LumberJocks

Reviews: Router Accessories

  • Advertise with us
Leigh Super 18 Jig

Leigh Super 18 Jig

03-01-2008 02:27 AM by trifern | 7 comments »

Leigh Super 18 Dovetail Jig – Rout Through, Half-blind and Sliding Dovetails as well as two sizes of box joints and single pass Half-blind dovetails. Additional joints are possible with an optional Finger Joint Template and an Isoloc template. Everything you need in one box. Features: Infinitely adjustable guide fingers, Variably spaced through dovetails, Variably spaced half-blind dovetails, Sliding dovetails, “Single Pass” half-blind dovetails, 5/16” & 5/8” box joints, Non slip...

Read this review »


"Professional" Woodworker Router Bit Set

"Professional" Woodworker Router Bit Set

05-08-2013 05:02 AM by rivox1 | 27 comments »

Hello Jocks, As a beginner woodworker I needed a set of router bits, but didn’t want to take on a second mortgage to be able to afford a premium set, so I decided to buy this bit set in order to try out different bits. My line of thinking was to see which ones I used the most so that I could buy one by one the most indispensable ones of a better quality. I picked up this set for a little over $100. It contains 75 pieces and at first glance looks really nice. On my daily vocabul...

Read this review »


Anyone Looking For Some Cheap Tail?

Anyone Looking For Some Cheap Tail?

01-09-2011 02:31 AM by DaveTPilot | 9 comments »

When I first saw this jig advertised I said, ”$34.99 are you kidding me? It’s got to be a piece of *#@&!” I had never used a dovetail jig before but heard some horror stories from people who have used some of the “cheap” jigs. I looked at a few videos online and from what I could tell, for less than 35 bucks with a dovetail bit included, the EZ Pro Dovetail Jig was worth a try. The jig comes with a dovetail bit and a spacer for making joints in stock wide...

Read this review »


A Decent Jig

A Decent Jig

08-25-2015 09:44 PM by whope | 5 comments »

I had picked this up at least a year ago and the project I had in mind never made it beyond the thinking stage. I finally opened it up to do a simple walnut disk (will be posted later). I had used the smaller guide (M200) and have been happy with it. This jig centers very easily with a 1/4” steel pin and an insert that fits into the router opening. It fit fine on my DeWalt 618. The guide pivots around an 1/8” steel pin that you put into the hole that marks the size of the circl...

Read this review »


Milescraft 1207 Router Design Inlay Kit

Milescraft 1207 Router Design Inlay Kit

07-02-2010 06:48 PM by ChunkyC | 7 comments »

I purchased the Milescraft 1207 Router Design Inlay Kit because a friend wants me to inlay the Wisconsin “Running W” logo into a lid for him. The kit comes complete with everything that you need to get started routing inlays. I had to make a trip to the hardware store for M4×12 pan head screws to mount the universal base plate to my Freud router. It comes with 7” Universal Base Plate with the Turnlock system, three guide bushing, 4 templates with multiple cutouts, ...

Read this review »


Great Starter Routing Table

Great Starter Routing Table

12-22-2011 12:09 AM by brtech | 6 comments »

If you need a decent quality routing table, a build it yourself option just isn’t right now, this is your choice. I’ve looked around, and this is the best value. Easy transaction and fast delivery from Griz. Picked up a coupon that helped some. It’s a heavy box, well packed. Typical Griz manual, with one exception, see below. Basically, you assemble rails to the bottom of the table top, assemble the legs to those rails and add the braces to the middle of the leg...

Read this review »


Leigh R9 Plus Dovetail Jig initial impressions

Leigh R9 Plus Dovetail Jig initial impressions

01-23-2012 07:50 AM by Jake Willet | 5 comments »

New on the market from Leigh is a consumer friendly dovetail jig. Assembly takes an hour. The instructions tell you to use 5/8” mdf. I had a hell of a time finding this and ended up stealing it from the top of a rolling tool cabinet at work. The beam assembly was pretty straightforward. 8/4 beam and 5/8” mdf. The way you have to use this necessitates using 5/8” material as a backer board. I cut 12 backer boards. I used 1 for an initial test. The jig worked great and...

Read this review »


Classical Plunge Bit Failure.

Classical Plunge Bit Failure.

09-26-2015 09:12 AM by robscastle | 11 comments »

An interesting situation occured when I was making Edna’s Kitchen Benches. I was routing a profile in the length of the leg when whilst using a Mustarka Router bit I routed over or through a knot.This knot completely totalled my new router bit in one pass. History: This was a brand new unused bit and very similar profile to Photo 1 it was a 1/4 shank, 19mm dia but a 3.2 radius. The profile on the bit is similar to the I have posted in photo No 1. (from what I can see the only ...

Read this review »


First Blush Impressions

First Blush Impressions

10-01-2011 06:56 AM by DynaBlue | 14 comments »

Disclaimer: I’m not a professional reviewer and these opinions are mine and mine alone! Retail Price: $149.99 I first saw this jig in magazine adverts about two months ago and have had a couple people ask me about the jig, but I hadn’t actually seen one until last night. I was able to procure the jig, spent last night reading the directions and checking out the General Tools Website videos, and today I tested the jig over several hours with the following results. Th...

Read this review »


Whiteside Router Bits and Woodworkersworld.net

Whiteside Router Bits and Woodworkersworld.net

06-11-2010 01:56 AM by harrywho | 19 comments »

I expect good customer service when I am trying to buy something from a company but this week I dealt with two companies that went above and beyond anything I could ask for.I was looking for a particular router bit and couldn’t find it locally and if they ordered it they told me to expect up to a two week wait. I found the bit I was looking for on Whiteside’s website but a notation in their catalog said it was not for the use I intended. I called Whiteside to find out why and was ...

Read this review »


« prev 1 2 3 4 5 6 ... 17 next »
165 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com