LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Big improvement ends being PURE GARBAGE!!!

Big improvement ends being PURE GARBAGE!!!

04-22-2011 06:52 PM by Severiano | 41 comments »

I’ve purchased this saw ‘cause I owned the past model. It was supposed to be a big improvement. Surprise!!!, the main table was broken at the back, right where the Allen screw holds the saw’s main axle!!!. I’ve sent it to the service center and they kindly replaced the table at no cost…’cause the saw was under warranty still. I’ve seen the saw had a problem. It wouldn’t stay vertical, I mean it wasn’t cross cutting vertical, there was at l...

Read this review »


Gone

Gone

10-29-2013 12:59 PM by Blackie_ | 41 comments »

Gone

Read this review »


AWESOME TABLESAW (WITH VIDEO)

AWESOME TABLESAW (WITH VIDEO)

03-23-2008 06:31 AM by Woodshopfreak | 41 comments »

This is a great tablesaw in every respect. For the full review please watch the video below, but for the gist. This tablesaw has some great features and some pro’s and con’s Features:Cool blade guardCool blade bevel/ blade hight adjustmentexpandable wings to 30 inchesoutfeed supportcolapsable standdust bagportablelots of storage Pro’s:LightweightEasy to useNice FenceGreat Storage featuresEasy to change bladesGood power for it’s size Con’s:Light weight (I...

Read this review »


Great saw, but not for the money

Great saw, but not for the money

04-18-2013 01:21 AM by Cole Tallerman | 41 comments »

So let me start off by saying this review is based on 6 months of hobbyist work and comparing to other saws on the market. Last summer, I had an accident with an old .113 table saw. My parents would not let me use another table saw unless I got a SawStop. So being 16 (not much of a budget) i went with the cheapest one; the contractor saw with 30” rails. (I ended up upgrading to cast iron wings). The good: The saw came perfectly aligned and packed beautifully with great directions....

Read this review »


A great forstner bit set from a big box store

A great forstner bit set from a big box store

07-04-2012 02:39 AM by bobasaurus | 41 comments »

I made a trip to Lowes and bought this 14-piece forstner bit set . I needed the larger sized bits for a project I’m working on, so I just bought the entire set to prevent future bit hunting. I also have a small Rockler 8-piece forstner set and a Rockler power bore bit set to compare with. These Porter Cable bits are much better than the Rockler forstners at removing chips due to the wide flutes that extend to the top (power bore bits are still the best at chip removal, though), so I ...

Read this review »


Harbor Freight / Central Machinery Oscillating Spindle Sander

Harbor Freight / Central Machinery Oscillating Spindle Sander

04-19-2010 04:50 AM by FJPetruso | 41 comments »

I recently purchased a new Oscillating Spindle Sander for my small woodworking shop. Before making the purchase I checked out comparable models, The Harbor Freight Oscillating Spindle Sander & the Triton Oscillating Spindle Sander. For the type of use that I give a power tool this quality sander would work well. With the exception of the colors being reversed, the two machines are identicle. Both sanders have the same features & acessories. Naturally at $90 for the Harbor freight m...

Read this review »


I wanted to really like this saw but dont

I wanted to really like this saw but dont

01-18-2017 03:07 AM by edwood1975 | 41 comments »

Hi Folks, So I have this saw for well over a year and have used it a lot and is supposed to be my go to tool in the workshop but sadly im not loving it… What I like:Its powerful enough for softwoodsIts very quietI love the castor mobile base that is attached. What I don’t like1. The fence guides suck .. the rail that guides the fence is forever out of alignment at least every month I have going underneath the front rail and tightening the nuts. I don’t like that the...

Read this review »


The Full Potential of the R4512

The Full Potential of the R4512

06-24-2013 10:29 PM by aatwatch | 41 comments »

I have an R4512 with a MLCS cast-iron router table extension, Incra 32” TS-LS fence system, Incra 1000HD miter guage and 48 tooth WWII blade. I love this saw and have no complaints other than being underpowered at times. However, once everything is properly calibrated I would argue that this setup could perform as well as any comparable duty saws and it has made me very happy to own. The MLCS cast-iron extension bolted up easily with the supplied hardware. The middle bolt was tric...

Read this review »


$74.95 Piece of crap

$74.95 Piece of crap

05-25-2010 08:02 PM by sawblade1 | 41 comments »

Fellow lumberjocks I hate to post a bad review but this dovetail jig has taken the last of my Patience that I allocated for it :( I bought this last year after realizing I need a jig, well I am fed up with trying to fix an almost new jig after reading the instruction manual and setting it up accordingly I placed the wood in the holder and tightened the clamp and after 3 seconds SNAP!!!! the knobs and bushing holders were broke after calling grizzly and getting a new bag of knobs and nylon b...

Read this review »


LJ's Website

LJ's Website

02-05-2014 04:57 PM by DaddyZ | 41 comments »

Anyone Else noticed how LJ’s seems to be running a bit smoother the past few days ?? Good Job LJ’s, I appreciate it, Thank You !!!!!!

Read this review »


« prev 1 ... 6 7 8 9 10 11 12 ... 462 next »
4617 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com