LumberJocks

Reviews: Router Accessories

  • Advertise with us
Whiteside Combination Compression Bit

Whiteside Combination Compression Bit

12-16-2014 11:46 PM by Greg..the Cajun Wood Artist | 15 comments »

I have a good number of router bits for different purposes that I have accumulated over the years…some good and some not so good. I have been looking at this spiral combo bit from Whiteside for a while…hoping it would go on sale…but it never seemed to…so and finally decided to buy it. I have given it a good workout before writing this review because it is not my everyday bit and isn’t cheap at $149. I’ve used it in my router table and also with a handhe...

Read this review »


A very accurate safety device.  A Must Have!

A very accurate safety device. A Must Have!

11-27-2013 02:52 AM by MHarper90 | 14 comments »

The Purpose: So I do most of my woodworking at work because we have a pretty nice shop there. In late September of this year I was routing a 1/2” deep x 2” wide flute into a piece of wood when the workpiece was shot across the room and my left hand was thrown into the router bit. After a trip to the ER and emergency hand surgery with a skin graft, I was very fortunate in that I only lost 3mm of bone and approximately 5mm of total length off of the end of my left thumb (I st...

Read this review »


Rockler Bench Cookies - Worth the Money

Rockler Bench Cookies - Worth the Money

07-27-2009 04:14 AM by Greg Wurst | 14 comments »

I see I’ve been beaten to the punch on the review, but I’ll go ahead and add my 2 cents worth here. I was at Rockler this weekend and noticed they had these in stock; so I forked-over my $12 and bought a set. As you probably know by now, these are plastic pucks with what is essentially router pad material on both sides. They grip tenaciously, and with any moderate downward pressure will hold your workpiece in place. For any large panel or heavy object these worked great....

Read this review »


The new Mortise Pal:  an exceptional upgrade to an exceptional tool

The new Mortise Pal: an exceptional upgrade to an exceptional tool

12-23-2010 05:56 AM by newTim | 14 comments »

Mortise Pal has re-designed their jig and the features are more than incremental. I’m an old fan of the MP jig having bought the first two models. I was real honored to be chosen by them to test their newest model. I started a blog about the test and now that I've been able to play around with the jig I will update it. There have been many excellent reviews of the first models posted here on LJs. For those not familiar with this tool, it is a router jig that facilitates perfectly...

Read this review »


First Blush Impressions

First Blush Impressions

10-01-2011 06:56 AM by DynaBlue | 14 comments »

Disclaimer: I’m not a professional reviewer and these opinions are mine and mine alone! Retail Price: $149.99 I first saw this jig in magazine adverts about two months ago and have had a couple people ask me about the jig, but I hadn’t actually seen one until last night. I was able to procure the jig, spent last night reading the directions and checking out the General Tools Website videos, and today I tested the jig over several hours with the following results. Th...

Read this review »


RT1000XL Router Table - Excellent Product

RT1000XL Router Table - Excellent Product

01-02-2012 10:29 AM by David Grimes | 14 comments »

I’ve had this table for almost a year, so for those of you yearning for a review where the tags aren’t still hanging, this is one of them. As you can see from my photos, I have added an MCLS Daisy Pin Router to it. The table does not come with the pin router. The only modifications I have made are adding 7” to the base to suit my height preference. I knew I was going to do this when ordered, so I told the builder to attach the wheels knowing that I would transfer them ...

Read this review »


Momentary Power Foot Switch

Momentary Power Foot Switch

01-09-2013 11:01 PM by b2rtch | 14 comments »

How many time when starting your router or your drill press or other power tool did you wish you had one more hand to grab firmly on the piece you were ready to machine? Often we present a piece of wood on the router just at right place to route it and then we need to let go of it to start the router and then the piece move. Or we hardly can hold one large piece , we do not feel very safe and then we need to let go of one hand to start the router or the drill press. After I refurbished...

Read this review »


Small Shop? Big Solution

Small Shop? Big Solution

02-25-2011 06:07 AM by sawblade1 | 13 comments »

Good evening LJ’s, Yesterday while I was at work this wonderful tool arrived at the shop :) I give it five stars because it’s a no brainier as I am looking to save space and become more efficient in my shop, the fit an finish out of the box was great, instructions was great and easy to follow,. All of the bolts, and other hardware was supplied and fit too :) Installation took about 25 minutes and required me to remove the left iron wing on my Delta table saw, but what makes thi...

Read this review »


1/2 lock miter router bit

1/2 lock miter router bit

10-19-2010 09:21 PM by Edward83 | 13 comments »

I saw this while looking through the router bits at Lowes. I never heard of of a lock miter router bit and feeling adventurous I decided to drop the thirty dollars for it in hopes of upping my abilities to build a better quality box. I read the instructions and set it up in my router table. The instructions suggest having a few pieces to practice on, and believe me they weren’t kidding. It says that you can use it on boards up to 3/4 in. but I would do it a little shy. The nature o...

Read this review »


Almost gave it one star

Almost gave it one star

12-13-2010 06:14 PM by Pdub | 13 comments »

I ordered this set back in August when Rockler had a sale goin on. I didn’t get to use it until late September. The first three bowls went good, but on bowl number four the bearing seized up and left a deep burn mark in my bowl. I was furious to say the least. It was Sunday night so I had time to cool off before calling Rockler to complain. The nice lady at Rockler said she would contact CMT and have then send me a new one. When I told her that I needed it to finish bowls for a cr...

Read this review »


« prev 1 2 3 4 5 6 ... 14 next »
132 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase