LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Moffatt Task Lamp for Laguna 1412

Moffatt Task Lamp for Laguna 1412

10-17-2014 04:15 AM by smitty22 | 8 comments »

Moffatt 95050 Task Lamp, Incandescent/Halogen Lamp Type, Direct Mount Base Type, 24” Arm Length, 100 Watts, 1690 Raw Lumens. About $52 on Amazon. Here’s the Moffat task light mounted on the Laguna 1412 bandsaw, really works well. It’s very heavy duty, has a nice toggle on/off switch, takes a standard base 110v bulb, and made in USA. I used a Phillips 60-watt halogen flood bulb, nice ‘warm’ light which is kind to my old eyes! Best of all, it’s almost infinitely positionable to where ...

Read this review »


Re-sawing is a breeze

Re-sawing is a breeze

02-12-2014 01:35 AM by CharlesA | 15 comments »

I’ve been frustrated resawing on my bandsaw. I have a Craftsman (Rikon) 12” that serves me well. I thought I’d just use my Olson 1/2” 3 tpi skip blade, but my results were really frustrating to me. The cut was rough and labored. I did a little research and realized I had some technique problems, but the cut still was not acceptable to me. So I decided I’d try the famous Highland Woodworking Wood Slicer 1/2” resaw blade. I am stunned at how easily it ...

Read this review »


Carter Rikon 14" Deluxe Micro Adjust Guide Conversion Kit

Carter Rikon 14" Deluxe Micro Adjust Guide Conversion Kit

02-07-2014 04:35 PM by Jeff_in_KCMO | 9 comments »

I’ve been living with my Rikon 14” Deluxe bandsaw since I purchased it about a year ago. I’ve resawn a handful of lumber, cut out some cabriole legs, made jigs… a fairly rounded work history. It’s been okay, but I felt like the blade never really tracked properly even after a lengthy and tedious tuneup. Then, I decided to make the plunge and purchase a set of Carter Micro Adjust guide bearings… POW! I just won at life. Yes they are expensive, and, ye...

Read this review »


First Re-Saw with this blade

First Re-Saw with this blade

07-23-2013 12:42 AM by Adam | 7 comments »

I had purchased a 1 hp King bandsaw for $80 off Kijiji (Canada’s Craig List) and gage it a complete overhaul and added a 6” riser kit to it. I purchased a Little Ripper Bandsaw blade for $36 from R&D Bandsaws are located in Brampton, Ontario, just 30 min from me. This is my first real experience re-sawing anything substantial with it and it worked very well. This is 12” of hard maple and the surface finish is not the best but that is because I kept on stopping a sta...

Read this review »


This blade changed how I feel about my bandsaw.

This blade changed how I feel about my bandsaw.

07-03-2013 09:16 PM by jeffwedekind | 10 comments »

Like many of us woodworkers, I had a love hate relationship with my bandsaw. I bought a Jet 14 inch saw many years ago and quickly installed a riser block on it. I made the huge mistake of using the blade that came with it , as well as assuming the index pins on the block were set properly. After struggling with this setup for many years, I did some research and concluded I needed to tune this beast up. I did the whole co-planar thing(including filing the pins on the block to make that ...

Read this review »


Woodslicer Resawing Blade

Woodslicer Resawing Blade

03-27-2013 05:07 AM by lew | 14 comments »

Buy it! You won’t regret it!

Read this review »


Turn short thick logs into useful lumber at home

Turn short thick logs into useful lumber at home

03-15-2013 03:45 PM by Elizabeth | 11 comments »

I have been eying this bandsaw log mill for a couple of years now, and decided to use some Christmas money to finally get one. I got to play with it over the last couple of evenings, working with a piece of maple that I got off of Craigslist last year for free. It was green when I got it but has been drying in my shop and is now at about 12% moisture. Assembly of the mill is pretty straightforward. It’s HEAVY so make sure you have a large clear spot on your work surface. The most...

Read this review »


Custom made sanding belts for the band saw

Custom made sanding belts for the band saw

02-28-2013 07:51 PM by PatrickB | 4 comments »

I ordered these a week ago and love them. You can order them any length with many widths to choose from. I ordered 3 ea. in 1/4”, 3/8”, & 1/2” in varying grits and they are the cats meow. The only down side was it took a while for them to arrive, about two weeks. Remove the bearing guides and set the tension and away you go. I’ve used them on end grain, curves, tight areas, they fit just about any where. The main thing is have one of those sanding belt belt cleaner...

Read this review »


Carter MagFence II

Carter MagFence II

01-16-2013 08:21 PM by BigDawg | 8 comments »

My 14” Rikon band saw is dedicated to re-sawing and other straight cuts. I was not happy with the original fence and I purchased this Carter magnet-based fence. I’ve worked with it for some and now I offer a review with both the positives and the negatives in my opinion. As expected, the quality and the workmanship are outstanding. This tool is well made. The fence is held very securely with the 2 included 30mm MagSwitches. There are 4 places to hold the MagSwitches, so you can adjust it t...

Read this review »


Great Bandsaw Blade

Great Bandsaw Blade

01-05-2013 05:05 AM by NormG | 8 comments »

After Reading MBS’ review I ordered the same blade. It arrived today while I was at work. Very well packaged and in good shape. After dinner, I went out to the shop and installed on my newer Craftsman 12” 89 1/2” blade (Similar to the Rikon). It is a great saw. After about 15 minutes of setup it was ready to go. Blade is noticeably quieter than the Timber Wolf blades I have been using. I followed the instructions and used a slower rate to break the blade in. The I ...

Read this review »


1 2 3 4 5 next »
49 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase