago because my table saw is old and it doesn’t have a riving knife and I don’t like to use the blade guard. Also I had problems when running long boards thru the table saw that they would try to move away from the fence, so I bought these rollers. I mounted these on my fence with a t-track instead of the rail that it is sold for these. After some simple assembly I started using these and I love them. They hold the wood down to the table and ...

Read this review »


Incra Miter Express / Miter 1000SE - VIDEO

Incra Miter Express / Miter 1000SE - VIDEO

01-13-2008 05:29 PM by mot | 15 comments »

I wanted to add to the mitre gauge posts. Wayne posted a photo tour of the Jessem System, and David posted initial impressions of the Kreg System. The incra 1000SE is seen here in the Incra Miter Express sled. Both are available at Woodpeck.com You can see the kerf where the mitre sled straddles the blade in the tablesaw allowing for the cutoff piece to be coplanar with the workpiece. This decreases the chance of the saw flinging the cutoff piece back. The Incra guage is adjutab...

Read this review »


100x better than the stock miter gauge

100x better than the stock miter gauge

02-03-2011 12:23 AM by Vrtigo1 | 15 comments »

Just picked this up from Amazon last week and it arrived two days ago. Assembly took about 30 minutes and was straightforward. I especially like the adjustability of the bar that fits in the miter track. It was close right out of the box, but after adjusting it, there is literally zero play and it still slides like butter. The abrasive that sticks to the face of the miter gauge really works. I cut a few test miters and the workpiece stayed exactly where I put it. The extendability is ...

Read this review »


Nice going Pal

Nice going Pal

05-23-2009 04:03 AM by Routerisstillmyname | 15 comments »

If you have a contractor TS and extra 20 dollars burning hole in your pocket then maybe you should splurge on one of these before the gas goes back up to 4 a gallon.And that’s just what I did today. I didn’t need them or have to have them to align the 3660. I had already got it to 0.001. But I’ve never been fond of contractor saw trunnions. When I finally got my saw last year,(Table saws scare the heck out of me) it took slight modifications to get my saw to register 0.001. And during that ti...

Read this review »


Mule Cabinetmaker Accusquare Rip Fence

Mule Cabinetmaker Accusquare Rip Fence

09-28-2009 03:57 AM by jeffreythree | 15 comments »

All of the sizes are the same other than the rail lengths. I opted for the 25” one because my Delta Homecraft TS is pretty small. It came with only a few token wads of newdpaper to protect it, and the main knob was broken because of it. This one uses a rear rail, which I like and have not mounted yet. It also works well so far without the rear rail attached. The first pic shows what it came with: a bag of hardware, a rear rail, the fence, the front rail, and no instructions. You c...

Read this review »


Tenryu Gold Medal Dado Not Exactly What I Had Hoped For.

Tenryu Gold Medal Dado Not Exactly What I Had Hoped For.

10-20-2009 05:48 PM by Russ Anderson | 15 comments »

This is a brief review of the Tenryu GMD. First Impression: The blades look of extremely high quality with thick bodies. Box: I personally don’t like the wood box because you have to lift out all of the chippers in order to get to the outer blades. Cut Quality: The side blades are excellent in MDF, and Plywood core veneers, as well as melamine. The bottom of the dado is the flattest, smoothest that I have seen. I’ve owned two previous dado sets, one from Systi-Matic, and ...

Read this review »


I like I-Box

I like I-Box

01-03-2014 06:46 PM by Kerry Drake | 15 comments »

Got the I-Box for Christmas and finished setting it up yesterday. The pictures show my very first test pieces using a 3/8 inch dado stack. Once you understand what’s going on with the jig, it is very easy to use and it gave me near perfect results on my very first test. Set up takes about 15 minutes out of the box, but it comes with a very good set of instructions and a DVD showing the entire process from beginning to end. For me, now, the hardest part about making really good bo...

Read this review »


Heavenly Performance

Heavenly Performance

11-17-2013 07:24 PM by maplerock | 15 comments »

I have been struggling with my table saw. It was not a joy to use. Although it is a dream of a saw (unisaw 36-953), the performance was lacking. The effort I needed to push boards through was far more than should be necessary. I had my blades sharpened (Freud Diablo and another carbide tipped blade) and had no noticeable improvement. I bought a new combination Orion blade. It was better, but not good enough. I noticed the blade and table were a little out of alignment. After fixing ...

Read this review »


Smartmiter miter gauge sled

Smartmiter miter gauge sled

05-09-2008 09:08 PM by OttawaP | 14 comments »

I’ve been in the market for a new miter gauge . I’ve sold my previous Kreg due to it’s short length and light structure. While it was exceptionally accurate, I just found the crosscut length too short and was always afraid if I ever dropped it would be bent. I considered the Jessum, Accumiter, and Osbourne as the top contenders until I found the Smart Miter. The Jessum I found a little fiddly with the two pin set up and there did seem to be some issues with this system from what I’ve read on...

Read this review »


« prev 1 ... 3 4 5 6 7 8 9 ... 17 next »
165 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase