LumberJocks

Reviews: Pneumatic Nailers

  • Advertise with us
It worked good three times.....just not in a row

It worked good three times.....just not in a row

169 days ago by jakeprater | 12 comments »

I bought this back in December, and it worked great right out of the box. It has a nice fit and finish, and doesn’t feel like cheap plastic. I like the rubber handgrip. The mail tray feels a little light weight, but it functions smoothly, so no real issue there. I also bought Bostich 1 inch nails to go with it – I tried not to skimp too much. So I opened it up, put a few drops of oil in the inlet, and a couple in the oil slot on the front, and hooked it up to my comp...

Read this review »


Review: Porter Cable Pin Nailer

Review: Porter Cable Pin Nailer

2371 days ago by Peter Oxley | 11 comments »

Features (from Porter Cable Website): Uses 23 Ga. micro pin nails similar to Senco┬« models Drives nails from 1/2” to 1” long Tool automatically adjusts for different fastener lengths. Easier loading and less problems with pins out of spec Bottom load magazine holds 170 pin micro nails Dual trigger feature Nail reload indicator Rubber comfort grip on tool handle Rear exhaust port channels air and tool oil/condensation away from user Standard Equipment: Nailer, bo...

Read this review »


Best 23 Gauge Tool for the woodworking professional

Best 23 Gauge Tool for the woodworking professional

1603 days ago by Knotty | 11 comments »

I have had many nail guns over the years but I needed to share this one with you guys. This tool is from Cadex and shoots a 23 gauge brad or a 23 gauge headless pin. It has been my experience with this gun that the Brads hold much better than it’s headless counterpart, but leave no larger mark in the wood. ( I will always buy the brads now) I have used the tool on several exotic woods and it has loads of power to drive into hardwoods. This also has the coolest blow gun feature ever. ( T...

Read this review »


Who's got two thumbs and loves to staple?

Who's got two thumbs and loves to staple?

2370 days ago by gizmodyne | 10 comments »

This guy. This stapler shoots 1/2” to 1 1/2” narrow crown staples. Have you ever had to remove a freakin’ narrow crown staple. It is not coming out. Staples resist racking. I use this for reinforcing cabinets and attaching their backs. Very strong. Also it is awesome for building lattice. Brads and finish nails will pull out. Staples hold strong. (Use galvanized for outdoor.) I would definitely buy another P.C. gun. No jams. No problemo. 4 stars because how...

Read this review »


Inexpensive but surprisingly good

Inexpensive but surprisingly good

1081 days ago by pjones46 | 10 comments »

Just purchased a Numax SP123 pinner from Amazon for Under $30. I had a project to apply some fine moulding which would be split by 18 guage brads and did a seach on pinners. Did not want to spend alot as I did not know if I would ever use it again and found this one and by looking it appeared to be good value. Anyway, got it along with some 3/4” pins and it really works great so far. It will shoot 1/2’ to 1” pins and has has a setting which adjust the depth of the ma...

Read this review »



This nail gun is great!

This nail gun is great!

1505 days ago by ABrown | 9 comments »

I bought this gun to install 1500 board ft of crown. It’s light weight really helped when useing it over head. It came with two triggers one for “bump” fire and a standard trigger. Portercable has made this gun oilless, which I love. It also has a belt clip which is very handy. Overall this is an excellent gun to own.

Read this review »


Nice kit to get started.

Nice kit to get started.

1624 days ago by SchotterWoodworking | 8 comments »

I bought this kit for about $300.00 at Home Depot about two years ago. The compressor itself is a basic pancake oil-free design; simple to maintain and easy to use. The nail guns are nice and heavy with a well balanced design. The tool bag is however barely big enough to hold all three guns, so you don’t have room to carry fasteners in the bag with them. The brad nailer is 18ga. 1 1/4”, the stapler is 18ga. 1” narrow crown, and the finish nailer is 16ga. 2 1/2”. The tw...

Read this review »


Great gun for the money

Great gun for the money

1624 days ago by SchotterWoodworking | 8 comments »

I purchased this stapler after being disappointed with the 1” gun that came in my PC combo kit. It is a full range narrow crown stapler: 18ga. 1 1/2”. It has a selector on the trigger for bump-action or sequential firing which is a nice feature, as opposed to swapping out triggers. The carry handle is flimsy, but aren’t they all. The gun has never jammed and is oil-free. Compared to a gun like the Senco SKSXP that I use at work, it’s a toy; but, for less than $100.00 (...

Read this review »


First one was a dud, second one is fine.

First one was a dud, second one is fine.

1399 days ago by dbhost | 8 comments »

Mind you, pnuematic nailers are honestly very simple tools as far as air tools go. The driver is simply a piston, with a simple connecting rod sort of arrangment. You would think that if a company is going to build a product that has a piston, a connecting rod, and motion, that there would be a wrist pin right? Well not in my first one. Now #2 is working great. It leaks a tiny bit of air, but that is my fault. I took the thing apart to inspect it and managed to tear one of the paper gaskets. ...

Read this review »


« prev 1 2 3 4 next »
34 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase