LumberJocks

Reviews: Tablesaw Accessories

  • Advertise with us
Incra - Customer Service

Incra - Customer Service

02-24-2014 08:24 PM by twobyfour16 | 22 comments »

Just a quick review of Incra’s customer service – which I give a resounding 5 stars! I bought one of their table saw router table combo packages back in mid December & just got around to opening up the boxes. I am installing the fence system and router table on a new SawStop PCS that I just picked up this weekend. First of all, their ordering process and shipping were spot-on. Obviously, I should have opened up all of the packages when I received them, but I did not open u...

Read this review »


Incra Miter 5000 is very nice!

Incra Miter 5000 is very nice!

01-02-2014 02:38 AM by Justin8152000 | 22 comments »

I have made a couple sleds and setups like this but I had heard so much good feedback on Incra and their stuff I took the plunge and got lots of stuff and this is one of the things I bought….. I have a Ridgid sliding compound saw and at times I just dont trust it. I bought this with the intentions of using the compound saw less and having a well made sled to replace my homemade one. First impression: Crap another Incra erector set and I wish it would of been phenolic instead of lam...

Read this review »


Harbor Freight Link Belt

Harbor Freight Link Belt

11-30-2010 12:15 AM by ChuckC | 22 comments »

A Harbor Freight opened up about 15 minutes from where I live. I took a ride out yesterday and walked the aisles for about 30 minutes. It’s not the kind of place I’d buy a parachute from but you can get a good deal on some of their stuff. I ended up buying a 5’ link belt for $24. I replaced the stock belt on my jointer with it and noticed a dramatic improvement in vibration. I’ve never had a competitors belt to compare it against but I am happy with their’s so I&...

Read this review »


Why pay more?

Why pay more?

10-29-2010 03:42 PM by lovinmrv | 21 comments »

I bought a new (used) craftsman belt drive table saw about a month ago and was amazed at the vibration. So, following the lead of all the LJ’s who love their link belts, I thought I’d give it a try. In comparing prices, I found two price points:- Harbor freight at $4 per foot, and- Everyone else at $8 per foot. Yankee that I am, guess which price point I chose? I adjusted the length and installed the belt in under 30 minutes last night (Note: I sized the belt to match th...

Read this review »


Osborne EB-3 Miter Gauge

Osborne EB-3 Miter Gauge

07-31-2009 12:09 AM by Don K. | 20 comments »

I know Schummie just did a review of this miter gauge yesterday….But I just got mine also…and thought I would tell you what I thought so far. First this is a great miter gauge that came out of the box DEAD on accurate. It was extremely easy to assemble and adjust to my saw. Second…other than saying how great it is and accurate it is (Which by the way I already said…lol) I figured I would show a few things. As you can see….it is extremely long even with ...

Read this review »


Laguna Professional Sliding Table

Laguna Professional Sliding Table

03-22-2011 06:55 AM by thamar | 20 comments »

As part of my shop upgrade, I decided to ditch my old “Mule” sliding table. I ordered the Laguna Professional Sliding Table. The website indicated that it would fit my Delta Unisaw and the person I talked to at Laguna said that some of their customers had mounted it on Unisaws. Once I received the sliding table, it just didn’t seem to me that it would fit my right tilt Unisaw. The right hand mounting bracket would have gotten in the way of the tilt wheel. The sliding...

Read this review »


Amazing improvement on my table saw

Amazing improvement on my table saw

05-02-2014 09:02 PM by jakep_82 | 20 comments »

I’ve already replaced the belts on most of my machines with link belts, but I never really felt like it was a huge improvement. After swapping the belts on my table saw I realize just how much difference they can make. I have a 15 year old Grizzly G1023 which has a triple 3L belt pulley. I bought the saw for a song on Craigslist because it had a blown motor, but I had no idea how it ran. After I got the motor fixed I found out it had a significant thump at startup, as well as some...

Read this review »


A great upgrade to a non-riving knife saw

A great upgrade to a non-riving knife saw

04-24-2010 11:24 PM by JasonWagner | 19 comments »

Product web page: www.leestyron.com I have wanted to order a Shark Guard from Lee for quite some time. One night this winter I went for it. At the time he said (on the webpage) the wait was about 3-4 weeks. I didn’t get a confirmation email (maybe it got filtered) and somewhere around two months later I got the shipping notice for the guard. I didn’t try to contact Lee myself so I’m not really complaining. The whole thing came in about two days from the shipping n...

Read this review »


SawStop Dust Collection Blade Guard & Over Arm Dust Collection

SawStop Dust Collection Blade Guard & Over Arm Dust Collection

12-30-2010 03:16 AM by Darell | 19 comments »

Received this dust collection system for Christmas. Goes to show that momma pays attention when I send her hints. LOL! Anyway, installation is very easy and straight forward. The biggest issue, at least for the Contractor Saw is that the splitter & riving knife are slightly thicker with this upgrade. The old splitter/riving knife being .079 and the new one .090. This means you will need to readjust the riving knife lockdown clamp slightly so there isn’t to much pressure on the...

Read this review »


Review of the Ridgid Universal Digital Miter Gauge

Review of the Ridgid Universal Digital Miter Gauge

10-12-2011 09:07 AM by David Grimes | 19 comments »

This is the Ridgid Universal Digital Miter Gauge. Lets start with the Universal part. The miter slot bar has a clever lobed t-slot washer that quickly adjusts and locks to the width of any t-slot lower trough. If your miter track is just plain square, then it rotates and locks in flush. They even threw in an extra bar for the non-standard undersized slots that are used on many table top machines. I believe it is truly universal and well-designed. The head unit attaches to a fairly be...

Read this review »


« prev 1 2 3 4 5 6 ... 17 next »
166 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase