LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Accuracy is Art

Accuracy is Art

01-25-2008 04:14 AM by Bruce | 18 comments »

Greetings from West Virginia. I’m new here but I have been dying to tell someone about my new toy. I just got the Osborne EB3 Miter Gauge for Christmas and its great! I have a Grizzly G0576 left tilt table saw and the stock miter gauge was ok for rough cuts but it just was not accurate enough in my judgement. Even though I adjusted the guide bar, it still would move slightly in the slot. The angles were difficult to set and I had to look for my protractor to double and triple check...

Read this review »


Incra TS-LS Table Saw Fence

Incra TS-LS Table Saw Fence

10-12-2012 10:11 PM by Slimey243 | 18 comments »

I see that the last review was posted around 3 years ago. I bought this item several weeks ago and couldn’t be more pleased with it. What the other 3 people said about it is still true today! I am totally amazed how accurate this system is when making my cuts. I just wish I would have been able to afford the router table combo!

Read this review »


Tablesaw Essentials.

Tablesaw Essentials.

03-01-2008 04:43 AM by gizmodyne | 18 comments »

Well you could get by without them. $15 a pair from Rockler. What the heck are they? They hold aux. fences and stopblocks to your existing rip fence, for crosscutting and dado operations where the blade would otherwise obliterate your existing fence. Just rip a piece of ply, melamine, or other stable stock, drill two holes for the clamps, and clamp away. The biesemeyer aux. fences with clamps are around $150. The only advantage I see is that their fence is exactly 1” thic...

Read this review »


Rock solid Rockler tenoning jig

Rock solid Rockler tenoning jig

03-18-2008 06:08 AM by GusRod | 18 comments »

I’ve used shop made wood and metal tenoning jigs before but this one far exceeded my expectations. The tool is as hefty as they come but glides along the miter slot as if it was on a cushion of air. It’s clamp is strong enough to easily hold three foot 4×4’s for a blacksmith workbench I made recently and it’s various adjustments make it ideal for accurate cuts on cabinet and furniture work. I highly recommend this tool and at around sixty five dollars it is well w...

Read this review »


Osborne EB-3 Miter Gauge works right outa the box

Osborne EB-3 Miter Gauge works right outa the box

02-25-2014 11:11 PM by eddie | 17 comments »

i always have trouble with 45 and have been wanting a good miter gauge and a friend was over the other day and told me he had this one and had had good results with it ,so i order one and it cut true 90s and really good 45s right out of the box its straight forward and easy to use gauge ,got to give it 5 stars ,thanks for looking http://youtu.be/F-uGZkJBQ44

Read this review »


The best table saw (and shop) accessory I have ever owned

The best table saw (and shop) accessory I have ever owned

02-26-2008 08:45 PM by RickH | 17 comments »

At the first woodworking show I attended years ago I became aware of the Incra table saw fence systems, and bought their first version almost 10 years ago. I upgraded to their LS system (lead-screw) about 4 years ago by purchasing a new postioner w/machined fence, which is even easier to use. What the Incra fence does is allow for precise and repeatable fence alignment on your table saw: > Precision – allows adjustments as fine as .001”, though their standard measuring meth...

Read this review »


Micro Jig SteelPro Splitter - for 1/8" Kerf Blades

Micro Jig SteelPro Splitter - for 1/8" Kerf Blades

02-02-2010 05:41 PM by PetVet | 17 comments »

You can purchase this product from Incra for about $35. I was interested in getting a splitter that I would use, as my rip guard/splitter was a pain to install every time I wanted to rip something.It comes as a kit, with an installation jig, and several splitters of various widths. The instruction sheet was fairly easy to follow. You need a couple pieces of 1/2 inch stock, one for the jig to attach to, and one as a test piece. They have you drill the holes in your saw insert with the prov...

Read this review »


Rockler Table saw fence micro adjuster

Rockler Table saw fence micro adjuster

07-16-2010 02:30 AM by lilredweldingrod | 17 comments »

I bought the Rockler table saw fence micro adjuster on sale cheap with free shipping. That takes most of the sting out. Every time the handle gets bumped, even slightly, it falls a part. After regluing this cheaply made junk several times, I drilled and install a 8-32 screw and nut and peened the end at the nut to prevent it from backing off. It hasn’t broken since, but I do not leave it on the saw except when I need it. Save your money on this one. I’m sure there ar much better d...

Read this review »


Excellent once tuned

Excellent once tuned

03-25-2012 12:41 AM by mcase | 16 comments »

Let me start by saying that I am very pleased with the results of this miter gauge. The cuts it produces are consistently great. I check them against a Mitatoyo machinist square and they are dead on. They are far, far more accurate and consistent then those produced by my Bosch slider. There are however some limitations and problems which I will explain in detail so my fellow LJs will know just what to expect. I bought the Incra 1000 SE about three months ago. The Incra 1000 SE comes...

Read this review »


Taper jig for us lazy folks

Taper jig for us lazy folks

02-25-2008 04:23 AM by sIKE | 16 comments »

Got this when I was in the Cambridge Rockler store. I had been thinking about making my own but this one is only $15 and I couldn’t pass. It works as designed, both sides of the fence. Some specs from the Rockler site: Cut tapers up to 3’’ per foot/15ยบ slope. Graduated metal scale makes it easy to cut tapers at desired angles. Easy to use and easy to adjust. Offers measurements in degrees and inches per foot of taper. I cut the the piece of red oak in the bottom of th...

Read this review »


« prev 1 2 3 4 5 6 7 ... 17 next »
165 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase