LumberJocks

Reviews: Planers

  • Advertise with us
Woodfast jointer / thickness planer combination

Woodfast jointer / thickness planer combination

06-14-2011 05:02 AM by Boneski | 2 comments »

About a year ago, I decided to purchase a Woodfast 12” 3 HP 240V combination jointer / thickness planer. Most other gear available in Australia in this price range was only 10” capacity and didn’t seem to be put together very well. Woodfast is an Australian company that have been around for a long, long time. I grew up using their equipment at school and they are still major suppliers to the education department. Sadly, as is the case with a lot of companies these days, Woodfast as a company ...

Read this review »


ridgid planer very sexy

ridgid planer very sexy

05-10-2011 08:03 PM by gardentiger | 23 comments »

This planer does all that I ask it and more. Boards come out with smoothness and just a touch of love.

Read this review »


As good as any in its class

As good as any in its class

04-25-2011 03:05 AM by Tedstor | 12 comments »

So a few months ago, I decided I needed a thickness planer. Of course, having a tiny workspace meant I was limited to compact models. All my research indicated the higher end Dewalt and Ridgid planers gave the best results. That same research also indicated the lower end models were capable of reducing the thickness of a board, but snipe was basically inevitable unless you hyper-tweaked the tool and used an additional infeed/outfeed support table. I was dead-set on getting one of the better m...

Read this review »


Grizzly G0453Z

Grizzly G0453Z

04-15-2011 03:06 AM by Scott H. | 4 comments »

I purchased the Grizzly G0453 15” planer with the spiral head cutter. It works like a dream! There is some snipe on the front of the board “at times” which is to be expected. I just make sure that the board is a little longer than what I need for the finished board. The snipe isn’t that deep. Most of the time it takes only a little sanding and it disappears. It was packed very well for shipping. It was actually in a wood crate. After I unpacked it, I used one roll of paper towels and sever...

Read this review »


G0453Z Review

G0453Z Review

03-04-2011 01:12 AM by TJU | 6 comments »

It has taken me a few weeks but I have finally got my new planer and jointer all adjusted and running. I ran about 30 bf a cherry through them for a project I am working on. This is the first Grizzly purchase that I have made and I will definitely look at Grizzly when I go to upgrade my 9” crapsman band saw that I got for $35 on Craig’s list.The fit and finish we about what I expected. I took about 5 minutes to file the sharp edges and scrape a few drops of paint off the jointer fenc...

Read this review »


Replacing an old benchtop planer

Replacing an old benchtop planer

02-13-2011 08:14 PM by Ian_S | 7 comments »

I recently purchased ($1390.00) this planer from my local woodworking store Warren Cutlery in Rhinebeck New York. The planer was on display in the store, so all I had to do set up wise was bolt on the cast iron bed extensions, connect the dust collection hood and install a plug. Set up time under two hours. The adjustment screws on the bed extensions were easy to use when leveling the beds, though the screws on each end had limited room for turning the allen key. This planer appears to b...

Read this review »


Delta 22-590 13" planer

Delta 22-590 13" planer

02-11-2011 10:21 PM by ic3ss | 10 comments »

It seems this is the first LJ review of the new Delta 22-590 planer. Delta released this last summer, I believe, and I’ve only found a few reviews by people who’ve actually used the thing. Most of them on the web are just copy-and-paste of someone elses’ review. I wanted to save some money and buy a used planer, and after wasting my time and a lot of gas on a Craigslist deal-gone-bad for a used 22-580, I decided to buy new. This is the 22-590, it’s the update to the 22...

Read this review »


Byrd Shelix Cutter Head for Dewalt DW735

Byrd Shelix Cutter Head for Dewalt DW735

02-09-2011 03:07 AM by ChrisForthofer | 15 comments »

Installation: I purchased this unit about 2 weeks ago, and due to all the crazy weather back east it just finally arrived today (no reflection on the vendor). I was like a kid in a candy store, brought it inside and began taking my Dewalt apart for installation. Byrd provides pretty detailed instructions on getting the head in the planer. There could have been a slightly more detail in the instructions but if you have basic mechanical skills it will take an hour or so to accomplish the ...

Read this review »


Great Purchase - Refurbished Nonetheless

Great Purchase - Refurbished Nonetheless

01-30-2011 08:57 AM by OhioPumpGuy | 9 comments »

I bought this planer a few months ago from ToolKing.com (http://www.toolking.com/) for about $450. It has been one of the best purchases and additions to my shop. I read reviews about people having issues with dull blades, etc. I have ran a tone of wood from pine to oak to maple through this planer and the factory blades are perfect. The key is not running too much wood at once. The only issue that I have had is that the rollers need to be cleaned every so often and the feed plate should...

Read this review »


Out of the box, I'm thrilled

Out of the box, I'm thrilled

01-30-2011 04:42 AM by Todd Clare | 13 comments »

When I began pondering the purchase of a thickness planer, I researched Fine Woodworking and saw that the DEwalt 735 was rated the best. My plans were to purchase this model when I decided it was time. As many of you likely read, I was drawn in by the helical head Steel City, and had some issues with it out of the box. As I said in that review, maybe I got a one-off lemon, but nonetheless, I wasn’t that impressed. Fortunately Chris from Highland Woodworking, where I ordered the ...

Read this review »


« prev 1 2 3 4 5 6 7 8 next »
78 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase