LumberJocks

Reviews: Grinders

  • Advertise with us
Incredible Quality made in USA

Incredible Quality made in USA

11-08-2012 01:00 AM by JuniorJoiner | 21 comments »

Vintage Grinder-hand powered. If you do much sharpening, you know how valuable a hollow ground tool is. Using a low speed grinder is a way to grind your tool safely without losing the steel’s temper. Also, it is easier to grind accurately at low speed.Anyone who has attended inside passage school of fine cabinetmaking knows about hand crank grinders, and how wonderful it is to have a hollow ground blade to sharpen.the problem has always been finding a good quality grinder, as the han...

Read this review »


Ordered one yesterday

Ordered one yesterday

08-16-2011 10:25 AM by RHytonen | 0 comments »

http://www.ereplacementparts.com/porter-cable-pc750ag-type-amp-small-angle-grinder-parts-c-129_1811_16568.html (wondering if the bearing shouldn’t just be lubed or replaced) I had a Ryobi 5 amp last me about six or seven years. I do sporadic fabrication, welding and kart restoration; and use it heavily when I do, but then not for months or even years in between. The Ryobi (HmDepot, $40) blew up yesterday, blasted a pinhole in the case w/ a tiny fire blowing thru (burnt winding.) ...

Read this review »


Porter-Cable PCB575BG Bench Grinder: a good value

Porter-Cable PCB575BG Bench Grinder: a good value

01-05-2011 02:56 AM by Mark Colan | 13 comments »

I have been using a washing machine motor with a grinding wheel attached to its one axle – without any kind of guards or grinding stands. Power wires attached by screw terminals that are exposed. The whole thing mounted to a board. It worked well enough, but I decided that as safety features go, this one was a dinosaur. I decided to find a bench grinder that I won’t have to replace later. Variable speed, 8” wheels, 3/4 HP or better were key features. My usual shopp...

Read this review »


Great product, excellent company.

Great product, excellent company.

12-07-2010 09:58 PM by dbhost | 14 comments »

Now you guys and gals know me, I am a bang for the buck kind of guy, and in order to separate my cheap fingers from those bucks, your product or service better offer some real tangible additional bang… Enter the OneWay Manufacturing Wolverine jig. I initially got this because I had no idea that PSI had a cheaper clone, and after a couple of frustrating plywood copies later, I opted for the steel of the Wolverine to avoid the flexing that was messing up my angles. To call the Wolve...

Read this review »


Excellent grinder for the money.

Excellent grinder for the money.

09-16-2010 06:36 PM by dbhost | 13 comments »

When I had decided on the Wolverine jig system for my tool sharpening needs, I more or less knew I needed an 8” grinder as the wheels on my 6” were pretty narrow… Upon reviewing the recommended grinder speed on the owners manual of the Wolverine Jig System (Page 1, lower right hand corner), and seeing that THEY recommended an 8” 3450 rpm grinder, I decided to do a little digging on what grinders I wanted. I see a LOT of folks going with the multi speed, and slow speed ...

Read this review »


Grizzly 6" low-speed grinder (Shop Fox)

Grizzly 6" low-speed grinder (Shop Fox)

06-25-2010 01:29 AM by glassyeyes | 10 comments »

This item is currently on sale at Grizzly for $49.99 plus shipping, listed at about $110. It runs at 1725 rpm, and the motor is rated as 1/4 hp, totally enclosed and fan-cooled. It ran quite smoothly right out of the box. The left wheel is 3/4” wide, and coarse grit. The right wheel is 1 1/2” wide, and is white aluminum oxide medium grit. I did the rough grinding on several chisels with the wider wheel, and was very pleased. A number of my chisels and plane irons are in need ...

Read this review »


Grinding wheel dresser

Grinding wheel dresser

05-13-2010 03:21 AM by hairy | 11 comments »

Did you ever do something dumb, then follow up with something stupid? OK, I’m the only one. Anyway,I wore a big groove down the center of my grinder that I sharpen lathe tools on. Then I went to Sears and got this. This is a good idea, it just doesn’t do a good job. The wheel I was dressing is 120 grit aluminum oxide. I assumed this would be a harder material. I quickly wore this out and still had a groove. The instructions did say the plastic would wear down as you use it. Th...

Read this review »


THe Festool RAS 115 is a Wood Sculptor's Dream

THe Festool RAS 115 is a Wood Sculptor's Dream

03-08-2010 06:49 PM by Charles Brock | 7 comments »

Several years ago at the Festool IWF booth, I told one of the reps what type of work I do and he said you got to try the “Termite Tool!” Full of woodworker’s cynicism , I thought, Yeah! Just another grinder. I didn’t try it, so I continued to shape my rocking chair seats using a grinder with a carbide wheel attachment while turning my shop’s air into a dusty haze. My only alternative was to go outside on a windy day and let my neighbor deal with the dust. As usua...

Read this review »


Oneway Wheel Balancing System

Oneway Wheel Balancing System

03-03-2010 11:18 PM by Padre | 7 comments »

I bought this Oneway Wheel Balancing System from Craft Supplies, it cost 62.99. I do a lot of wood turning tool sharpening. I have an inexpensive 2 speed grinder I bought from Woodcraft and it rocked, rattled and rolled, that’s for sure!! I put this on this afternoon, and you would think I have a Baldor grinder with special balanced wheels. What a difference this has made. I recommend this grinder attachment.

Read this review »


I Can't Imagine It Gets Much Better Than This

I Can't Imagine It Gets Much Better Than This

12-26-2009 09:19 PM by Jimi_C | 34 comments »

I have been wanting to get a wet grinder for a while now, after watching the Woodwhisperer and MLW videos on sharpening with them (TWW used the Jet, Tommy used the Tormek). Both of those machines were way out of my budget (especially the Tormek), so I was going to resign myself to scary sharp until I found the Grizzly T10010. Unfortunately, there are extremely few reviews of it around the net, so I was unsure of whether to get it or not. Well, Grizzly is having their holiday sale right now...

Read this review »


« prev 1 2 3 next »
23 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase