LumberJocks

Reviews: Drill-Driver Accessories

  • Advertise with us
My prize, Summer 2008 Contest

My prize, Summer 2008 Contest

2140 days ago by Karson | 13 comments »

I won 2nd place in the LumberJock 2008 One Man’s Junk Contest. I won a Jack Rabbit Deluxe bit driver set. It arrived today and it looks great. It came in a blister pack package and it contained 4 drill bit sizes 7/64, 1/8, 9/64 and 3/32 drill bits. The countersink is 3/8 in the three lower sizes and 1/2 in the larger drill bit. It has a brass covered magnet that is quite strong. It held the wrench that is used to screw in the drill countersink assembly. The drill assembl...

Read this review »


Combination Hex Drill\Tap Bits: Easy Installation of Threaded Knobs and Rod

Combination Hex Drill\Tap Bits: Easy Installation of Threaded Knobs and Rod

349 days ago by DeLayne Peck | 13 comments »

Maybe I just fell off the lumber truck, but I didn’t know about combination hex drill\tap bits. You don’t have to install a brass insert! Or, drill and then tap threads?! Do it all in one easy operation! Directly into wood with a low voltage driver!! I have threaded a lot of brass inserts for the jigs I’ve built, like my Rip Snorter Push Block , and thought they were a pain. And, I have read about and used various methods for installing inserts. They work, but they a...

Read this review »


Nice job but it takes time

Nice job but it takes time

1112 days ago by RexMcKinnon | 12 comments »

I bought this product because I thought it would improve the look of the pool deck I am building and although I am not finished yet I think it has. The whole purpose of the jig is too allow the user to screw down decking without showing the screw and that’s exactly what it did. My decking is made from 5/4 pressure treated boards. There are 10 joists each spaced 16 on centers and there are 2 screws per joist which gives 20 screws per board. To boards feel as if the are held down well. I ...

Read this review »


Outstanding countersink/bit combination

Outstanding countersink/bit combination

525 days ago by Rick M. | 12 comments »

Over the years I’ve tried a number of countersink + drill bit brands, most use a replaceable bit but they are all pretty mediocre and few lasted a year. I’ve owned this Dewalt set for several years and they still perform like the first day I brought them home. Some folks believe combination bits are gimmicky, preferring to use separate products but these might change their mind. Not only do the countersinks perform flawlessly, the tapered bits are exceptional and probably the best...

Read this review »


Right on the Mark

Right on the Mark

526 days ago by clieb91 | 11 comments »

As some of you know I make a lot of peg games and one of the things I hate the most about making them is having to clean up the drill holes. Well I have found the solution to that problem. MicroMark Double Land Brad Point Drill Bit. I found these in a catalog for model building that my grandfather had given me and they claimed to make the a clean cut hole in all woods. My games are mainly made with standard pine and I was a bit skeptical but at around $19 for a set (see pic 1) I figured it...

Read this review »


Exceptionally smooth countersinks

Exceptionally smooth countersinks

1761 days ago by sry | 10 comments »

Woodcraft product page I had always heard that this style produces a very smooth cut, so I decided to pick some up when I was at Woodcraft. I bought the #6, #8, and #10. It really is amazing how smoothly and effortlessly they cut. The second picture I uploaded shows just how smooth these things cut (#10 is shown, but the results are typical). On the far left is the Wood River single flute countersink, middle is one from HD (can’t remember the brand), and right is from a Ryobi c...

Read this review »


MT2 Drill Chuck

MT2 Drill Chuck

1234 days ago by ChunkyC | 10 comments »

Harbor Freight 1/2in MT2 Mini-Lathe Drill Chuck I purchased one of these last week based on a posting from LJ member Hairy. I paid $14.99 + shipping which is a good price for drill chucks with the arbor! A high precision chuck it’s not and this chuck isn’t going to win any contests for the best chuck of the year but it does make a good chuck for woodworking. The chuck that I had for my DP wouldn’t chuck up smaller bits so I needed to do something. I’ve been lo...

Read this review »


The Shelf Pin Jig From Kreg Tool.

The Shelf Pin Jig From Kreg Tool.

867 days ago by SCABrown | 10 comments »

Today I will be reviewing the Shelf Pin Jig from the folks at Kreg Tool Company. The Jig retails for $34.99 at Woodcraft. I also picked up the optional 5mm drill bit it is retailing for $7.99. So whats in the box? The kit includes; the jig of course, a locating pin, the jig extender, a 1/4” drill bit and depth collar, an allen wrench for the depth collar, the instruction manual, and mine had a bag with 3-1/4” shelf pins in it. There is really not any assembly required for the jig...

Read this review »


Good jig but the whole package could use a little polish. Also can be used as a doweling jig.

Good jig but the whole package could use a little polish. Also can be used as a doweling jig.

437 days ago by Rob | 10 comments »

I bought the Kreg Shelf Pin Jig not to drill evenly-spaced holes for shelf pins (though I do also plan to use it for that later), but rather as a jig to accurately drill holes for dowels. First I cut a shim to go between the alignment fence and the piece of wood that needed dowel holes. I clamped the shelf pin jig in place, drilled a couple holes, then moved it over and used the included alignment pin to set up the next hole to be drilled. If you want to use this as a doweling jig, you ...

Read this review »


 Flexible and accurate dowel work.

Flexible and accurate dowel work.

525 days ago by vipond33 | 10 comments »

I’m quite enamored of dowels as joinery, especially in cabinet construction. Fast, accurate and plenty strong enough if used with good technique, tooling and materials, they also allow me flexibility in appearance of the finished case without too much fuss. However, I do not own a doweling jig. Don’t get me wrong, I’d love to have a Dowel Max, but with all its accessories to be more costly than the price of a used motorcycle, well, no thanks. Besides, all doweling jigs ar...

Read this review »


« prev 1 2 3 4 5 6 next »
59 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase