LumberJocks

Reviews: Gluing and Finishing Supplies

  • Advertise with us
My Critter Spray gun

My Critter Spray gun

07-08-2009 07:07 AM by duasbata | 12 comments »

Hi Guys. I don’t know if I’m doing this right or not. There was a previous review of this gun and I just wanted to give my review as well.Came across Woodgal’s entry about the Critter so I read more reviews from Amazon. Got my Critter Sprayer from Amazon for $33.81 free tax/shipping.Got 12 regular mouth Ball mason jars from our local Stater Bros. supermarket for around $10.Filled 1 with blue tinted water (used food coloring) just for practice, 1 with clear water for cleani...

Read this review »


Household product that removes CA Glue residue…and the Dan & Odie Show

Household product that removes CA Glue residue…and the Dan & Odie Show

05-09-2009 11:52 PM by Douglas Bordner | 113 comments »

Calico Polish Off Artifical Nail and Polish Remover. Excellent and effective product for removing CA glue build up from fingers. I haven’t had the need (knock wood) to separate my fingers from themselves or a workpiece using this product, so I do buy the Super Solvent that is a shelfmate of the other Hot Stuff Cyanoacylate glues I use. However after fiddling with some inlay banding today, I developed a thin coat of CA on the fingers. At $2.99 the Polish Off (with Acetone) is significant...

Read this review »


LOCKTITE Power Grab adhesive, great stuff!

LOCKTITE Power Grab adhesive, great stuff!

05-04-2009 07:08 AM by TopamaxSurvivor | 9 comments »

I used Locktite Power Grab to install some cleats to support some shelves in our 5th wheel. The surfaces were fairly slick, so I roughed them up a bit with 50 grit sandpaper. I tried this adhesive because the cabinets are fairly deep and narrow, It would be quite difficult to reach in to position,, hold and attach the cleats with screws. I intended to get the cleats placed and use screws later. The product holds so well, I cannot break it loose after a day and a half. The only failure w...

Read this review »


Made the switch

Made the switch

04-02-2009 06:43 AM by bayspt | 18 comments »

After using almost a whole tub (1lb) of SC Johnson paste wax in the last year or so, I caught Renaissance wax on sale at Woodcraft this month and reluctantly bought a can. I say reluctantly since the street price of this stuff is 26 bucks for 200ml or 7 fl. OZ. Little can for 26 or big ole pounder for 8. Ability to buy at Borg or local department store (blue, biggest in the world) or have to buy at specialty shops or order online. You can see my apprehension. But after the rave reviews b...

Read this review »


LOCKTITE POWER GRAB REALLY SUCKED .... * WORST ADHESIVE ON PLANET EARTH*

LOCKTITE POWER GRAB REALLY SUCKED .... * WORST ADHESIVE ON PLANET EARTH*

03-31-2009 01:31 AM by Dan'um Style | 27 comments »

LOCKTITE POWER GRAB is crap. I glued and clamped six large landscape tiles to a plywood board with Power Grab thinking it would be an improvement over my normal method of Gorilla Glue (sometimes a little messy). NOT I HAVE NEVER in all my years used anything that worked so poorly. REALLY REALLY BAD. Last night I applied 3/4 a tube to fasten my tiles to a plywood backer board. I lightly clamped the tiles with spring clamps and let it setup OVERNIGHT ... (over 20hours). Came home...

Read this review »


Works well thus far

Works well thus far

02-26-2009 11:39 PM by Will Mego | 4 comments »

With the intention of using it to spray glue down pieces of sandpaper for the Scary Sharp sharpening method, I bought this at my local Ace Hardware, large can was about $12 or so. I’ve only used it a couple of times, but thus far it works well, giving me paper glued onto 1/2” plate glass strongly enough to work chisels on it, but it pops off easily when I want to remove the paper. I just spray a tiny amount on the back of the paper, and stick it down, let it set for a few seconds....

Read this review »


K-Grip Siphon Spray Gun aka Critter Spray Gun

K-Grip Siphon Spray Gun aka Critter Spray Gun

12-19-2008 04:47 AM by Matt (Upper Cut) | 11 comments »

This is a review of the following http://www.rockler.com/product.cfm?page=17858&filter=critter%20spray I have had this for a while, and it was $40 when I bought it, it’s $50 now. I primarily use this for spraying interior latex paint on furniture. This gun has a bad rep, but I like it. Yes, it makes a cloud—wear lung protection. I mix the paint with water, pop it on the compressor, set it to 40psi (I have a little pancake compressor) and spray small projects. I ...

Read this review »


What a mess!!

What a mess!!

12-06-2008 06:00 PM by TraumaJacques | 31 comments »

It as gotten cold here in the great white north (Toronto Canada). I still am able to work in my non insulated shop but it is hard to keep it above 15 C for optimal gluing condition. I read that Gorilla glue as a much better tolerance for cold and since what I was working on was purely decorative and had no structural function I decided to try it. First I was shocked by the price 12.99 for a rather small bottle. Then I read the instruction which suggested wetting the surfaces before applying ...

Read this review »


Amazing Product

Amazing Product

12-05-2008 06:55 PM by Bob42 | 1 comment »

I checked this out after reading mjon’s review on this. I always liked using bees’s wax paste but was willing to try the spray. So, I looked on the internet and found it. The Original Bee’s Wax. Well let me tell you I cleaned my kitchen cabinets and then waxed with the Bee’s wax and they came out great, but, the best part of this product is when you use it on glass and granite or marble tops. Last year I renovated our bathroom and put in shower doors but the glass gets...

Read this review »


The Beall Wood Buff

The Beall Wood Buff

11-22-2008 03:49 PM by odie | 24 comments »

Every time I make a ring box I use The Beall Wood Buff. I make about 300 ring boxes a year in four different sizes. Since I have had my wood buffing system (approx. 18 months) I’ve probably used it on close to 500 boxes. I used to hand wax and buff these boxes and it would take forever. Now it takes half the time and the quality of finish is second to none. The procedure I use is quite simple. I now sand my boxes on a belt sander down to a 400 grit. Then I apply one coat of tung oil and le...

Read this review »


« prev 1 ... 8 9 10 11 12 next »
118 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com