LumberJocks

Reviews: Scroll Saws

  • Advertise with us
Reposting From My Regular Blog to Review the EX-21 Scroll Saw

Reposting From My Regular Blog to Review the EX-21 Scroll Saw

1098 days ago by Sheila Landry (scrollgirl) | 18 comments »

After several months of waiting and anticipation, the moment finally arrived when I got a chance to really get to know and work on my new Excalibur scroll saw! Even though I had the saw delivered to the show in Saratoga Springs, there was little time for me to enjoy it and really run it through the paces. I was very busy at the show and I must say that I was only at the booth a couple of hours a day, during which time I was usually talking to people who stopped by. Both Keith and I were ...

Read this review »


Delta  40-690 20" scroll saw

Delta 40-690 20" scroll saw

803 days ago by RetiredCoastie | 6 comments »

I was lucky enough to get this saw while Woodcraft’s had it on sale for $349.00 last week. It was delivered today and I stoped everything I was doing and put it together. After reading reviews that dinged it for some problems I inspected it carefully. One of the issues was the attach screws for the light. I inspected the screws and then the threads in the saw housing. I found that the first few threads were non existant and the screws were just a bit to short and had no bite. I bought l...

Read this review »


Dewalt 788 Scroll Saw

Dewalt 788 Scroll Saw

903 days ago by moonls | 20 comments »

I’d been using my Craftsman 16” scroll saw off and on since 2003, and recently, with a renewed interest in scroll work, I started trying to improve my skill. I was becoming frustrated with keeping the very small pinless blades secured in the holders and maintaining proper tension. The other big problem was vibration. Having researched the different saws on the market, it became apparent that the Dewalt was the best rated of the bunch in my price range. I ordered one on-line ...

Read this review »


16" Variable Speed Scroll Saw

16" Variable Speed Scroll Saw

1974 days ago by Handi75 | 5 comments »

This is a New addition to Craftsman Scroll Saw Series. The first one that I had, I’ve only used it twice, and if it wasn’t for the Replacement Warranty that I purchased just in case, I wouldn’t have this replacement now. So far, this Version of their Scroll Saw has Held up very well. There are only a few complaints with it thou. 1. The table is a Little Small2. The Table Tilt only tilts up to 45 Degree to the left Only, Not both left and right3. It does not hav...

Read this review »


Task force scroll saw review

Task force scroll saw review

1856 days ago by kosta | 3 comments »

This scroll saw is a very nice saw for $100 and is worth the money. The first thing you have to do is tape up the led light and remove the guard because you cant do interior cuts and it gets in the way. The saw also has a blower and a vaccum port help collect the dust it uses a tool to change the blade which is a pain in the ass but other than that it is a nice saw with a lot of features that would see on a more expensive saw. It doesnt have a foot switch but has a varible speed and the light...

Read this review »


Good saw, with modifications!

Good saw, with modifications!

1456 days ago by msdameng | 6 comments »

Straight out of the box you will be dissapointed with this saw. Some of the major flaws are very pronounced vibration above the 1200 spm speed, the blower is not nearly strong enough, the knob to tighten the tilt on the tabletop is made of of soft rubber and will bust if overtightened, also if you plan on using the holddown foot it is almost impossible to get it tight enough to not twist if the piece of wood you’re cutting actually tries to pull up against it. However, I have found th...

Read this review »


Craftsman 16 inch Scroll Saw Review

Craftsman 16 inch Scroll Saw Review

731 days ago by Daris | 2 comments »

For my birthday recently my wife purchased me a scroll saw. (That’s right fella’s she’s all mine) Having never owned a scroll saw, and quickly realizing that I’m a novice to this tool; I’ll do my best to give an honest review of this tool. But… Before I can start I have to give a little insight to my scroll saw bias’. I’ve been doing the “woodworking thing”, for a few years now and I’ve always thought I had all of the tools that I needed. I also have always had two opinions when it c...

Read this review »


Delta Q3 40-650 Scroll Saw

Delta Q3 40-650 Scroll Saw

1176 days ago by gbrown4 | 2 comments »

I recently acquired this Q3 scroll saw from Craig’s list. I was able to barter for it, amazon.com gift card trade. The seller acquired it from her father who recently passed away. The seller had no clue what it was so she was eager to trade for it. First off I notice it was missing the off/on switch and knob. It was rusty and dirty. I found a switch for $2.50 and replace the bent screws on the quick set blade clamp both upper and lower. I cleaned up the surface rust and wiped eve...

Read this review »


a good first saw?

a good first saw?

1355 days ago by thefishingschool | 17 comments »

i want to start scrolling and dont have a very large budget. i have been thinking about this saw if you have this saw or are just reading feel free to throw your 2 cents in also if you can think of another good atarter saw please post a link

Read this review »


Problematic Hitachi CW-40

Problematic Hitachi CW-40

1561 days ago by solidoak | 32 comments »

Let me perfectly honest and up front here. I have owned the Hitachi CW-40 for about a year now. In some categories it performs very well. For instance, I like the soft start feature and the saw has very little vibration. But I consider there to be at least 2 MAJOR PROBLEMS with this saw. 1. The first problem is that it will not accept a spiral pinless blade. I have tried just about everything to install a spiral blade in this saw, but nothing I do works. The blade kinks, or breaks, or...

Read this review »


« prev 1 2 3 4 next »
35 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase