LumberJocks

Reviews: Bandsaw Accessories

  • Advertise with us
Grizzly H3051 Riser Block Kit (for G0555) but also fits Ridgid BS1400

Grizzly H3051 Riser Block Kit (for G0555) but also fits Ridgid BS1400

09-17-2011 01:00 PM by David Grimes | 19 comments »

I recently purchased and assembled a Ridgid 14” floor model bandsaw (the BS1400). I had also ordered and received the 6” riser kit from Grizzly that is made for their G0555 14” bandsaw, but also fits several of the other 14” bandsaws: Ridgid, Craftsman, Cummins, Summit, and others. It ran about $80 shipped, which is half what the Ridgid kit costs (if you can get one). This kit is rated 5 stars by 19 of 22 reviewers on Amazon, with the other three 4’s and 3...

Read this review »


I love this blade!

I love this blade!

06-23-2009 04:12 AM by teenagewoodworker | 18 comments »

In my shop i like things to match. bookmatched especially. and one of my favorite things in the world is projects from all one slab of wood. so naturally i do ALOT a resawing. so for that i need a good resaw blade. This blade really fulfills my need too! I have a 14” bandsaw with the riser block so for resawing i got for the 105” 3 tpi by 3/4” blade. these blades have hook teeth which is very aggressive but also leaves a pretty nice finish. not glue ready by any means but go...

Read this review »


Believe The Hype!

Believe The Hype!

09-10-2010 04:39 PM by Ryan Brown | 17 comments »

The Wood Slicer bandsaw blades from Highland Woodworking are awesome. When I first purchased my “Rikon 14 deluxe bandsaw my local Woodcraft store said that the 1/2” blade that came with it was pretty good. I took their advice on that, and also purchased a 3/4” 3TPI Timber Wolf blade for resawing. Both seemed to work, but my results were so-so. For the first real challenge I resawed some green cherry logs for turning blanks. I started with the blade that came with the saw. Meh. It really...

Read this review »


Good resaw blade

Good resaw blade

09-24-2009 05:09 AM by Sawdust2 | 17 comments »

My Highland Woodworking Woodslicer got dulled up really bad because I did not pay attention when I put it on the Jet bandsaw. I was using a 3/4” and it was really too big for a 14” bandsaw. I ended up running it against the blade guard and just beat the crap out of the teeth. My bad. Markrules is a fellow LJ and reps Morse blades. He suggested that I try their 4 TPI 1/2” blade.Well, when I unfurled the blade one of the teeth caught my thumb. I can tell you that the teeth ...

Read this review »


Driftmaster Fence on Grizzly 17" Bandsaw

Driftmaster Fence on Grizzly 17" Bandsaw

05-31-2011 03:54 AM by bill4123 | 17 comments »

I just finished installing my Laguna Tools Driftmaster Fence on my Grizzly 17” Extreme Series bandsaw. I have only used it briefly to test it but I felt compelled to let everyone know about my negative feedback up to this point. I had a smooth transaction from Rockler and the shipping was prompt. The fence itself though was shipped as it came from the manufacturer and it is very much in-line with Laguna’s reputation…it arrived damaged. It was not damaged enough to effe...

Read this review »


Resaw king bandsaw blade

Resaw king bandsaw blade

10-29-2017 12:48 AM by Woodmaster1 | 17 comments »

I have been looking for a great resaw blade for my Rikon 14” deluxe bandsaw for a couple of years. I have used he woodslicer blade with some success but it gets dull and it doesn’t do a good job. I seen adds on the resaw king so I thought I would give it a try. The cost is 149.00 but after using it money well spent. The cut you get plus the ease it cuts all I can say is WOW! This is the best resaw blade I have ever used bar none. The fact that it has carbide makes for a great cut ...

Read this review »


Just Get This One

Just Get This One

08-07-2008 09:20 PM by Iffy | 16 comments »

When I first got my Grizzly bandsaw, I was pretty disappointed with the results with the blade provided. I always knew I needed to get a better one and I was hesitant to use the tool because the experience wasn’t very nice. For an upcoming project, I decided now was the time to get a new blade. I checked the reviews here on lumberjocks and finewoodworking.com and decided to get this blade. It arrived today and after spending a few minutes getting it installed I was ready for a test c...

Read this review »


Craftsman Bandsaw Fence - good bang for the buck

Craftsman Bandsaw Fence - good bang for the buck

06-07-2010 12:09 AM by Jeison | 16 comments »

I spotted this while wandering through Sears the other day, and since my little 10” benchtop bandsaw doesn’t have a fence, and I plan picking up the Porter Cable 14” that Lowes has (which I know does not come with a fence) I figured for $40, this universal fence (which boldly claims to fit all models of bandsaws) would be a good investment (Being a hobbyist and “weekend woodworker” I don’t need the hyper-accuracy and features of one of the $150+ models̷...

Read this review »


Lenox Bandsaw blade

Lenox Bandsaw blade

01-27-2008 12:34 AM by Tony | 15 comments »

Up until recently I have been using standard Band saw blade without much success, I tend to cut and re-saw a lot of white oak upto 12” in width. It was recomended to try the Lenox Tri-maste carbide tiped blade. It is a little expensive at about $140 for a 3/4” 3TPI x 136”, but boy was it worth it, I have just used it today, for all kinds of cuts on white Oak, including a 12” resaw of a board 8’ long, it was like a hot knife through butter – with vitually...

Read this review »


Carter Stablizer

Carter Stablizer

01-23-2010 10:48 PM by blackcherry | 15 comments »

Turn you band saw into a scroll saw in a matter of minutes. The Carter Stablizer works with blades 1/4 ” and smaller only! You will also have to push the lower guide bearing back as far as they will go. The stabilzer wheel has a grove set so that the blade ride into it during sawing. This allow the blade to turn with no residence. The user has a very free flowing sense of control. When making tight turn the wood will absorb any heat caused by cutting leaving the blade cool to th...

Read this review »


« prev 1 2 3 4 5 6 next »
59 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com