LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Vega Pro 50 Fence - Long winded

Vega Pro 50 Fence - Long winded

08-14-2015 12:30 AM by Kurt T. Kneller | 7 comments »

I needed to increase the cutting capacity of my table saw and last fall I bought a Vega Pro 50 fence system. I originally wanted to get a Biesemeyer, but I really need both my legs and both my arms. My table saw is a Rigid 2424. I wanted to use the fence for a while before writing a review. I have put it through the paces and the following is my take on the fence. Aftermarket fences can be really expensive and may require a good amount of modifications to your table saw. That was not ...

Read this review »


The DeWalt DWP611PK 1.25 HP Max Torque Variable Speed Compact Router

The DeWalt DWP611PK 1.25 HP Max Torque Variable Speed Compact Router

02-07-2011 05:03 AM by plantek | 7 comments »

Well by now I’m sure you’ve many things about this router. Probably more good than bad. I can say without reservation all the good things are true.I bought it about a week ago (mail order) but have been sick and haven’t had a chance to use it until this weekend.The project I cut it’s teeth on is a white oak sofa table. So far I have only done round overs, slot cutting and running a trim bit. It has performed flawlessly! The variable speed is easily adjusted on the fly....

Read this review »


Wixey Saw Fence Digital Readout  - Installation review

Wixey Saw Fence Digital Readout - Installation review

02-18-2008 06:03 AM by sIKE | 7 comments »

I have really been wanting one of these and I got it for my birthday yesterday. Was excited and got out late this morning and got started on the install. The first picture shows everything that came in the box. Well almost everything, it was missing one of the sensor strips. So my simple two hour install telescoped out within the first 20 minutes. So after an 1:30 minute round trip to Woodcraft to exchange it out. I was able start the install again. Assembly is simple and straight forward, th...

Read this review »


The new dovetail saw by Roeland Brekelman from Brekelplanes

The new dovetail saw by Roeland Brekelman from Brekelplanes

06-29-2013 03:26 PM by rkoorman | 7 comments »

Today I finally got the chance to try out Roeland his new made dovetail-saw…..What an amazing piece !!! Besides custom-made planes Roeland also builds saw and other tools. This saw is build totally by hand. This saw is priced at 120 euro’s…I think that is great value for money. You can find his planes on facebook ” Brekelplanes “

Read this review »


Review Feedback

Review Feedback

10-25-2011 04:05 PM by burt | 7 comments »

This is a note to DynaBlue from the inventor: I read your review of the General Tools Mortise and Tenon Jig and wish to thank you for your expert review and analysis. If possible, I would like to be able to call DB and speak to him privately on some of the details, if you would please give me a way to call him.I am particularly interested because I am the inventor and patent holder of this tool, so I want you to know that your criticism is completely fair and accurate and, as the designer, bu...

Read this review »


My new favorite toy.

My new favorite toy.

08-23-2009 03:58 PM by Andrew | 7 comments »

Hey Everyone, Just got My Jet 1642 EVS pro 1 1/2 hp. Awesome. I will tell you the set up was easy, 1/2 hour at most, needed an extra set of hands to balance the legs while attatching the Way to them. Thank You Dann. It was my own fault, if I had read the directions I would have noticed that they will balace on their own if you do not attatch the feet first. In otherwords, Put it together first then lift the whole thing up and install the feet. Everything goes together very nicely. Fit ...

Read this review »


For a cheap box store hand saw I was very surprised at how well it cut

For a cheap box store hand saw I was very surprised at how well it cut

03-14-2012 07:12 PM by Dan | 7 comments »

I recently picked up a truck full of reclaimed barn wood that needed to be cleaned up and planed. I had a lot of thick boards and some long 10ft boards that were just to big or long to cut comfortably with my RAS. I figured it would be quickest and easiest to cut them with a handsaw. I was using one of my vintage Disston handsaws to do this until I hit a nail which really messed up my saw. Not wanting to risk damaging another one of my vintage saws I decided to just buy one of those new cheap...

Read this review »


Good Cheap Collet Chucks

Good Cheap Collet Chucks

03-03-2017 04:33 PM by OSU55 | 7 comments »

I’ve tried various methods of holding small diameter material in the lathe spindle with varying degrees of success – examples: tool handles or knobs with threaded inserts or a bolt head epoxied into the wood. I had looked at various collet chucking accessories available, with probably the best value at PSI tools, 4 sizes of collets for ~$95. At a wood show recently I saw this from Brown’s Best: Priced at $20, I almost bought one but decided against it, in part because...

Read this review »


Earlex 5500 great for hobbyist or semi-pro

Earlex 5500 great for hobbyist or semi-pro

03-18-2012 08:56 PM by Kevin_S | 7 comments »

I definitely recommend the Earlex 5500. It’s a great sprayer. So far, I’ve used it to spray both shellac and polyurethane and it did a good job on both. I bought it so I could spray shellac on my latest project, but it was so easy to use that I also sprayed my polyurethane top coat with it. Cleanup is really easy, especially with the Teflon lined cup. One of my favorite features is the secure storage for the gun on the unit. I don’t have to look around for a good place to set the gun an...

Read this review »


Couple annoying setup issues, but all in all... I'm pleased.

Couple annoying setup issues, but all in all... I'm pleased.

02-10-2011 04:15 AM by 2bigfeet | 7 comments »

It cuts very nicely. Leaves a glass like finish, is quieter cutting than my old 6” Powermatic model 50, the depth of cut lever moves effortlessly, table and fence are flat as a pancake… bonus. I was a little concerned early on with vibration. I had started it before I had the fence assembly on just to be sure the motor/cutterhead alignment was good. The on/off switch post was vibrating considerably, but after the weight of the fence assembly went on it was steady as a rock. I will...

Read this review »


« prev 1 ... 302 303 304 305 306 307 308 ... 468 next »
4674 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com